Re: [Elecraft] Signal source for KX3 temperature frequency calibration

2023-06-14 Thread Wes 
Indeed.  I have one of each.  Two of the Minis is probably a viable alternative 
unless you want two locked signals with a prescribed phase difference.  Of 
course then you need a splitter on the GPS antenna and two USB ports.  One 
problem with these is that they're TCXOs, not OCXOs.  They can take some time to 
establish good lock.


Wes  N7WS


On 6/14/2023 5:05 PM, G4GNX wrote:

Agreed, but as I already have the single frequency version, it will be cheaper 
too just buy another one. 🙂

73,
Alan - G4GNX




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Signal source for KX3 temperature frequency calibration

2023-06-14 Thread G4GNX 
Agreed, but as I already have the single frequency version, it will be cheaper 
too just buy another one. 🙂

73,
Alan - G4GNX




> On 14 Jun 2023, at 22:38, Wes  wrote:
> 
> The Leo Bodnar two-channel GPSDO should give you both frequencies, although 
> setting them is really clunky.  The promised revised software never 
> materialized.
> 
> Wes  N7WS
> 
> On 6/14/2023 11:27 AM, G4GNX wrote:
>> It’s true that both rigs *can* use a 10MHz reference, but the far better way 
>> to run the IC-9700 is by using an injection board which pulls the onboard 
>> TCXO from the GPS reference at 49.152MHz, instead of using the 10MHz input 
>> which is only checked periodically.
>> 
>> The only disadvantage is that 2 different devices are required, one for 
>> 49.152MHz and one for 10MHz (for the K4).
>> 
>> 73,
>> Alan - G4GNX

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Signal source for KX3 temperature frequency calibration

2023-06-14 Thread Wes 
The Leo Bodnar two-channel GPSDO should give you both frequencies, although 
setting them is really clunky.  The promised revised software never materialized.


Wes  N7WS

On 6/14/2023 11:27 AM, G4GNX wrote:

It’s true that both rigs *can* use a 10MHz reference, but the far better way to 
run the IC-9700 is by using an injection board which pulls the onboard TCXO 
from the GPS reference at 49.152MHz, instead of using the 10MHz input which is 
only checked periodically.

The only disadvantage is that 2 different devices are required, one for 
49.152MHz and one for 10MHz (for the K4).

73,
Alan - G4GNX




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Signal source for KX3 temperature frequency calibration

2023-06-14 Thread G4GNX 
It’s true that both rigs *can* use a 10MHz reference, but the far better way to 
run the IC-9700 is by using an injection board which pulls the onboard TCXO 
from the GPS reference at 49.152MHz, instead of using the 10MHz input which is 
only checked periodically.

The only disadvantage is that 2 different devices are required, one for 
49.152MHz and one for 10MHz (for the K4).

73,
Alan - G4GNX




> On 14 Jun 2023, at 17:23, Björn Ekelund  wrote:
> 
> Why not just split the signal to both radios since both use a 10MHz reference?
> Or are they very far apart?
> 
> Björn SM7IUN
> 
> On Wed, Jun 14, 2023 at 4:34 PM G4GNX  > wrote:
>> AFAIK Leo ships Worldwide (perhaps not Russia)!
>> 
>> It’s an excellent device and fully configurable.
>> 
>> I use one on my IC-9700 and it works flawlessly. I’m considering buying 
>> another one for the K4, because I’m a bit OCD. 🤣
>> 
>> 73,
>> Alan - G4GNX
>> 
>> 
>> 
>> > On 14 Jun 2023, at 14:40, Björn Ekelund > > > wrote:
>> > 
>> > I'm not sure they ship to the US but I use this
>> > 
>> > to
>> > calibrate all my radios.
>> > 
>> > Björn SM7IUN
>> > 
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net 
>> 
>> This list hosted by: http://www.qsl.net 
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to bj...@ekelund.nu 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Signal source for KX3 temperature frequency calibration

2023-06-14 Thread Björn Ekelund 
Why not just split the signal to both radios since both use a 10MHz
reference?
Or are they very far apart?

Björn SM7IUN

On Wed, Jun 14, 2023 at 4:34 PM G4GNX  wrote:

> AFAIK Leo ships Worldwide (perhaps not Russia)!
>
> It’s an excellent device and fully configurable.
>
> I use one on my IC-9700 and it works flawlessly. I’m considering buying
> another one for the K4, because I’m a bit OCD. 🤣
>
> 73,
> Alan - G4GNX
>
>
>
> > On 14 Jun 2023, at 14:40, Björn Ekelund  wrote:
> >
> > I'm not sure they ship to the US but I use this
> > <
> https://www.leobodnar.com/shop/index.php?main_page=product_info&cPath=107&products_id=301
> >
> > to
> > calibrate all my radios.
> >
> > Björn SM7IUN
> >
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to bj...@ekelund.nu
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Signal source for KX3 temperature frequency calibration

2023-06-14 Thread G4GNX 
AFAIK Leo ships Worldwide (perhaps not Russia)!

It’s an excellent device and fully configurable.

I use one on my IC-9700 and it works flawlessly. I’m considering buying another 
one for the K4, because I’m a bit OCD. 🤣

73,
Alan - G4GNX



> On 14 Jun 2023, at 14:40, Björn Ekelund  wrote:
> 
> I'm not sure they ship to the US but I use this
> 
> to
> calibrate all my radios.
> 
> Björn SM7IUN
> 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Signal source for KX3 temperature frequencycalibration

2023-06-14 Thread Wes 

https://v3.airspy.us/product/lb-gpsdo-mini/

On 6/14/2023 6:40 AM, Björn Ekelund wrote:

I'm not sure they ship to the US but I use this

to
calibrate all my radios.

Björn SM7IUN



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Signal source for KX3 temperature frequency calibration

2023-06-14 Thread Björn Ekelund 
I'm not sure they ship to the US but I use this

to
calibrate all my radios.

Björn SM7IUN


On Wed, Jun 14, 2023 at 2:31 AM Hank via Elecraft 
wrote:

> The TinySA ultra has many uses in the ham shack.
>
> It has a nice frequency generator function including AM/FM modulation plus
> some nice spectrum analyzer features only found on much more expensive
> devices.
>
> Hank
> K4HYJ
>
> > On Jun 13, 2023, at 12:59 PM, John Harper  wrote:
> >
> > tinySA Ultra:
> > https://www.tinysa.org/wiki/
> >
> > John AE5X
> > https://ae5x.blogspot.com
> >
> >> The XG50 signal generator is no longer available and I’m in need of a
> > stable signal to do the >extended temperature compensation procedure on
> my
> > KX3. I remember a discussion about using >the K3’s external converter
> > output but cannot locate any details.
> >
> >>
> >> Any suggestions?
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to h...@optilink.us
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to bj...@ekelund.nu
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com