[Elecraft] Correction on QSO Today Ham Expo link

[Wayne Burdick]

The original link I sent was to QSO today (the organizer), not Vfairs (the expo 
itself). To register, to to:

   qsotoday.vfairs.com

73,
Wayne
N6KR





__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Cable for K3 to Expert 1.3K-FA

[James F. Boehner MD via Elecraft]

Joe,

I don't know if you have received this information, but I have cables that I
ordered from Dan Tassell of Expert Linears: kc5p...@att.net .  He makes plug
and play cables for various rigs to interface with the Expert Linears.  He
does good work and stands behind his products.  More information is on their
website http://expertlinears.com/ .

'73 de JIM N2ZZ



-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Adrian
Sent: Friday, August 07, 2020 10:09 PM
To: 'Elecraft Reflector'
Cc: spe-amplifi...@groups.io; dx...@groups.io; elecraft...@groups.io
Subject: Re: [Elecraft] Cable for K3 to Expert 1.3K-FA

Joe, just a note on SPE amplifier interfacing, is that not all rigs are
supported for cat frequency read interfacing or even band switching.

This is essential for the SPE atu (if fitted and active), to set its tune
setting before first keyup on band preventing a possible swr alarm and
switch to strandby.
Without CAT freq read the ATU had then used SPE internal RF sense freq
counter  during that keyup, but not fast enough to prevent that initial
alarm, 
so the amp still needs to be switched back to 'Operate' to continue, so CAT
freq tracking is very convenient for the ATU to function before first keyup
on band.

I found DXLab Commander an excellent program in between SPE and transceiver
to solve these situations

For the Elecraft KX3 SPE with freq/band follow ;

https://youtu.be/k87_lkO4mmY

I also use it with my FTDX101MP to follow the SUB freq as well (does not
work direct connected), The FT991 profile in SPE, and secondary Commander
CAT
works fine with either the MP and KX3 as primary Commander CAT connection.
The amp has two inputs and 2 cat connections as you know. 
The Commander program is easily switched between the two, or a start profile
setup for each transceiver.

The CAT connection from SPE to PC has DB9 2&3 reversed or a nullmodem patch
cable inserted in series with usual rig cat cable for rs-232 setups.

Adrian Fewster

VK4TUX


> Anybody got a spare cable to run from K3 to Expert 1.3K-FA they would 
> like to part with?
> 73,
> Joe

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to jboehne...@yahoo.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Ham Expo has begun....

[Bill Frantz]

Bingo. I didn't see the login button, and wouldn't have clicked it on my own.

73 Bill AE6JV

On 8/7/20 at 9:58 PM, j...@n7us.net (Jim McDonald) wrote:

> Go to https://qsotoday.vfairs.com/ and click the Login button.
> 
> Jim N7US
> 
> -Original Message-
> From: elecraft-boun...@mailman.qth.net  On
> Behalf Of Bill Frantz
> Sent: Friday, August 7, 2020 20:54
> To: Wayne Burdick 
> Cc: Elecraft Reflector 
> Subject: Re: [Elecraft] Ham Expo has begun
> 
> OK. I registered for the expo, but have no idea of how to get there. When I
> go to  there is a "Click here to get to the
> expo" button, but when click it, I just get a webpage with information about
> what is coming.
> 
> 73 Bill AE6JV
> 
> On 8/7/20 at 9:27 PM, n...@elecraft.com (Wayne Burdick) wrote:
> 
> >Note to all who are interested in the Expo:
> >
> >Our demos don't start until tomorrow morning, but attendees can visit 
> >the Exhibitor booths now. We're already there, available to answer 
> >questions or just ragchew
> 
> 
-
Bill Frantz| Airline peanut bag: "Produced  | Periwinkle
(408)348-7900  | in a facility that processes   | 150 Rivermead Rd #235
www.pwpconsult.com | peanuts and other nuts." - Duh | Peterborough, NH 03458

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Cable for K3 to Expert 1.3K-FA

[Adrian]

Joe, just a note on SPE amplifier interfacing, is that not all rigs are
supported for cat frequency read interfacing or even band switching.

This is essential for the SPE atu (if fitted and active), to set its tune
setting before first keyup on band preventing a possible swr alarm and
switch to strandby.
Without CAT freq read the ATU had then used SPE internal RF sense freq
counter  during that keyup, but not fast enough to prevent that initial
alarm, 
so the amp still needs to be switched back to 'Operate' to continue, so CAT
freq tracking is very convenient for the ATU to function before first keyup
on band.

