[Elecraft] Elecraft CW Net Announcement
Good Evening, It was cool and sunny this week, perfect for splitting wood and marking the last property line. Now it is foggy, wet, and cool. All that firewood makes a cozy fire. The loggers have moved in some heavy equipment with more due on Monday. For the next month I won't need to set an alarm clock. A gust of solar wind is due on the 11th, a little late for our nets. However, there was a tiny sunspot this week. It faded rapidly after breaking the long spotless period. This spot is interesting not only for its existence but it is of the new cycle's polarity. Propagation won't improve immediately but there is hope. Please join us tomorrow on: 14050 kHz at 2200z Sunday (2 PM PST Sunday) 7047 kHz at z Monday (4 PM PST Sunday) 73, Kevin. KD5ONS - __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] case for KX3?
Good evening, Mike: I definitely concur with Steve in leaving room to have enough padding on all sides. Just now, I checked as I have an unused Apache 1800. My KX3 would fit; however, there is not enough room for padding on the sides. With the left side of the KX3 almost touching the interior wall, the BNC connector was about half an inch or so from the right wall. The 2800 would have more than enough room. For reference, I keep mine in a Pelican 1200, and there is just enough room for the transceiver, hand mic, and power cable. I hope this helps. 73, Chris, AC4MP > On Nov 9, 2019, at 9:13 PM, Steve Hull wrote: > > I have my KX3 & PX3 in an Apache 3800 and the KXPA100 in a 2800. No > experience with the 1800. In general, the Apache cases offer good > protection and value. I have no idea how well the KX3 fits inside the > 1800, but be sure to leave room for foam on all sides. In fact, I'd > probably suggest the 2800 because that leaves extra room for cables and > other stuff. > > On Sat, Nov 9, 2019, 5:31 PM Mike Maloney wrote: > >> Anyone had experience packing a KX3 in an Apache 1800 waterproof case from >> Harbor Freight? Saw the case today at HF and looked like it would fit >> okay for good transport protection. >> 73, Mike AC5P >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to shull2...@gmail.com > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kk4...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] case for KX3?
I have my KX3 & PX3 in an Apache 3800 and the KXPA100 in a 2800. No experience with the 1800. In general, the Apache cases offer good protection and value. I have no idea how well the KX3 fits inside the 1800, but be sure to leave room for foam on all sides. In fact, I'd probably suggest the 2800 because that leaves extra room for cables and other stuff. On Sat, Nov 9, 2019, 5:31 PM Mike Maloney wrote: > Anyone had experience packing a KX3 in an Apache 1800 waterproof case from > Harbor Freight? Saw the case today at HF and looked like it would fit > okay for good transport protection. > 73, Mike AC5P > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to shull2...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Uploading voice files to K3 DVR?
Record them. There is no file transfer protocol defined to upload audio clips to the KDVR3. 73, Lyle KK7P Sent from my iPhone > On Nov 9, 2019, at 4:01 PM, Eric - Gmail wrote: > > Is it possible to upload voice files to the DVR in the K3, or do I have to > record them directly? > > Thanks, > > Eric W3DQ > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kk7p4...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Using dynamic mic on KX-3?
Kevin, I have not looked into the DX Engineering adapter to see how it is wired. You should get that information from DXE. What is apparently conflicting advice comes from the fact that all Heil ProSets are not equal and not all are supplied with an adapter. There are 2 basic types, one (like the Elecraft ProSet-K2 and the Heil ProSet-iC) use electret elements which need bias like your MH3. Others use a dynamic element and should not have bias applied. With that being said, take a look at the microphone plug on your ProSet - is it a mono plug (most are), and then look at the KX3 microphone jack pinout in the KX3 manual. When using an adapter such as the one from DXE, you have to look at the wiring for the adapter as well. Note that the KX3 microphone jack is a 4 circuit jack. The tip is AF, and the Sleeve is the shield (AF return). But the Ring1 and Ring2 will be shorted to the shield (Ground) by a mono plug. To prevent the KX3 from going into transmit when you insert a mono plug, you will have to turn MIC BTN to OFF. If you have an adapter, you may be able to leave MIC BTN set to PTT. Furthmore IF your microphone has a stereo (3 conductor) plug, then you can leave MIC BTN set to PTT if your microphone cable has an input for a PTT switch. What I am saying is that you have to compare the wiring of the mic plug on the Heil mic with the wiring of the KX3 mic jack. Since you are using the adapter from DXE, they should be able to provide the best information to you. 73, Don W3FPR On 11/9/2019 4:13 PM, Kevin Zembower via Elecraft wrote: Hello, new subscriber here. Thanks for setting up this list. I'm trying to connect a Heil Pro Set Elite headphones and mic to a KX-3. I'm confused by what I'm thinking is conflicting advice. The Heil mic has a dynamic element, while the KX-3 is normally used with the MH-3 mic with an electret element requiring bias voltage. I'm using the HLN-AD-1-KX3 adapter from DXEngineering to connect them. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] case for KX3?
