Re: [Elecraft] TL922
On 2023-03-29 15:05, Robin wrote: I THINK the 100 volts is minus The relay keying voltage is generally negative on tube linears. It does double duty - runs the relays, and biases the tubes off during receive. - Jerry, KF6VB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] TL922
I did the softkey mod in a contest expedition recently and it worked just fine. some physical difficulty mounting the board without adequate hardware I THINK the 100 volts is minus and the K3 will NOT key a negative voltage - ANY negative voltage. My old XBand transverter had a minus 24 volt relay key line, and the K3 will not key it, it just comes on solid with the protection diode conducting. Robin WA6CDR - Original Message - From: To: Sent: Wednesday, March 29, 2023 05:25 Subject: Elecraft Digest, Vol 227, Issue 8 Message: 20 Date: Wed, 29 Mar 2023 09:02:32 +0200 From: Josep Torres To: Elecraft Reflector Subject: [Elecraft] TL-922 Message-ID: <92622f2e-c040-405a-8628-475677661...@aol.com> Content-Type: text/plain; charset=utf-8 Hi guys, Have a couple of Kenwood TL-922?s around and was thinking to connect one to a K3. Has anybody done so.? And if so, how have you done the wiring.? Got 2 K3?s (in fact I have 3 of ?em, but one not physically at now now) and maybe one day I can use the spare one with a TL-922 from another QTH. Thanks, 73, Josep EA6BF BUG #256 - CWops #3072 - FOC #2182 (ex 1724) -- Message: 21 Date: Wed, 29 Mar 2023 01:04:38 -0700 From: Jim Brown To: elecraft@mailman.qth.net Subject: Re: [Elecraft] TL-922 Message-ID: <4b3a3ac2-7d6f-258b-c061-46657a574...@audiosystemsgroup.com> Content-Type: text/plain; charset=UTF-8; format=flowed On 3/29/2023 12:02 AM, Josep Torres via Elecraft wrote: Have a couple of Kenwood TL-922?s around and was thinking to connect one to a K3. Hi Josep, I don't know that amp, but I've got K3s that I've used with both Elecraft and non-Elecraft amps -- three different Ten Tec models, an ACOM, and an Expert. In all cases, it was a matter of figuring out what pin on what connector puts the amp in TX mode, and using the Power setting on the K3 to set drive level. For all of those amps, a simple through cable from the K3 Key Out jack to the amp Key In worked. In general, the manuals for both K3 and the amps are our friend. You've got a great station -- I'm near San Francisco, and we've worked on CW on 160, 80, and 10! Not an easy path. 73, Jim K9YC -- Message: 22 Date: Wed, 29 Mar 2023 05:35:37 -0400 From: Ken Winterling To: j...@audiosystemsgroup.com Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] TL-922 Message-ID: Content-Type: text/plain; charset="UTF-8" Be careful with the TL-922. An unmodified TL-922 has about 100VDC on the keying line. I'm not familiar with the K3 so I don't know if its keying circuit can handle that voltage/current. I would check the K3 manual for its keying circuit specifications and also measure the TL-922 keying line voltage. You may need a keying line buffer (small relay or solid state high voltage transistor) between the K3 and the amp. *Ken* *WA2LBI* On Wed, Mar 29, 2023 at 4:05?AM Jim Brown wrote: On 3/29/2023 12:02 AM, Josep Torres via Elecraft wrote: > Have a couple of Kenwood TL-922?s around and was thinking to connect one to a K3. Hi Josep, I don't know that amp, but I've got K3s that I've used with both Elecraft and non-Elecraft amps -- three different Ten Tec models, an ACOM, and an Expert. In all cases, it was a matter of figuring out what pin on what connector puts the amp in TX mode, and using the Power setting on the K3 to set drive level. For all of those amps, a simple through cable from the K3 Key Out jack to the amp Key In worked. In general, the manuals for both K3 and the amps are our friend. You've got a great station -- I'm near San Francisco, and we've worked on CW on 160, 80, and 10! Not an easy path. 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to wa2...@gmail.com -- Message: 23 Date: Wed, 29 Mar 2023 07:03:33 -0400 From: Paul Dluehosh To: Josep Torres Cc: Elecraft Reflector Subject: Re: [Elecraft] TL-922 Message-ID: <2373cfb6-ef2c-bf28-c8f2-fa129b72e...@gmail.com> Content-Type: text/plain; charset=UTF-8; format=flowed Josep, Maybe this product can help you safely connect your K3 keying to a Kenwood TL-922: https://harbachelectronics.com/shop/kenwood-tl-922/sk-922-soft-key-keying-interface/ I have recently added it to a TL-922 which was being keyed by a K3. 73, Paul -- N4PD On 29-Mar-23 03:02, Josep Torres via Elecraft wrote: Hi guys, Have a couple of Kenwood TL-922?s around and was thinking to connect one to a K3. Has anybody done so.? And if so, how have you done the wiring.? Got 2 K3?s (in fact I have 3 of ?em, but one not physically at now now) and maybe one day I can use the spare one with a TL-922 from another QTH. Thanks, 73
