Re: [Elecraft] K4: "R" in display
Yes,Ludwig, it works OK, now! I use Thunderbird as well and have set it to plain text from the start using it. I am against any markup. It has been asked many times to change that on the qth.net mailman and many times was responded with "no" by the maintainers. Users that send both should know that markup is removed and only the plain text part is distributed. Data is money so keep the data as small as possible. 73, Peter Op 09-09-2021 om 13:46 schreef Ludwig Hechler: Oops, I'm sorry! I configured my Thunderbird and hope it works now. Here is my text again. Hi folks, finally my K4 has arrived in DL. And here is my first question. What is the "R" in the display below the filter icon of the SUB RX? The upper part of the "R" is white, the lower part is yellow. Some illustrations in the Introduction to the Elecraft K4, e.g. the page RECEIVER CONTROLS AND ICONS, show the icon K4D at this position. Mine is a basic K4 without D. thanks & 73, Lui, DL6FBR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] NR after changing bands
Mike's message was a tongue in cheek response to (part of) Ludwig's earlier message. I'm not sure why it showed up as a separate thread. Please be kinder to your fellow list members. It costs you nothing and makes the world a more pleasant place. 73, Julie On Thu, Sep 9, 2021, 16:52 Mike Morrow wrote: > Would you care to take the time to express WHATEVER you are trying to ask > clearly and coherently...indicating as well SPECIFICALLY which of > Elecraft's products has you so confused? They have made more than one > transceiver model in the past 23 years. > > Mike / KK5F > -Original Message- > From: Andy Durbin > Sent: Sep 9, 2021 8:08 AM > To: elecraft@mailman.qth.net > Subject: [Elecraft] NR after changing bands > > "Am I crazy or is this real?" > > Are these conditions mutually exclusive? > > 73, > Andy, k3wyc > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to k...@earthlink.net > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to ju...@juliatuttle.net > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] W2 200w HF couplers for sale
I have 2 brand new never used (due to an order mistake that I made) 200W HF couplers for the W2 watt meter that I would like to part with. They are literally brand new in the box! https://elecraft.com/products/dchf-200a_1-8-54-mhz-0-1-200w-additional-coupler My mistake is your gain as the car sales man said. LOL $360 US for the pair and I'll ship for free via Canada Post ground to Canada and the lower 48. Payment via PayPal Goods only (not friends and family). Email me off the list if you are interested. Canadians, the normal dollar conversion applies. Mike va3mw __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] NR after changing bands
Would you care to take the time to express WHATEVER you are trying to ask clearly and coherently...indicating as well SPECIFICALLY which of Elecraft's products has you so confused? They have made more than one transceiver model in the past 23 years. Mike / KK5F -Original Message- From: Andy Durbin Sent: Sep 9, 2021 8:08 AM To: elecraft@mailman.qth.net Subject: [Elecraft] NR after changing bands "Am I crazy or is this real?" Are these conditions mutually exclusive? 73, Andy, k3wyc __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k...@earthlink.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] NR after changing bands
"Am I crazy or is this real?" Are these conditions mutually exclusive? 73, Andy, k3wyc __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] NR after changing bands
Hi again (and thanks for the "R"/"DR" explanation). Here is an observation with the noice reduction NR. The bands are quite noisy here. So I use NR ADJUST set to 4 or 5. - When I last used the 40m band, mode was LSB, bandwidth was 2.8 kHz, and NR was ON. - Switch from some other band back to 40m. - Disable NR and immediatly re-enable it again. - For me it seems that the noise levels (the audio) before disabling NR and after re-enabling it are (quite a bit) different. But they shouldn't. The test with the 40m band is just an example. I (think I) observe this on other bands as well. Am I crazy or is this real? Lui, DL6FBR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K4: "R" in display
This question arose on the K4 groups.io list recently. The "R" is actually a "D" superposed over "R" - the white portion is the "D" and the entire character is the "R." The indicator shows that Dynamic Range optimization is ON. Mike, K8CN (hoping that Santa Claus may inadvertently drop a K4D down my chimney this Christmas!) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K4: "R" in display
Oops, I'm sorry! I configured my Thunderbird and hope it works now. Here is my text again. Hi folks, finally my K4 has arrived in DL. And here is my first question. What is the "R" in the display below the filter icon of the SUB RX? The upper part of the "R" is white, the lower part is yellow. Some illustrations in the Introduction to the Elecraft K4, e.g. the page RECEIVER CONTROLS AND ICONS, show the icon K4D at this position. Mine is a basic K4 without D. thanks & 73, Lui, DL6FBR On 09.09.2021 13:18, Peter Eijlander (PA0PJE) wrote: Hi Ludwig, You should write mails in plain text on this reflector. HTML-only mails come through completely empty. Attachments are also not allowed and will be stripped as well! 73, Peter - PA0PJE Op 09-09-2021 om 08:37 schreef Ludwig Hechler: __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to pa0...@xs4all.nl __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to l.hech...@posteo.de __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K4: "R" in display
Oh, so *that's* why that happens! It seems like it would be more user friendly for the reflector to bounce mails with attachments or with no plain-text message. On Thu, Sep 9, 2021, 07:19 Peter Eijlander (PA0PJE) wrote: > Hi Ludwig, > > You should write mails in plain text on this reflector. > HTML-only mails come through completely empty. > > Attachments are also not allowed and will be stripped as well! > > 73, > Peter - PA0PJE > > Op 09-09-2021 om 08:37 schreef Ludwig Hechler: > > > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to pa0...@xs4all.nl > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to ju...@juliatuttle.net > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K4: "R" in display
Hi Ludwig, You should write mails in plain text on this reflector. HTML-only mails come through completely empty. Attachments are also not allowed and will be stripped as well! 73, Peter - PA0PJE Op 09-09-2021 om 08:37 schreef Ludwig Hechler: __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to pa0...@xs4all.nl __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
