Re: [Elecraft] K2 KSDP2 for sale
The KDSP2 has been sold. Dick Housden, W0NTA wrote: > > This KDSP2 was removed from my K2/100. I replaced it with the audio filter > module. Works as it should. Comes with the instruction manual. You can > view images at http://www.w0nta.com/KDSP2.htm . Price $165.00 shipped in > US via Priority Mail. > -- View this message in context: http://n2.nabble.com/K2-KSDP2-for-sale-tp4156562p4159737.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K2 KSDP2 for sale
This KDSP2 was removed from my K2/100. I replaced it with the audio filter module. Works as it should. Comes with the instruction manual. You can view images at http://www.w0nta.com/KDSP2.htm . Price $165.00 shipped in US via Priority Mail. -- View this message in context: http://n2.nabble.com/K2-KSDP2-for-sale-tp4156562p4156562.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 to SteppIR interface communication
Hi Jim, I use a SteppIR with my K3 successfully by setting the baud rate to 4800. Same for the K2. 73, Dick, W0NTA Jim Spears wrote: > > I recently replaced Icom stuff with a K3. Now I am trying to get all the > stuff in the shack that is supposed to communicate with each other to do > so. > Right now I am working on the K3 to SteppIR interface. > > > > I have a clone of the SteppIR "S13" cable and the K3 is connected directly > to the SteppIR "Data In" port. The SteppIR interface is set to "KENW" at > 9600 bps; the K3 RS232 is set to 9600 bps. SteppIR does not follow band > changes. > > > > Anyone got a suggestion for getting this interface to work? > > > > Jim > > N1NK > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- View this message in context: http://n2.nabble.com/K3-to-SteppIR-interface-communication-tp2298144p2298335.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Firmware Rev. 2.76: No AF noise burst; PRE/ATTN independent for sub RX; etc.
Wayne, Thanks so much for correcting the SSB audio issue. It works just fine now. Merry Christmas and Happy New Year to you and all the Elecraft crew. 73, Dick, W0NTA wayne burdick wrote: > > K3 beta-test firmware revision 2.76 (with DSP rev 1.98) is now > available. See release notes below. > > Please send any problem reports to k3supp...@elecraft.com. For > instructions on how to load beta firmware, please see: > >http://www.elecraft.com/K3/k3_software.htm > > 73, > Wayne > N6KR > > * * * > > MCU 2.76 / DSP 1.98, 12-21-2008 > > * POWER-ON AF NOISE BURST: This should now be eliminated. > > * DIGIT 2 SWITCH TONE FEEDBACK RESTORED. The ‘2’ key on the numeric > keypad now provides tone feedback when used for numeric entry or within > menu entries. There’s no tone when it’s used as “REV” (temporary A/B VFO > reverse). > > * SSB TX AFTER VFO A/B SWAP: Transmit filter settings are now correct > after any A/B swap, regardless of the modes of VFO A and B. This had > been > noted by some customers as a problem on power-up, but it could occur > anytime the VFOs were in different modes at the time of an A/B swap. > > * INDEPENDENT PREAMP AND ATTN FOR SUB RECEIVER: The preamp > and attenuator settings for the receiver are now independent of main. > On each band, you can set up the sub’s preamp/attenuator as desired > using BSET. The sub’s preamp/attenuator are separate even in diversity > mode, where you’ll often be using a lower-gain antenna for the sub > receiver. > Note: A second tap of A>B within the 2-second window still copies all > main receiver settings to the sub, including preamp and attenuator. > > For software developers: > > * “FR0” COMMAND (SPLIT CANCEL): Now correctly restores the VFO A arrow > icon. > > * CONFIG:KPA3 MENU ENTRY: The parameter for this menu entry is now > accessible via the “MP” command. > > * “FA”/”FB” commands and loss of PLL lock: Large FA/FB frequency steps > were, on rare occasion, causing loss of PLL lock. This has been > corrected. > > * Added "PA$" (sub RX preamp) and "RA$" (sub RX attenuator) commands. > This is in conjunction with the sub preamp and attenuator settings now > being independent of main (see above). During BSET, both return “?;” > at present. > > > --- > > http://www.elecraft.com > > > > > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > -- View this message in context: http://n2.nabble.com/K3-Firmware-Rev.-2.76%3A--No-AF-noise-burst--PRE-ATTN-independent-for-sub-RX--etc.-tp1694722p1696462.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3: the "strange problem" - pinched audio