Re: [Elecraft] TL-922
Yes, the K3 can only handle key out of +200 VDC at 5A... Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ VP2EHZ Moderator: North American QRO Group at Groups.IO. Moderator: Amateur Radio Builders Group at Groups.IO. email: b...@wjschmidt.com -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of James F. Boehner, MD via Elecraft Sent: Wednesday, March 29, 2023 6:55 AM To: 'Josep Torres' ; 'Elecraft Reflector' Subject: Re: [Elecraft] TL-922 Josep, Be sure to install a soft-key interface in the TL-922 before hooking it up to the K3. https://harbachelectronics.com/shop/kenwood-tl-922/sk-922-soft-key-keying-interface/ The newer rigs were not meant to handle the voltages on the older amplifier's keying circuits. I modified mine with the soft-key board and added the new capacitor block. '73 de JIM N2ZZ -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Josep Torres via Elecraft Sent: Wednesday, March 29, 2023 3:03 AM To: Elecraft Reflector Subject: [Elecraft] TL-922 Hi guys, Have a couple of Kenwood TL-922’s around and was thinking to connect one to a K3. Has anybody done so.? And if so, how have you done the wiring.? Got 2 K3’s (in fact I have 3 of ‘em, but one not physically at now now) and maybe one day I can use the spare one with a TL-922 from another QTH. Thanks, 73, Josep EA6BF BUG #256 - CWops #3072 - FOC #2182 (ex 1724) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to jboehne...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to b...@wjschmidt.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] TL-922
The TL-922 does not have snubber diodes across it 100V relays. The back EMF spike will kill the KeyOut circuit in the K3. *ALWAYS* use a key line buffer with a TL-922 that has not been fitted with a soft key circuit. 73, ... Joe, W4TV On 3/29/2023 8:25 AM, Mark Musick wrote: Per the K3 manual page 17 the K3 can key +200VDC @ 5A. No need to have a key line buffer if the amp keying voltage and current meet those specs. 73, Mark, WB9CIF -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of James F. Boehner, MD via Elecraft Sent: Wednesday, March 29, 2023 11:55 To: 'Josep Torres' ; 'Elecraft Reflector' Subject: Re: [Elecraft] TL-922 Josep, Be sure to install a soft-key interface in the TL-922 before hooking it up to the K3. https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fharbachelectronics.com%2Fshop%2Fkenwood-tl-922%2Fsk-922-soft-key-keying-interface%2F&data=05%7C01%7C%7C3477a90435fe4f56f8db08db304cb2c8%7C84df9e7fe9f640afb435%7C1%7C0%7C638156878191285160%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=CtTlkUMq2f5c%2B0nckmeEK0YKKnhuYA1WQzNFfEbCFbo%3D&reserved=0 The newer rigs were not meant to handle the voltages on the older amplifier's keying circuits. I modified mine with the soft-key board and added the new capacitor block. '73 de JIM N2ZZ -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Josep Torres via Elecraft Sent: Wednesday, March 29, 2023 3:03 AM To: Elecraft Reflector Subject: [Elecraft] TL-922 Hi guys, Have a couple of Kenwood TL-922's around and was thinking to connect one to a K3. Has anybody done so.? And if so, how have you done the wiring.? Got 2 K3's (in fact I have 3 of 'em, but one not physically at now now) and maybe one day I can use the spare one with a TL-922 from another QTH. Thanks, 73, Josep EA6BF BUG #256 - CWops #3072 - FOC #2182 (ex 1724) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] TL-922
