[Elecraft] Elecraft CW Net Announcement
Good Evening, Weather has returned to normal: foggy, rainy, and mild. I remember the cold of Wisconsin winters and am not missing it. Hopefully the folks out east will get a reprieve from the icebox soon. Plumbers will be making a lot of money as they repair the numerous broken pipes. The sun may not be blank but it is not very active. With an SFU of 69 propagation won't be very good. As long as I am not skunked the nets will be OK. There is a solar stream due on Monday, maybe that will perk things up a bit. Please join us tomorrow on: 14050 kHz at 2300z Sunday (3 PM PST Sunday) 7045 kHz at 0100z Monday (5 PM PST Sunday) 73, Kevin. KD5ONS _ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] WTB: KAT100
Have a KAT100 ATU languishing on the shelf and in need of a new home? Unbuilt, complete kit preferred, but open to built and properly working units in either the KAT100-1 or KAT100-2 versions. Please email me OFF the forum directly to K8CN -at- arrl.net, and state asking price and unit condition - a photo of the unit with your call sign/QSL card evident is helpful. Thanks! 73, Mike, K8CN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft KIO3B and WSJT-X
That's a good clue, Bert! So turning off the monitor should kill the noise. Easy to test. Funny you mention it. I'm going to test a prospective new monitor today. I'm trying a smaller one so I can fit 2 on the operating desk. I find lots of them are unusable, either the monitor or it's PS generates noise, or they are susceptible to RF. 73 Josh W6XU Sent from my mobile device > On Jan 6, 2018, at 1:49 PM, Bert Rollen wrote: > > Possibly the same issue I have - I find that the bright-white screen palette > on WSJT-X drives the daylights out of my LCD monitor and it generates much > more RFI than with the subdued colors. When full-screen, the waterfall > (which is darker) is substantially quieter than the operations screen. While > I have figured out how to configure the waterfall palette (I use ZL1FZ > palette), I have not found an adjustment for the operations screen. > > I hope that they provide options in upcoming revisions. > > Bert - K4AR > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft KIO3B and WSJT-X
So, you're saying everything is fine with 10 running, and as soon as you open X the S-meter goes up? If you close X with 10 still running does the S-meter go back down? When you disabled CAT control in X, did you close the program and get back to the low noise level, then launch it again seeing the S-meter go back up? If so, with X running did you check in the settings to make sure CAT was still off? When the noise is showing on the S-meter, does unplugging the USB cable make it go away? 73 Josh W6XU Sent from my mobile device > On Jan 6, 2018, at 1:54 PM, Dave S wrote: > > I tried starting 10 first then X and it didn't seem to help. > Yes, the audio config is the same in both programs. > I turned off CAT but once again it didn't help. > > I asked Elecraft tech support about it but they had not heard of another case > and could offer no help. > > > On Saturday, January 6, 2018 12:49 PM, Josh wrote: > > > That's really odd! It's quiet until the program starts? > > What happens if you run 10 and X concurrently? Start up 10 first, it's quiet, > then start X? > > Audio config on X is identical to 10? > > HA!! Try turning off CAT control in WSJT-X. I bet the program is changing > something on the rig to make the noise come up. > > 73, > Josh W6XU > > Sent from my mobile device > > > On Jan 6, 2018, at 11:35 AM, Dave S via Elecraft > > wrote: > > > > After I installed the KIO3B board in my K3, I found that running WSJT-X > > creates 2 or 3 S-units of noise in the rig but WSJT 10 runs quietly.Tried > > different computers, different cables, different jacks, and scads of > > ferrites on the USB cable. Nothing seems to help.Has anyone else run into > > this problem? > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft KIO3B and WSJT-X
I tried starting 10 first then X and it didn't seem to help.Yes, the audio config is the same in both programs.I turned off CAT but once again it didn't help. I asked Elecraft tech support about it but they had not heard of another case and could offer no help. On Saturday, January 6, 2018 12:49 PM, Josh wrote: That's really odd! It's quiet until the program starts? What happens if you run 10 and X concurrently? Start up 10 first, it's quiet, then start X? Audio config on X is identical to 10? HA!! Try turning off CAT control in WSJT-X. I bet the program is changing something on the rig to make the noise come up. 73, Josh W6XU Sent from my mobile device > On Jan 6, 2018, at 11:35 AM, Dave S via Elecraft > wrote: > > After I installed the KIO3B board in my K3, I found that running WSJT-X > creates 2 or 3 S-units of noise in the rig but WSJT 10 runs quietly.Tried > different computers, different cables, different jacks, and scads of ferrites > on the USB cable. Nothing seems to help.Has anyone else run into this problem? > Dave W7OJT > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to j...@voodoolab.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] New release of Win4K3Suite
Hello, There is a new release of Win4K3Suite which now offers support for the SDRPlay RSP1A for use as a panadapter on the K3, KX3 and KX2. This release also offers a few enhancements in display performance as well as ClubLog spot aging. Win4K3Suite is the ultimate control program for your K3S, KX3 and KX2 supporting all options as well as the KPA500, KPA1500 and KAT500 on all radios. It supports the P3, and allows the use of the SDRPlay as well as LPPAN as a panadapter. Win4K3Suite includes virtual port technology allowing sharing of up to 6 software programs or hardware devices with no conflicts. You can see some videos on Win4K3Suite here: https://www.youtube.com/results?search_query=win4k3suite and some reviews here: http://www.eham.net/reviews/detail/11214 There is a ffree 30 day trial available at va2fsq.com 73 Tom P.S. I would be interested to hear from the KPA1500 users that are using the software. --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft KIO3B and WSJT-X
That's really odd! It's quiet until the program starts? What happens if you run 10 and X concurrently? Start up 10 first, it's quiet, then start X? Audio config on X is identical to 10? HA!! Try turning off CAT control in WSJT-X. I bet the program is changing something on the rig to make the noise come up. 73, Josh W6XU Sent from my mobile device > On Jan 6, 2018, at 11:35 AM, Dave S via Elecraft > wrote: > > After I installed the KIO3B board in my K3, I found that running WSJT-X > creates 2 or 3 S-units of noise in the rig but WSJT 10 runs quietly.Tried > different computers, different cables, different jacks, and scads of ferrites > on the USB cable. Nothing seems to help.Has anyone else run into this problem? > Dave W7OJT > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to j...@voodoolab.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Elecraft KIO3B and WSJT-X
After I installed the KIO3B board in my K3, I found that running WSJT-X creates 2 or 3 S-units of noise in the rig but WSJT 10 runs quietly.Tried different computers, different cables, different jacks, and scads of ferrites on the USB cable. Nothing seems to help.Has anyone else run into this problem? Dave W7OJT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com