I found DXLab Commander an excellent program in between SPE and transceiver
to solve these situations

For the Elecraft KX3 SPE with freq/band follow ;

https://youtu.be/k87_lkO4mmY

I also use it with my FTDX101MP to follow the SUB freq as well (does not
work direct connected), The FT991 profile in SPE, and secondary Commander
CAT
works fine with either the MP and KX3 as primary Commander CAT connection.
The amp has two inputs and 2 cat connections as you know. 
The Commander program is easily switched between the two, or a start profile
setup for each transceiver.

The CAT connection from SPE to PC has DB9 2&3 reversed or a nullmodem patch
cable inserted in series with usual rig cat cable for rs-232 setups.

Adrian Fewster

VK4TUX


> Anybody got a spare cable to run from K3 to Expert 1.3K-FA they would 
> like to part with?
> 73,
> Joe

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Ham Expo has begun....

[Dave]

https://qsotoday.vfairs.com/

73
Dave wo2x



Sent from my iPad

> On Aug 7, 2020, at 9:56 PM, Bill Frantz  wrote:
> 
> OK. I registered for the expo, but have no idea of how to get there. When I 
> go to  there is a "Click here to get to the 
> expo" button, but when click it, I just get a webpage with information about 
> what is coming.
> 
> 73 Bill AE6JV
> 
>> On 8/7/20 at 9:27 PM, n...@elecraft.com (Wayne Burdick) wrote:
>> 
>> Note to all who are interested in the Expo:
>> 
>> Our demos don't start until tomorrow morning, but attendees can visit the 
>> Exhibitor booths now. We're already there, available to answer questions or 
>> just ragchew
> 
> ---
> Bill Frantz| Truth and love must prevail  | Periwinkle
> (408)348-7900  | over lies and hate.  | 150 Rivermead Rd #235
> www.pwpconsult.com |   - Vaclav Havel | Peterborough, NH 03458
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rocke...@gmail.com 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Ham Expo has begun....

[Jim McDonald]

Go to https://qsotoday.vfairs.com/ and click the Login button.

Jim N7US

-Original Message-
From: elecraft-boun...@mailman.qth.net  On
Behalf Of Bill Frantz
Sent: Friday, August 7, 2020 20:54
To: Wayne Burdick 
Cc: Elecraft Reflector 
Subject: Re: [Elecraft] Ham Expo has begun

OK. I registered for the expo, but have no idea of how to get there. When I
go to  there is a "Click here to get to the
expo" button, but when click it, I just get a webpage with information about
what is coming.

73 Bill AE6JV

On 8/7/20 at 9:27 PM, n...@elecraft.com (Wayne Burdick) wrote:

>Note to all who are interested in the Expo:
>
>Our demos don't start until tomorrow morning, but attendees can visit 
>the Exhibitor booths now. We're already there, available to answer 
>questions or just ragchew


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Ham Expo has begun....

[Bill Frantz]

OK. I registered for the expo, but have no idea of how to get 
there. When I go to  there is a 
"Click here to get to the expo" button, but when click it, I 
just get a webpage with information about what is coming.


73 Bill AE6JV

On 8/7/20 at 9:27 PM, n...@elecraft.com (Wayne Burdick) wrote:


Note to all who are interested in the Expo:

Our demos don't start until tomorrow morning, but attendees can 
visit the Exhibitor booths now. We're already there, available 
to answer questions or just ragchew


---
Bill Frantz| Truth and love must prevail  | Periwinkle
(408)348-7900  | over lies and hate.  | 150 
Rivermead Rd #235
www.pwpconsult.com |   - Vaclav Havel | 
Peterborough, NH 03458


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Ham Expo has begun....

[Wayne Burdick]

Note to all who are interested in the Expo:

Our demos don't start until tomorrow morning, but attendees can visit the 
Exhibitor booths now. We're already there, available to answer questions or 
just ragchew

73,
Wayne
N6KR

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 training

[Bill Frantz]

Thanks Wayne.

With the manual online, and support for jumping to the relevant 
section, it will be better than what I have with the K3, where 
the manual is on my computer and I have to text search for the 
relevant section. The neat thing is that the online manual can 
be automatically updated with new versions of the firmware.


73 Bill AE6JV

On 8/7/20 at 2:10 PM, n...@elecraft.com (Wayne Burdick) wrote:


Hi Bill,

Yes, the built-in Info System (accessed by tapping the "?" 
button) is a unique feature of the K4. We're refining it as we 
go along. It will be available for preview/comment at some point.


73,
Wayne
N6KR



On Aug 7, 2020, at 10:57 AM, Bill Frantz  wrote:

I have a vague memory that the K4 was supposed to include a built-in help 
system. I can see it as

being just showing the relevant section of the manual, but it might be 
different.


Is it currently available, or is it waiting for the manual. or is something 
different?

73 Bill AE6JV

On 8/7/20 at 11:47 AM, r...@tavan.com (Rick Tavan) wrote:


The menu structure is simpler and includes more text.