Anyone had experience packing a KX3 in an Apache 1800 waterproof case from Harbor Freight? Saw the case today at HF and looked like it would fit okay for good transport protection. 73, Mike AC5P __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Using dynamic mic on KX-3?
> On Nov 9, 2019, at 3:56 PM, Jim Rhodes wrote: > > Set the mic gain and compression as the manual says. Or set the mic gain and compression for your voice. Also set TX EQ. The manual is a great start, but I collected some other ideas from this list and wrote a blog article. For example, you can use the DVR to listen to the settings. That allows you to hear your voice as other operators will hear it, without bone conduction. https://observer.wunderwood.org/2015/09/09/transmit-audio-and-compression-with-the-elecraft-kx3/ wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Uploading voice files to K3 DVR?
Is it possible to upload voice files to the DVR in the K3, or do I have to record them directly? Thanks, Eric W3DQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Using dynamic mic on KX-3?
No, not all Heil prosets use a condenser mike. Only the ones made for Icom rigs. If you bought yours from Elecraft that is probably what you have. Both of mine are not and have a dynamic elements. You can safely experiment with your KX3 by turning the power down to 0.0, at that stting on power out is generated and you can safely set the mic gain and compression and if you listen with headphones and turn the monitor level up you can hear what you will sound like on the air. Set the mic gain and compression as the manual says. Jim Rhodes K0XU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Using dynamic mic on KX-3?
Dang. Replace "should leave MIC BTN to PTT” with "should set MIC BTN to PTT”. wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On Nov 9, 2019, at 3:42 PM, Walter Underwood wrote: > > The Elecraft Heil Proset uses an electret mic element, so it needs bias. > Yours uses a dynamic element, so it does not need bias. > > Your adapter from DX Engineering brings out the PTT contacts separately, so > you should leave MIC BTN to PTT. > > wunder > K6WRU > Walter Underwood > CM87wj > http://observer.wunderwood.org/ (my blog) > >> On Nov 9, 2019, at 3:13 PM, Kevin Zembower via Elecraft >> wrote: >> >> Hello, new subscriber here. Thanks for setting up this list. >> >> I'm trying to connect a Heil Pro Set Elite headphones and mic to a KX-3. I'm >> confused by what I'm thinking is conflicting advice. The Heil mic has a >> dynamic element, while the KX-3 is normally used with the MH-3 mic with an >> electret element requiring bias voltage. I'm using the HLN-AD-1-KX3 adapter >> from DXEngineering to connect them. >> >> With regard to RTFM: I found the section on page 38 regarding MIC BIAS and >> MIC BTN. I understand that I should set MIC BIAS to OFF for the Heil >> headset. I think I should also set the MIC BTN to PTT, because I have a foot >> pedal connected to the adapter. >> >> However, I'm confused by the flyer at >> https://ftp.elecraft.com/KX3/Manuals%20Downloads/E740174%20Proset%20for%20the%20KX3%20Rev%20A.pdf >> which seems to indicate that MIC BIAS should be ON, and MIC BTN OFF to >> disable all PTT switches. This indicates that the transmitter should be >> triggered only by VOX or the XMIT front panel switch. >> >> And, also confusing, I found the email thread at >> http://elecraft.365791.n2.nabble.com/Microphone-Setup-tp7609912.html which >> is for the K3. I wasn't sure if this advice for the K3 could also be applied >> to the KX-3. In particular, the note at >> http://elecraft.365791.n2.nabble.com/Microphone-Setup-tp7609912p7609921.html >> uses a MIC SEL menu option, which doesn't seem to be available on the KX-3. >> It does have lots of detailed information about settings for TX EQ which I'd >> like to use if applicable. >> >> I only have the opportunity to use the KX-3 at our club shack, about once a >> week, so I can't just turn to it and experiment. I'm also worried about >> causing permanent damage to either the radio or the headset by just trying >> things out. >> >> Any advice to clear up my confusion? Thanks for any help and guidance. >> >> -Kevin >> KC3KZ >> >> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to wun...@wunderwood.org > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to wun...@wunderwood.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Using dynamic mic on KX-3?