Hi Doug, I am only using the K3 standalone. I do not use a computer to control it. 73, Dick, W0NTA DOUGLAS ZWIEBEL wrote: > > I have ONLY experienced something like this when using my logging > program to "drive" the K3. I have never seen this when the computer > is turned off and I use the K3 "all by itself." > > Here is what I did to "solve" the problem when using the > computer...with the computer / contest software running: > > Set the VFO A and VFO B settings as I like. Using the K3, toggle the > BAND switch (top left of K3) up one band and down one band (to get > back to where I started). Now go the next band (either direction) and > repeat: Set VFO A and B as you wish, then toggle up/down on band. > Now go to the third band and repeat. After doing this for every band, > things will "stay put" as I change bands using the computer to drive > the changes. > > I do not know if this is related or not to the "pinched audio" > problem, but it sounds close to what has been described. > > Are you folks using the K3 in stand-alone mode or using a computer to > change from VFO A to B, etc? > > de Doug KR2Q > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > -- View this message in context: http://n2.nabble.com/K3%3A-the-%22strange-problem%22---pinched-audio-tp1658988p1659143.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Strange problem when switching modes from VFO A to B
Jack, You are correct. I have had the reports of pinched audio and just cycle to another band and back or switch sidebands and back and everything is OK. I have duplicated what you report: VFO A on CW and VFO B on SSB. Turn off K3 while on VFO A - CW. Turn it back on and immediately switch to VFO B - SSB and the audio is terrible. Cycle to other sideband and back and all is well again. This only happens to me on 40, 80, and 160 meters. Other bands are unaffected. Each time I have had a report of bad audio, it was on 40 meters. Rarely operate 80 or 160 meters. I am glad to find out how to get around this problem. I hope something can be done with programming to fix it, though. 73, Dick, W0NTA Jack Colson wrote: > > I have VFO A programmed for CW on each band, VFO B programmed for SSB > (makes no difference which sideband ). Power up the K3 on VFO A then > switch over to VFO B and the signal generated is extremely distorted and > sounds like it is being transmitted via a very narrow filter. To > correct this problem simply switch the mode from L or USB to CW and back > again to L or USB. Audio is then restored to normal. I have the > filters programmed correctly, the 2.7KHz filter is used for transmit. I > am using the ESSB mode with a 4 KHz filter. This problem is independent > of band. > > I mentioned this to Gary who passed it onto Lyle and who was unable to > make it happen. I am using firmware 2.38 DSP 1.92. I am waiting for an > update which will fix the turn on audio spike before updating. > > Any suggestions ? It is just a nuisance getting a report of who is that > calling!!! > > 73, > Jack, W3TMZ > > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > -- View this message in context: http://n2.nabble.com/Strange-problem-when-switching-modes-from-VFO-A-to-B-tp1656359p1656737.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 sweepstakes this weekend
Hi Don, Thank you for the SSCW contact this past weekend. I believe you were the one who told me I had a chirp. (If not, I am sorry to have burdened you with this). After the report, I immediately switched from my K3 to a K2 and finished the contest. I was using N3FJP software to key the K3 as well as a paddle for keying the K3 keyer. Can you tell me how bad the chirp was? I have had two other reports like this during contests - even the QRP ARCI at 5 watts. It seems it comes on after I have used the K3 for a substantial amount of time. I contacted Elecraft support and they suggested some things to check out, but it is very difficult to do when the radio works fine most of the time. I set it up here with a loop from the logging program and let it run into a dummy load for over an hour with no change. I may have to send it back to them for their analysis. Anyway, I finished the contest with 706 Qs in 77 sections (no ND, NL, NT) for a score of 100K+. Sure is a fun contest. I really enjoy the K3, but the K2 is still a very good radio for CW contests also. I made 357 Qs with the K3 and 349 with the K2. Thanks and best regards. Dick Housden, W0NTA Greeley, CO___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [K3] [Elecraft] Help with distorted transmit audio
Mike Scott-7 wrote: > > Today using SSB on 40M my K3 came up with pinched audio, the other > operator > asked me to take the "clothes pin" off my nose. Full (and good) audio was > obtained with a power cycle. I was told that signal strength came up > significantly after the power cycle. > > Scott, > > I experienced this problem one time. Your description of "pinched" audio > is exactly what the other station told me. It was just after I installed a > new firmware upgrade, but I don't remember which one. Another new update > was available and I installed it. I have not had the problem again. I > would suggest downloading the current firmware version and try again. > > 73, Dick, W0NTA > Gree;ey, CO > > > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > -- View this message in context: http://n2.nabble.com/Help-with-distorted-transmit-audio-tp1361568p1362035.html Sent from the [K3] mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] WTB: 10-MHz Test Oscillator Wanted