Bill Frantz|"Insofar as the propositions of mathematics 
refer to
408-348-7900   | reality, they are not certain; and insofar 
they are
www.pwpconsult.com | certain, they do not refer to reality.” 
-- Einstein


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 Transmit Timeout for Remote Operation

[Dana Roode K6NR]

I've been using my K3 remote for many years.  I'm using VNC to a
controlling PC to operate the K3 and a variety of other equipment.  I have
relied on an imperfect external solution to protect against runaway
transmission.

I've seen postings to the list over the years about a timeout that
tracks when the PTT is on and triggers TX Inhibit if its on more than a
defined length of time, resetting when PTT goes off.  Does anyone have a
circuit for this to share or other suggestions?  I imagine a 555 timer or
the like with the right interfaces to the K3.  I understand that some of
the Remote Radio interfaces have this built in, but I'm not using them.

  Dana
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3/100/ATU basic TRX For Sale

[Jan]

*Open for offer *~ basic Elecraft K3/100/ATU serial 6153 [clean; non smoker]

with 2.7kHz  & 50Hz filters & KIO3, HM2 hand-mike,dc cord and manual

Estate item needs a new home; Shipped via FedEx ground/insured [double 
boxed]


/Make me an offer/ on this; pay by check or money order

Regards, Jan K1ND  ~ 40 years in S.E. Michigan ~



--
This email has been checked for viruses by AVG.
https://www.avg.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] FS Elecraft K3 w/options SOLD

[NS9I WI]

SOLD SOLD

On 8/7/2020 8:18 AM, NS9I WI wrote:

S/N #3095 (Mfd May 23, 2009)

1. KRX3 HIGH-PERFORMANCE SUBRECEIVER
2. KAT3 100-WATT AUTOMATIC ANTENNA TUNER
3. KIO3BUPKT KIO3B Upgrade Kits USB Cable to computer, 6-12M Pre-amp
4. KSYN3A SYNTHESIZERS Upgrade including one for the sub-rcvr
5. KPA3  Internal 100 W Upgrade
6. Standard 2.7 kHz 5 pole filter in Main and Sub
7. KFL3A-250 250 Hz, 8-pole in Main
8. KFL3A-400 400HZ 8-POLE in Main
9. INRAD 700 Hz 8-POLE in Main
10. MH-4 Hand Mike

Been back to Elecraft a couple of times, all the available updates 
have been done and most recently in fall of 2019, the latest LPA board 
was installed,
Gold Pins;   6 pins for 12V, KPA3 to KPAIO3 Riser, and Front Panel, 
P30 and P35


Includes: DC cable to power strip (powerpole connectors)
Original Box - Elecraft K3S & P3 by Fred Cady (Design, Configuration, 
and Operation) book and the original manual.


Asking $2,400 (OBO), shipped from NE Wisconsin. Paypal or USPS M.O.

73 Dwight NS9I

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@bayland.net 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Test - please ignore

[LA7NO]

Test





-
73,

Per-Tore / LA7NO

--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 training

[Buck]

Wayne, you think of everything.

Buck, k4ia
Honor Roll
8BDXCC
EasyWayHamBooks.com

On 8/7/2020 2:10 PM, Wayne Burdick wrote:

Hi Bill,

Yes, the built-in Info System (accessed by tapping the "?" button) is a unique 
feature of the K4. We're refining it as we go along. It will be available for 
preview/comment at some point.

73,
Wayne
N6KR



On Aug 7, 2020, at 10:57 AM, Bill Frantz  wrote:

I have a vague memory that the K4 was supposed to include a built-in help 
system. I can see it as being just showing the relevant section of the manual, 
but it might be different.

Is it currently available, or is it waiting for the manual. or is something 
different?

73 Bill AE6JV

On 8/7/20 at 11:47 AM, r...@tavan.com (Rick Tavan) wrote:


The menu structure is simpler and includes more text.


---
Bill Frantz| "The only thing we have to   | Periwinkle
(408)348-7900  | fear is fear itself." - FDR  | 150 Rivermead Rd #235
www.pwpconsult.com | Inaugural address, 3/4/1933  | Peterborough, NH 03458

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@elecraft.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to radiok...@gmail.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [KPA500] 270V ERR

[Jack Brindle via Elecraft]

It sounds like you really need to contact the tech support guys for this one. 
The small cable from the microswitch plugs into the Power Supply board. Make 
sure it is properly seated. It is behind the big toroid transformer, so you may 
have to move that to check. The signal indicating that 270V is bad comes from 
the PA module to the front panel over the ribbon cable that is permanently 
attached to the PA sandwich. Make sure that cable is securely plugged into the 
front panel connector.