Per the K3 manual page 17 the K3 can key +200VDC @ 5A. No need to have a key line buffer if the amp keying voltage and current meet those specs. 73, Mark, WB9CIF -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of James F. Boehner, MD via Elecraft Sent: Wednesday, March 29, 2023 11:55 To: 'Josep Torres' ; 'Elecraft Reflector' Subject: Re: [Elecraft] TL-922 Josep, Be sure to install a soft-key interface in the TL-922 before hooking it up to the K3. https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fharbachelectronics.com%2Fshop%2Fkenwood-tl-922%2Fsk-922-soft-key-keying-interface%2F&data=05%7C01%7C%7C3477a90435fe4f56f8db08db304cb2c8%7C84df9e7fe9f640afb435%7C1%7C0%7C638156878191285160%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=CtTlkUMq2f5c%2B0nckmeEK0YKKnhuYA1WQzNFfEbCFbo%3D&reserved=0 The newer rigs were not meant to handle the voltages on the older amplifier's keying circuits. I modified mine with the soft-key board and added the new capacitor block. '73 de JIM N2ZZ -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Josep Torres via Elecraft Sent: Wednesday, March 29, 2023 3:03 AM To: Elecraft Reflector Subject: [Elecraft] TL-922 Hi guys, Have a couple of Kenwood TL-922's around and was thinking to connect one to a K3. Has anybody done so.? And if so, how have you done the wiring.? Got 2 K3's (in fact I have 3 of 'em, but one not physically at now now) and maybe one day I can use the spare one with a TL-922 from another QTH. Thanks, 73, Josep EA6BF BUG #256 - CWops #3072 - FOC #2182 (ex 1724) __ Elecraft mailing list Home: https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmailman%2Flistinfo%2Felecraft&data=05%7C01%7C%7C3477a90435fe4f56f8db08db304cb2c8%7C84df9e7fe9f640afb435%7C1%7C0%7C638156878191285160%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=TnNk0aWDZx2zqwqjCpM96FtptQ6s8wMoceSmXHx5Bcs%3D&reserved=0 Help: https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmmfaq.htm&data=05%7C01%7C%7C3477a90435fe4f56f8db08db304cb2c8%7C84df9e7fe9f640afb435%7C1%7C0%7C638156878191285160%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=yLjqUd9p7z89NiPgSCwCJD7%2BWK8BGeslWucLMvtn65A%3D&reserved=0 Post: mailto:Elecraft@mailman.qth.net This list hosted by: https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2F&data=05%7C01%7C%7C3477a90435fe4f56f8db08db304cb2c8%7C84df9e7fe9f640afb435%7C1%7C0%7C638156878191285160%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=OsG5V37ZsiXO%2F5OgCeaQWjb4MJjFNzPAVsUdugzZ%2B84%3D&reserved=0 Please help support this email list: https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2Fdonate.html&data=05%7C01%7C%7C3477a90435fe4f56f8db08db304cb2c8%7C84df9e7fe9f640afb435%7C1%7C0%7C638156878191285160%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=CkZvZcySDIL%2BsBzX0PkvYlKHUkuTRcAU5jBsBIsLZJI%3D&reserved=0 Message delivered to jboehne...@yahoo.com __ Elecraft mailing list Home: https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmailman%2Flistinfo%2Felecraft&data=05%7C01%7C%7C3477a90435fe4f56f8db08db304cb2c8%7C84df9e7fe9f640afb435%7C1%7C0%7C638156878191285160%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=TnNk0aWDZx2zqwqjCpM96FtptQ6s8wMoceSmXHx5Bcs%3D&reserved=0 Help: https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fmailman.qth.net%2Fmmfaq.htm&data=05%7C01%7C%7C3477a90435fe4f56f8db08db304cb2c8%7C84df9e7fe9f640afb435%7C1%7C0%7C638156878191285160%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=yLjqUd9p7z89NiPgSCwCJD7%2BWK8BGeslWucLMvtn65A%3D&reserved=0 Post: mailto:Elecraft@mailman.qth.net This list hosted by: https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2F&data=05%7C01%7C%7C3477a90435fe4f56f8db08db304cb2c8%7C84df9e7fe9f640afb435%7C1%7C0%7C638156878191285160%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=OsG5V37ZsiXO%2F5OgCeaQWjb4MJjFNzPAVsUdugzZ%2B84%3D&reserved=0 Please help support this email list: https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.qsl.net%2Fdonate.html&data=05%7C01%7C%7C3477a90435fe4f56f8db08db304cb2c8%7C84df9e7fe9f640afb435%7C1%7
Re: [Elecraft] TL-922