Alan, take a look at this: http://kitsandparts.com/fref.php 73, Dick, W0NTA Greeley, CO Alan D. Wilcox wrote: > > Hello, > > Want 10-MHz crystal oscillator that puts out a volt or so for frequency > counter calibration check. > > Must have cap to set freq zeroed onto WWV for a few minutes operation; > no long-term stability required. > Something like the XG1 ... battery, BNC, not fancy. > > Thought this would be simple search ... a kit-builder's project. Guess > nobody's making such a kit. > > Anybody have or know where to get? > > Thanks, > Alan > > -- > Alan D. Wilcox, W3DVX > 570-321-1516 > http://WilcoxEngineering.com > Williamsport, PA 17701 > > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > > -- View this message in context: http://n2.nabble.com/WTB%3A-10-MHz-Test-Oscillator-Wanted-tp532266p532331.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Elecraft CW Net Report for July 13th & 14th, 2008
Thanks David. I knew I saw something about serial numbers somewhere. I just used the wrong search parameters when I went looking. 73, Dick, W0NTA Greeley, CO David King-11 wrote: > > On July 3rd, Eric had posted the following reference serial numbers in a > message titled "KRX-3": > > We are shipping in two parallel groups: kit and built K3s. Since -F > built K3s are built to order, and because the kit and built versions are > built on different production lines, the s/n sequences will not be > exactly in sequence between the two groups getting KRX3s. > --- > > There are a lot more KRX3's backlogged for the kit version than for the > -F built version, since the initial orders strongly favored kits. We are > working through both of these groups in parallel (with different > production people) and as a result the -F serial numbers will appear to > jump forward faster than the kit versions. > > David King > KE7EKA > -- View this message in context: http://n2.nabble.com/Elecraft-CW-Net-Report-for-July-13th---14th%2C-2008-tp528962p530040.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Elecraft CW Net Report for July 13th & 14th, 2008
Hi John, I am not sure how Elecraft is issuing serial numbers. I thought I read somewhere that there could be differences in the sequence of kits versus assembled units, but I cannot find anything on that. Maybe I was dreaming, again. Maybe someone else can enlighten us. 73, Dick, W0NTA Greeley, CO John Clare wrote: > > Hello Dick et al. On noting your K3 Serial Number, and wishing to > understand > the radio and the company much better, I am puzzled by Serial Number > chronology. My K3 rolled off the production line approx 21 days ago and > its > Serial Number is 1054, yet I am seeing numbers out there that are in the > 1100's and 1200's. My K3 is a 100w factory assembled version with auto > tuner > and transverter interface. Are there seperate serial no. blocks for 10w, > kit > form etcetera., does any one know? John Clare VK1CJ. > > -- View this message in context: http://n2.nabble.com/Elecraft-CW-Net-Report-for-July-13th---14th%2C-2008-tp528962p530022.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Elecraft CW Net Report for July 13th & 14th, 2008
Hi Kevin, Good to hear you on ECN. One change, my K3 is #1208 not 1207. It sure seems like a very nice radio. I took it to the cabin over the weekend and got in some nice QSOs. Had to come home early so we could attend my grand daughter's sixth birthday party Sunday afternoon. So. I missed the 20 meter net. I can only run about 40 to 50 watts from here on 40 meters since I knock out a couple of GFIs if I run 100 watts. Hope to remember next week's net. 73, Dick, W0NTA Greeley, CO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 1208 arrives in Colorado
K3 #1208 arrived here in Greeley, CO yesterday as expected. Ordered on February 19. Received notice from Katie on July 2. She shipped it on July 3. It is a kit K3/100 with the auto tuner, 1.0KHz filter, and 400Hz filter. All arrived in excellent condition including the mixer board. It went together very easily and is operating just fine. Hope to hear some of you on the air soon. 73, Dick, W0NTA Greeley, CO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 soon to arrive
I ordered my K3 on February 19. Received notice from Katie on July 2. She shipped it on July 3 and it should arrive on July 9 according to UPS. It is a kit K3/100 with the auto tuner, 1.0KHz filter, and 400Hz filter. Nothing backordered. I hope to have it on the air next weekend. 73, Dick, W0NTA Greeley, CO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] FS: K2 S/N 3900 with options - SOLD