The 270V is enabled when the KPA500 goes into OPER mode. If you always get this 
fault when switching from STBY to OPER, it is an indication that something is 
not right in the power supply. Again, contact Customer Support to get their 
help in tracing this down.

To specifically answer your question, it is ’NO'. The IO board has no part in 
getting the 270V supply going, checked, and reported to the front panel board.

Good luck getting the KPA500 going again. It is a great amplifier! But then I’m 
a bit biased…

73!
Jack Brindle, W6FB
Elecraft Engineering

> On Aug 7, 2020, at 9:11 AM, LA7NO  wrote:
> 
> Hello,
> 
> We are constantly getting the "270V ERR" when switching over to OPER.
> We have checked that the micro-switch is working properly and is correctly
> operated by the lid.
> We have also tried the power reset, but still the same.
> 
> We know there is a problem with the I/O card, since we are not able to get a
> PC connected to the serial port - RS232 (PC).
> So, we can not use the KPA500 Utility Program.
> 
> Is it in any way possible that a fault on the I/O-card can cause the "270V
> ERR" message?
> 
> 73,
> 
> Per-Tore
> LA7NO
> 
> 
> 
> 
> -
> 73,
> 
> Per-Tore / LA7NO
> 
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jackbrin...@me.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 training

[Wayne Burdick]

Hi Bill,

Yes, the built-in Info System (accessed by tapping the "?" button) is a unique 
feature of the K4. We're refining it as we go along. It will be available for 
preview/comment at some point.

73,
Wayne
N6KR


> On Aug 7, 2020, at 10:57 AM, Bill Frantz  wrote:
> 
> I have a vague memory that the K4 was supposed to include a built-in help 
> system. I can see it as being just showing the relevant section of the 
> manual, but it might be different.
> 
> Is it currently available, or is it waiting for the manual. or is something 
> different?
> 
> 73 Bill AE6JV
> 
> On 8/7/20 at 11:47 AM, r...@tavan.com (Rick Tavan) wrote:
> 
>> The menu structure is simpler and includes more text.
> 
> ---
> Bill Frantz| "The only thing we have to   | Periwinkle
> (408)348-7900  | fear is fear itself." - FDR  | 150 Rivermead Rd #235
> www.pwpconsult.com | Inaugural address, 3/4/1933  | Peterborough, NH 03458
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@elecraft.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KX2 3D/X-ray model live demo at QSO Today Ham Expo

[Wayne Burdick]

Recorded, yes, but I'm not sure when it will be posted. 

Love to have everyone there, if possible. Bearing personal witness to my first 
sojourn into the Wilds of Zoom may have entertainment value that transcends 
content.

Wayne


> On Aug 7, 2020, at 10:55 AM, Eric Garner  wrote:
> 
> Is the presentation going to be recorded for viewing later for those of us 
> who cant make it this weekend?
> 
> Eric 
> 
> On Fri, Aug 7, 2020, 9:33 AM Wayne Burdick  wrote:
> Curious about how the KX2 and other Elecraft products were designed? One of 
> the most important steps in the process is 3D modeling. 
> 
> On both Saturday and Sunday, I'll be doing live demos of the KX2, including a 
> full tour of the radio's 3D model. This will include:
> 
>  - building a virtual KX2, one assembly at a time
>  - xray imaging to illustrate efficient space utilization
>  - KXPD2 model (the paddle is directly 3D printed for production)
>  - discussion and live Q on design choices, hardware, batteries, etc.
> 
> As mentioned in the previous email, we'll be doing live demos of all major 
> project lines at the QSO Today Ham Expo this weekend (visit the Expo  
> Website  
> to register). To sign up for any of the demos, just click on Booth/Demo 
> Schedule when you visit our booth.  
> 
> 73,
> Wayne
> N6KR
> 
> 
> -
> 
> Elecraft...Full-Contact Ham Radio
> www.elecraft.com 
> 
> QSO Today Ham Expo gold sponsor; August 8-9, 2020   
> www.qsotodayhamexpo.com 
> 
> 
> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to garn...@gmail.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KX2 3D/X-ray model live demo at QSO Today Ham Expo

[Mark Musick]

It is my understanding Eric that the presentations will be kept on line for 30 
days for later viewing.

73,
Mark, WB9CIF

-Original Message-
From: elecraft-boun...@mailman.qth.net  On 
Behalf Of Eric Garner
Sent: Friday, August 7, 2020 17:56
To: Wayne Burdick 
Cc: Elecraft Reflector 
Subject: Re: [Elecraft] KX2 3D/X-ray model live demo at QSO Today Ham Expo

Is the presentation going to be recorded for viewing later for those of us who 
cant make it this weekend?