The Elecraft Heil Proset uses an electret mic element, so it needs bias. Yours uses a dynamic element, so it does not need bias. Your adapter from DX Engineering brings out the PTT contacts separately, so you should leave MIC BTN to PTT. wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On Nov 9, 2019, at 3:13 PM, Kevin Zembower via Elecraft > wrote: > > Hello, new subscriber here. Thanks for setting up this list. > > I'm trying to connect a Heil Pro Set Elite headphones and mic to a KX-3. I'm > confused by what I'm thinking is conflicting advice. The Heil mic has a > dynamic element, while the KX-3 is normally used with the MH-3 mic with an > electret element requiring bias voltage. I'm using the HLN-AD-1-KX3 adapter > from DXEngineering to connect them. > > With regard to RTFM: I found the section on page 38 regarding MIC BIAS and > MIC BTN. I understand that I should set MIC BIAS to OFF for the Heil headset. > I think I should also set the MIC BTN to PTT, because I have a foot pedal > connected to the adapter. > > However, I'm confused by the flyer at > https://ftp.elecraft.com/KX3/Manuals%20Downloads/E740174%20Proset%20for%20the%20KX3%20Rev%20A.pdf > which seems to indicate that MIC BIAS should be ON, and MIC BTN OFF to > disable all PTT switches. This indicates that the transmitter should be > triggered only by VOX or the XMIT front panel switch. > > And, also confusing, I found the email thread at > http://elecraft.365791.n2.nabble.com/Microphone-Setup-tp7609912.html which is > for the K3. I wasn't sure if this advice for the K3 could also be applied to > the KX-3. In particular, the note at > http://elecraft.365791.n2.nabble.com/Microphone-Setup-tp7609912p7609921.html > uses a MIC SEL menu option, which doesn't seem to be available on the KX-3. > It does have lots of detailed information about settings for TX EQ which I'd > like to use if applicable. > > I only have the opportunity to use the KX-3 at our club shack, about once a > week, so I can't just turn to it and experiment. I'm also worried about > causing permanent damage to either the radio or the headset by just trying > things out. > > Any advice to clear up my confusion? Thanks for any help and guidance. > > -Kevin > KC3KZ > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to wun...@wunderwood.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Using dynamic mic on KX-3?
Hello, new subscriber here. Thanks for setting up this list. I'm trying to connect a Heil Pro Set Elite headphones and mic to a KX-3. I'm confused by what I'm thinking is conflicting advice. The Heil mic has a dynamic element, while the KX-3 is normally used with the MH-3 mic with an electret element requiring bias voltage. I'm using the HLN-AD-1-KX3 adapter from DXEngineering to connect them. With regard to RTFM: I found the section on page 38 regarding MIC BIAS and MIC BTN. I understand that I should set MIC BIAS to OFF for the Heil headset. I think I should also set the MIC BTN to PTT, because I have a foot pedal connected to the adapter. However, I'm confused by the flyer at https://ftp.elecraft.com/KX3/Manuals%20Downloads/E740174%20Proset%20for%20the%20KX3%20Rev%20A.pdf which seems to indicate that MIC BIAS should be ON, and MIC BTN OFF to disable all PTT switches. This indicates that the transmitter should be triggered only by VOX or the XMIT front panel switch. And, also confusing, I found the email thread at http://elecraft.365791.n2.nabble.com/Microphone-Setup-tp7609912.html which is for the K3. I wasn't sure if this advice for the K3 could also be applied to the KX-3. In particular, the note at http://elecraft.365791.n2.nabble.com/Microphone-Setup-tp7609912p7609921.html uses a MIC SEL menu option, which doesn't seem to be available on the KX-3. It does have lots of detailed information about settings for TX EQ which I'd like to use if applicable. I only have the opportunity to use the KX-3 at our club shack, about once a week, so I can't just turn to it and experiment. I'm also worried about causing permanent damage to either the radio or the headset by just trying things out. Any advice to clear up my confusion? Thanks for any help and guidance. -Kevin KC3KZ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K4 ETA Date?
Thanks Gary, I hadn’t looked at that page for a while. 73 Lou - St. Louis, MO "The difference between stupidity and genius is that genius has its limits." Albert Einstein -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K4 ETA Date?
According to their pre-order page, January is the target date. https://elecraft.com/pages/k4-pre-order I have my order in :) 73, Gary KA1J > Any update on the ETA for the first deliveries of the K4? > > 73, Lou, W0FK > > > > - > St. Louis, MO > > "The difference between stupidity and genius is that > genius has its limits." Albert Einstein > > > -- > Sent from: http://elecraft.365791.n2.nabble.com/ > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to g...@ka1j.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K4 ETA Date?
Any update on the ETA for the first deliveries of the K4? 73, Lou, W0FK - St. Louis, MO "The difference between stupidity and genius is that genius has its limits." Albert Einstein -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KAT500 remote
I am trying to use KAT500 remote progrsm to control my KAT500 but I can't get any connection. If I use KAT500 utility it works quite OK and I get contact. Anyone who has an advice what I do wrong ? Hans SM6BGA. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