Josep, Be sure to install a soft-key interface in the TL-922 before hooking it up to the K3. https://harbachelectronics.com/shop/kenwood-tl-922/sk-922-soft-key-keying-interface/ The newer rigs were not meant to handle the voltages on the older amplifier's keying circuits. I modified mine with the soft-key board and added the new capacitor block. '73 de JIM N2ZZ -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Josep Torres via Elecraft Sent: Wednesday, March 29, 2023 3:03 AM To: Elecraft Reflector Subject: [Elecraft] TL-922 Hi guys, Have a couple of Kenwood TL-922’s around and was thinking to connect one to a K3. Has anybody done so.? And if so, how have you done the wiring.? Got 2 K3’s (in fact I have 3 of ‘em, but one not physically at now now) and maybe one day I can use the spare one with a TL-922 from another QTH. Thanks, 73, Josep EA6BF BUG #256 - CWops #3072 - FOC #2182 (ex 1724) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to jboehne...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] TL-922
Josep, Maybe this product can help you safely connect your K3 keying to a Kenwood TL-922: https://harbachelectronics.com/shop/kenwood-tl-922/sk-922-soft-key-keying-interface/ I have recently added it to a TL-922 which was being keyed by a K3. 73, Paul -- N4PD On 29-Mar-23 03:02, Josep Torres via Elecraft wrote: Hi guys, Have a couple of Kenwood TL-922’s around and was thinking to connect one to a K3. Has anybody done so.? And if so, how have you done the wiring.? Got 2 K3’s (in fact I have 3 of ‘em, but one not physically at now now) and maybe one day I can use the spare one with a TL-922 from another QTH. Thanks, 73, Josep EA6BF BUG #256 - CWops #3072 - FOC #2182 (ex 1724) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to radio.n...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] TL-922
Be careful with the TL-922. An unmodified TL-922 has about 100VDC on the keying line. I'm not familiar with the K3 so I don't know if its keying circuit can handle that voltage/current. I would check the K3 manual for its keying circuit specifications and also measure the TL-922 keying line voltage. You may need a keying line buffer (small relay or solid state high voltage transistor) between the K3 and the amp. *Ken* *WA2LBI* On Wed, Mar 29, 2023 at 4:05 AM Jim Brown wrote: > On 3/29/2023 12:02 AM, Josep Torres via Elecraft wrote: > > Have a couple of Kenwood TL-922’s around and was thinking to connect one > to a K3. > > Hi Josep, > > I don't know that amp, but I've got K3s that I've used with both > Elecraft and non-Elecraft amps -- three different Ten Tec models, an > ACOM, and an Expert. In all cases, it was a matter of figuring out what > pin on what connector puts the amp in TX mode, and using the Power > setting on the K3 to set drive level. For all of those amps, a simple > through cable from the K3 Key Out jack to the amp Key In worked. In > general, the manuals for both K3 and the amps are our friend. > > You've got a great station -- I'm near San Francisco, and we've worked > on CW on 160, 80, and 10! Not an easy path. > > 73, Jim K9YC > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to wa2...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] TL-922
On 3/29/2023 12:02 AM, Josep Torres via Elecraft wrote: Have a couple of Kenwood TL-922’s around and was thinking to connect one to a K3. Hi Josep, I don't know that amp, but I've got K3s that I've used with both Elecraft and non-Elecraft amps -- three different Ten Tec models, an ACOM, and an Expert. In all cases, it was a matter of figuring out what pin on what connector puts the amp in TX mode, and using the Power setting on the K3 to set drive level. For all of those amps, a simple through cable from the K3 Key Out jack to the amp Key In worked. In general, the manuals for both K3 and the amps are our friend. You've got a great station -- I'm near San Francisco, and we've worked on CW on 160, 80, and 10! Not an easy path. 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] TL-922
Hi guys, Have a couple of Kenwood TL-922’s around and was thinking to connect one to a K3. Has anybody done so.? And if so, how have you done the wiring.? Got 2 K3’s (in fact I have 3 of ‘em, but one not physically at now now) and maybe one day I can use the spare one with a TL-922 from another QTH. Thanks, 73, Josep EA6BF BUG #256 - CWops #3072 - FOC #2182 (ex 1724) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