Eric

On Fri, Aug 7, 2020, 9:33 AM Wayne Burdick  wrote:

> Curious about how the KX2 and other Elecraft products were designed? 
> One of the most important steps in the process is 3D modeling.
>
> On both Saturday and Sunday, I'll be doing live demos of the KX2, 
> including a full tour of the radio's 3D model. This will include:
>
>  - building a virtual KX2, one assembly at a time
>  - xray imaging to illustrate efficient space utilization
>  - KXPD2 model (the paddle is directly 3D printed for production)
>  - discussion and live Q on design choices, hardware, batteries, etc.
>
> As mentioned in the previous email, we'll be doing live demos of all 
> major project lines at the QSO Today Ham Expo this weekend (visit the 
> Expo  < 
> https://nam01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.
> qsotodayhamexpo.com%2Fdata=02%7C01%7C%7C73c56633bc204ac9e28408d83
> afb7bc0%7C84df9e7fe9f640afb435%7C1%7C0%7C63732419906558239
> 6sdata=LiSDYc0%2BRK1XLhE%2FK43MznWET9Mtm2X1bI0u%2B23YPJk%3Dr
> eserved=0>Website 
>  .qsotodayhamexpo.com%2Fdata=02%7C01%7C%7C73c56633bc204ac9e28408d8
> 3afb7bc0%7C84df9e7fe9f640afb435%7C1%7C0%7C6373241990655923
> 90sdata=GLWtHHLniGFT1083oVFWNTTidgB%2FiaBZQdQ9akZKGC0%3Drese
> rved=0> to register). To sign up for any of the demos, just click on 
> Booth/Demo Schedule when you visit our booth.
>
> 73,
> Wayne
> N6KR
>
>
> -
>
> Elecraft...Full-Contact Ham Radio
> https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.e
> lecraft.com%2Fdata=02%7C01%7C%7C73c56633bc204ac9e28408d83afb7bc0%
> 7C84df9e7fe9f640afb435%7C1%7C0%7C637324199065592390sd
> ata=tALerfBBIDSiVROLAa7XPBT4p%2BUCJVYiBzYJCHhADnk%3Dreserved=0 
>  elecraft.com%2Fdata=02%7C01%7C%7C73c56633bc204ac9e28408d83afb7bc0
> %7C84df9e7fe9f640afb435%7C1%7C0%7C637324199065592390s
> data=tALerfBBIDSiVROLAa7XPBT4p%2BUCJVYiBzYJCHhADnk%3Dreserved=0>
>
> QSO Today Ham Expo gold sponsor; August 8-9, 2020
> https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.q
> sotodayhamexpo.com%2Fdata=02%7C01%7C%7C73c56633bc204ac9e28408d83a
> fb7bc0%7C84df9e7fe9f640afb435%7C1%7C0%7C637324199065592390
> sdata=%2FmIc8WN6edouYgWzF4yfyBVHsel9BR%2B%2FvTPBeufOYoM%3Dre
> served=0 
>  qsotodayhamexpo.com%2Fdata=02%7C01%7C%7C73c56633bc204ac9e28408d83
> afb7bc0%7C84df9e7fe9f640afb435%7C1%7C0%7C63732419906559239
> 0sdata=%2FmIc8WN6edouYgWzF4yfyBVHsel9BR%2B%2FvTPBeufOYoM%3Dr
> eserved=0>
>
>
>
>
> __
> Elecraft mailing list
> Home: 
> https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailm
> an.qth.net%2Fmailman%2Flistinfo%2Felecraftdata=02%7C01%7C%7C73c56
> 633bc204ac9e28408d83afb7bc0%7C84df9e7fe9f640afb435%7C1%7C0
> %7C637324199065592390sdata=%2FnLIXFA%2BXoYKp5MM0SWA98XQTiJz85%2BM
> g84X5XWuR1w%3Dreserved=0
> Help: 
> https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailm
> an.qth.net%2Fmmfaq.htmdata=02%7C01%7C%7C73c56633bc204ac9e28408d83
> afb7bc0%7C84df9e7fe9f640afb435%7C1%7C0%7C63732419906560238
> 7sdata=vAIeSvJJx5S5coFZmE15Fan5LE%2BCyRbBuGOn8s21w4w%3Dreser
> ved=0
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: 
> https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.q
> sl.net%2Fdata=02%7C01%7C%7C73c56633bc204ac9e28408d83afb7bc0%7C84d
> f9e7fe9f640afb435%7C1%7C0%7C637324199065602387sdata=t
> jOTnhCaIXtCXUPFpQ0x8ykJBuOylss4b8e0pp7PUkw%3Dreserved=0
> Please help support this email list: 
> https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.q
> sl.net%2Fdonate.htmldata=02%7C01%7C%7C73c56633bc204ac9e28408d83af
> b7bc0%7C84df9e7fe9f640afb435%7C1%7C0%7C637324199065602387&
> amp;sdata=oDf3yoycP1PCwt2xr4jpNYlYqFWAYlQ4Goicm1LgOsM%3Dreserved=
> 0 Message delivered to garn...@gmail.com
__
Elecraft mailing list
Home: 
https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmailman%2Flistinfo%2Felecraftdata=02%7C01%7C%7C73c56633bc204ac9e28408d83afb7bc0%7C84df9e7fe9f640afb435%7C1%7C0%7C637324199065602387sdata=TfOlNUQTbPi8bDfwI582UbvRxmx301YAqfCqr0Q9U80%3Dreserved=0
Help: 