My K2 has been spoken for. Thanks to all. 72, Dick, W0NTA Greeley, CO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] FS: K2 S/N 3900 with options
I have for sale my favorite K2, serial number 3900. This radio has served me extremely well during many ragchews, Fox Hunts, and contests over the past almost four years. I have built four K2s, and now it is time to try the K3. Meanwhile, I will use my other K2/100. This K2, 3900, is in excellent shape cosmetically with no marks on the cabinet. It is 100% electronically. It includes: K2 Basic K2 (#3900) KSB2 Internal sideband generator board (late board with newer crystals) KNB2 Internal noise blanker board KAF2 Internal audio filter board K160RX Internal 160 meter board KAT2 Internal auto antenna tuner Currently setup for 600 Hz sidetone and offset. CW filters set at 1000, 700, 400, and 250 Hz. using Spectrogram. Microphone jumpers are set for the Elecraft MH2 microphone. (Not included) This is a Revision B main board radio, which includes many upgrades over the pre-3000 serial number units. Firmware is: K2 MCU 2.03D K2 IOC 1.07 KSB2 1.08b Includes manuals for all modules. Includes power cable with PowerPole on power supply end. Price, including shipping to US is $825.00. I will email a PDF file with pictures on request. Please contact me at w0nta at arrl.net. 72/73, Dick, W0NTA ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] FS: K2 S/N 3900 with options
Happy New Year. I have for sale my favorite K2, serial number 3900. This radio has served me extremely well during many ragchews, Fox Hunts, and contests over the past almost four years. I have built four K2s, and now it is time to try the K3. Meanwhile, I will use my other K2/100. This K2, 3900, is in excellent shape cosmetically with no marks on the cabinet. It is 100% electronically. It includes: K2Basic K2 (#3900) KSB2Internal sideband generator board (late board with newer crystals) KNB2Internal noise blanker board KAF2Internal audio filter board K160RX Internal 160 meter board KAT2Internal auto antenna tuner Currently setup for 600 Hz sidetone and offset. CW filters set at 1000, 700, 400, and 250 Hz. using Spectrogram. Microphone jumpers are set for the Elecraft MH2 microphone. (Not included) This is a Revision B main board radio, which includes many upgrades over the pre-3000 serial number units. Firmware is: K2 MCU 2.03D K2 IOC 1.07 KSB2 1.08b Includes manuals for all modules. Includes power cable with PowerPole on power supply end. Price, including shipping to US is $825.00. I will email a PDF file with pictures on request. Please contact me at [EMAIL PROTECTED] 72/73, Dick, W0NTA ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] SOLD: Pre-wound toroids for KAT-100 antenna tuner
The toroids have been spoken for. Thanks. 72, Dick, W0NTA Greeley, CO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] FOR SALE: Pre-wound toroids for KAT-100 antenna tuner
I have for sale a set of unused pre-wound toroids for the KAT-100 antenna tuner (By Toroid Guy).$25.00 first class mailed.Please email off list to [EMAIL PROTECTED] Thanks and 72. Dick Housden, W0NTA Greeley, CO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] FOR SALE: Elecraft items
Hi All, I have for sale some Elecraft kits that are excess to my needs at this time. K1 Upgrade Kit. Upgrades older K1s (s/n 1092 and earlier) to match current K1s. $7.00 mailed. KFL1-4 Trimmer Capacitor Upgrade kit. $10.00 mailed. KAT-100 pre-wound toroids (By Toroid Guy) $27.00 mailed. Please email off list to w0nta at arrl.net. Thanks and 72. Dick Housden, W0NTA Greeley, CO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] FS: Elecraft KAT100-2 external 100W antenna tuner SOLD
Thanks to all who responded. The tuner has been sold. 72, Dick, W0NTA Greeley, CO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] FS: Elecraft KAT100-2 external 100W antenna tuner
This KAT100 tuner is in perfect condition. It has had very little use. It is built into the EC2 enclosure and includes the three inch tilt stand to match the K2. The manual is an excellent copy from the Elecraft web site and is comb bound. I spilled coffee on the original. $260.00 including shipping within the US. Images can be seen at: http://home.comcast.net/~housden/KAT100.htm 73, Dick, W0NTA Greeley, CO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE:[Elecraft] New K2 owner- question on first start up
Hi Jerry, The T that looks like an E with the top bar missing is actually a lower case t. It is OK. As for always coming up with PRE, try turning pre off and then either switching bands and returning to your initial band or change modes and return to your original mode. It will "stick" in the off position then. Nor sure why, though. 72, Dick, W0NTA Greeley, CO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