Re: [Elecraft] K4 training

[Rick Tavan]

The "?" Help trigger is there but I think the text is pending completion of
the manual on which it will be based.

/Rick N6XI

On Fri, Aug 7, 2020 at 10:57 AM Bill Frantz  wrote:

> I have a vague memory that the K4 was supposed to include a
> built-in help system. I can see it as being just showing the
> relevant section of the manual, but it might be different.
>
> Is it currently available, or is it waiting for the manual. or
> is something different?
>
> 73 Bill AE6JV
>
> On 8/7/20 at 11:47 AM, r...@tavan.com (Rick Tavan) wrote:
>
> >The menu structure is simpler and includes more text.
>
> ---
> Bill Frantz| "The only thing we have to   | Periwinkle
> (408)348-7900  | fear is fear itself." - FDR  | 150
> Rivermead Rd #235
> www.pwpconsult.com | Inaugural address, 3/4/1933  |
> Peterborough, NH 03458
>
>

-- 
--

Rick Tavan
Truckee and Saratoga, CA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 training

[Bill Frantz]

I have a vague memory that the K4 was supposed to include a 
built-in help system. I can see it as being just showing the 
relevant section of the manual, but it might be different.


Is it currently available, or is it waiting for the manual. or 
is something different?


73 Bill AE6JV

On 8/7/20 at 11:47 AM, r...@tavan.com (Rick Tavan) wrote:


The menu structure is simpler and includes more text.


---
Bill Frantz| "The only thing we have to   | Periwinkle
(408)348-7900  | fear is fear itself." - FDR  | 150 
Rivermead Rd #235
www.pwpconsult.com | Inaugural address, 3/4/1933  | 
Peterborough, NH 03458


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KX2 3D/X-ray model live demo at QSO Today Ham Expo

[Eric Garner]

Is the presentation going to be recorded for viewing later for those of us
who cant make it this weekend?

Eric

On Fri, Aug 7, 2020, 9:33 AM Wayne Burdick  wrote:

> Curious about how the KX2 and other Elecraft products were designed? One
> of the most important steps in the process is 3D modeling.
>
> On both Saturday and Sunday, I'll be doing live demos of the KX2,
> including a full tour of the radio's 3D model. This will include:
>
>  - building a virtual KX2, one assembly at a time
>  - xray imaging to illustrate efficient space utilization
>  - KXPD2 model (the paddle is directly 3D printed for production)
>  - discussion and live Q on design choices, hardware, batteries, etc.
>
> As mentioned in the previous email, we'll be doing live demos of all major
> project lines at the QSO Today Ham Expo this weekend (visit the Expo  <
> https://www.qsotodayhamexpo.com/>Website 
> to register). To sign up for any of the demos, just click on Booth/Demo
> Schedule when you visit our booth.
>
> 73,
> Wayne
> N6KR
>
>
> -
>
> Elecraft...Full-Contact Ham Radio
> www.elecraft.com 
>
> QSO Today Ham Expo gold sponsor; August 8-9, 2020
> www.qsotodayhamexpo.com 
>
>
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to garn...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] 20m CW + KPA1500 = Comcast Disconnect

[Jim Brown]

On 8/6/2020 10:13 PM, eric norris via Elecraft wrote:

It drops constantly, all hours of the day and night.


Eric,

I had that problem for years here in the house I bought in NorCal. 
Turned out to be a 6dB attenuator that the Comcast installer had added 
to the tap-off that already had the right attenuation. Removed the 
attenuator and it's been rock solid. Earlier, I had found flaky coax 
connectors inside their box. So the modem was starved for signal. I 
understand these systems -- I installed them in Chicago in places like 
Sears Tower. :)


73, Jim K9YC




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KX2 3D/X-ray model live demo at QSO Today Ham Expo

[Grant Youngman]

Except for the indoor flea market, ability to knob twiddle, photos and a beer 
with friends, and the profuse sweat generated from trekking through the outdoor 
flea in 100 deg weather, 4 times, it’s starting to look like this Virtual Expo 
is going to be a great event.  Especially at the Elecraft booth …

Grant NQ5T

> On Aug 7, 2020, at 12:31 PM, Wayne Burdick  wrote:
> 
> Curious about how the KX2 and other Elecraft products were designed? One of 
> the most important steps in the process is 3D modeling. 
> 
> On both Saturday and Sunday, I'll be doing live demos of the KX2, including a 
> full tour of the radio's 3D model. This will include:
> 
> - building a virtual KX2, one assembly at a time
> - xray imaging to illustrate efficient space utilization
> - KXPD2 model (the paddle is directly 3D printed for production)
> - discussion and live Q on design choices, hardware, batteries, etc.
> 
> As mentioned in the previous email, we'll be doing live demos of all major 
> project lines at the QSO Today Ham Expo this weekend (visit the Expo  
> Website  
> to register). To sign up for any of the demos, just click on Booth/Demo 
> Schedule when you visit our booth.  
> 
> 73,
> Wayne
> N6KR
> 
> 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [KPA500] 270V ERR

[Augie "Gus" Hansen]

Be certain that both ends of the heavy power cable between the PS and 
the amp are properly installed. Unplug the power pole connectors and 
reinsert them fully until you hear and feel the click.


This ERR indication happened to my KPA1500 recently because the APP on 
the amp end was slightly loose. I have revised my cabling layout to put 
some strain relief on that heavy cable to prevent this problem from 
recurring.


Gus Hansen
KB0YH (proud son of Norway!)


On 8/7/2020 10:11 AM, LA7NO wrote:

Hello,

We are constantly getting the "270V ERR" when switching over to OPER.
We have checked that the micro-switch is working properly and is correctly
operated by the lid.
We have also tried the power reset, but still the same.

We know there is a problem with the I/O card, since we are not able to get a
PC connected to the serial port - RS232 (PC).
So, we can not use the KPA500 Utility Program.

Is it in any way possible that a fault on the I/O-card can cause the "270V
ERR" message?



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] Cable for K3 to Expert 1.3K-FA

[Bob Wilson, N6TV]

Joe,

A single cable can work, but it may not be the ideal solution for the long
run, should your equipment expand or change.

Instead of a custom K3 to SPE cable, consider an alternative that will
allow stock cables to work, no matter which radio or amplifier you want to
connect.  I designed the Serial Box (S-BOX ) to make
it easy to connect the K3 (or any modern transceiver) to any device
designed to monitor serial port traffic for automatic band switching and
auto-tuning, including all SPE Expert amplifiers and most ACOM automatic
amplifiers, plust the Elecraft KPA1500 and any serial port band decoders /
antenna switches and SteppIR controllers.  The goal was to allow all of
these devices to track the transmit frequency of the transceiver
automatically (not just the band), with all devices switching at the same
time.  The S-BOX can also be configured to support the custom "null-modem"
connection from the 9-pin SPE "PORT" terminal to a SteppIR controller, if
you have more than one transceiver connected to the SPE, and are using both
inputs.  The SPE firmware automatically translates the frequency data of
the active radio to a common format for the SteppIR controller.

Using a simple cable with "Band Data" pins on the K3 ACC connector (instead
of serial data) isn't ideal if you intend to use the Expert's built-in
tuner on some band segments, because that cable only provides band
information to the amplifier, instead of frequency information to the tuner.

Using a simple cable to the K3 RS-232 connector precludes using it for
other purposes, such as a logging program.

The S-BOX was designed to work around these common interconnection issues.

73,
Bob, N6TV
https://bit.ly/S-BOX


On Thu, Aug 6, 2020 at 7:06 AM K4PX K4PX  wrote:

> Anybody got a spare cable to run from K3 to Expert 1.3K-FA they would like
> to part with?
> 73,
> Joe
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@arrl.net
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] KX2 3D/X-ray model live demo at QSO Today Ham Expo

[Wayne Burdick]

Curious about how the KX2 and other Elecraft products were designed? One of the 
most important steps in the process is 3D modeling. 

On both Saturday and Sunday, I'll be doing live demos of the KX2, including a 
full tour of the radio's 3D model. This will include:

 - building a virtual KX2, one assembly at a time
 - xray imaging to illustrate efficient space utilization
 - KXPD2 model (the paddle is directly 3D printed for production)
 - discussion and live Q on design choices, hardware, batteries, etc.

As mentioned in the previous email, we'll be doing live demos of all major 
project lines at the QSO Today Ham Expo this weekend (visit the Expo  
Website  to 
register). To sign up for any of the demos, just click on Booth/Demo Schedule 
when you visit our booth.  

73,
Wayne
N6KR


-

Elecraft...Full-Contact Ham Radio
www.elecraft.com 

QSO Today Ham Expo gold sponsor; August 8-9, 2020   
www.qsotodayhamexpo.com 




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Saturday & Sunday, all day: Live demos of Elecraft products at QSO Today Ham Expo

[Wayne Burdick]

Hi all,

As you may know, Elecraft is a gold sponsor of the QSO Today Ham Expo this 
weekend. We'd love to have you drop by our booth.

In addition to new video content, we'll have our product specialists and 
designers available, running live demos all day both Saturday and Sunday. We'll 
be taking questions in real time, providing operating tips, discussing design 
details, etc. 

To sign up for any of the demos, just click on Booth/Demo Schedule when you 
visit our booth.  

Not registered for the Expo yet?  Registration is free; just visit the Expo  
Website .

73,
Wayne
N6KR


-

Elecraft...Full-Contact Ham Radio
www.elecraft.com

QSO Today Ham Expo gold sponsor; August 8-9, 2020   
www.qsotodayhamexpo.com




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] [KPA500] 270V ERR

[LA7NO]

Hello,

We are constantly getting the "270V ERR" when switching over to OPER.
We have checked that the micro-switch is working properly and is correctly
operated by the lid.
We have also tried the power reset, but still the same.

We know there is a problem with the I/O card, since we are not able to get a
PC connected to the serial port - RS232 (PC).
So, we can not use the KPA500 Utility Program.

Is it in any way possible that a fault on the I/O-card can cause the "270V
ERR" message?

73,

Per-Tore
LA7NO




-
73,

Per-Tore / LA7NO

--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K4 training

[Rick Tavan]

Video tutorials would be a good idea, Gary. I wouldn't encourage Elecraft
to delay K4 shipment until they are available, though. I suspect
owner-produced vids will surface quickly and will be helpful for some.

For what it's worth, as an experienced K3 user, I felt comfortable with my
field test K4 *immediately* and very comfortable after an hour of simply
poking around. The connections are plug-compatible. The UI metaphors are
consistent.The menu structure is simpler and includes more text. There are,
of course, some differences and new features, especially around the
gorgeous display. (P3 experience will help there.) Most of the features are
easily discoverable. Most Elecraft veterans won't need more than a brief
tip sheet/application note explaining new stuff. Owners who are new to
Elecraft may find videos helpful. A typically excellent Elecraft Owner's
Manual (not yet available) will round out the doc set.

It's a great radio and will be well worth the wait!

73,

/Rick N6XI

On Mon, Aug 3, 2020 at 11:05 PM Gary Smith  wrote:

> I would really like it if when the K4 is
> released, there were also released on the
> same day, training videos showing what to
> push, what to enter, a how-to set of
> videos covering different topics of
> interest.
>
> Either a bunch of short ones on a web
> page, sorted by topic & exactly to the
> point so they'd be easy to find and could
> be easily replayed till the idea is
> understood. That, or a good legend
> accompanying a long, more encompassing
> presentation with reference time marks to
> know where to search for a given
> demonstration.
>
> We all learn differently, I have 11 years
> of college under my belt, but in my old
> age I still say I learn best by observing
> a demonstration than otherwise.
>
> But that's just me.
>
> 73,
>
> Gary
> KA1J
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rta...@gmail.com
>


-- 
--

Rick Tavan
Truckee and Saratoga, CA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] FS Elecraft K3 w/options

[NS9I WI]

S/N #3095 (Mfd May 23, 2009)

1. KRX3 HIGH-PERFORMANCE SUBRECEIVER
2. KAT3 100-WATT AUTOMATIC ANTENNA TUNER
3. KIO3BUPKT KIO3B Upgrade Kits USB Cable to computer, 6-12M Pre-amp
4. KSYN3A SYNTHESIZERS Upgrade including one for the sub-rcvr
5. KPA3  Internal 100 W Upgrade
6. Standard 2.7 kHz 5 pole filter in Main and Sub
7. KFL3A-250 250 Hz, 8-pole in Main
8. KFL3A-400 400HZ 8-POLE in Main
9. INRAD 700 Hz 8-POLE in Main
10. MH-4 Hand Mike

Been back to Elecraft a couple of times, all the available updates have 
been done and most recently in fall of 2019, the latest LPA board was 
installed,
Gold Pins;   6 pins for 12V, KPA3 to KPAIO3 Riser, and Front Panel, P30 
and P35


Includes: DC cable to power strip (powerpole connectors)
Original Box - Elecraft K3S & P3 by Fred Cady (Design, Configuration, 
and Operation) book and the original manual.


Asking $2,400 (OBO), shipped from NE Wisconsin. Paypal or USPS M.O.

73 Dwight NS9I

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com