[Elecraft] KPA100 T-R switch
Anyone have an idea of just how much power the T-R sw. in the KPA100 would handle over the 100 watts it is handling . 300 -400 watts? ThanksGilK8EAG ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Elecraft KAF2
I have for sale a KAF2. C19 has been padded with both fixed and a variable capacitor so as to set the 32.768 KHz xtal to obtain precise time. Battery still good , checks at 3.042 VDC. Asking $55.00. Will ship CONUS. Gil K8EAG If interested please contact off list. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Elecraft Hex Key
Many thanks to all that replied to my odd request for info. Thanks go to: 4dgh,4nn,1rgb,0ve,0ukk,7pm,1euy and 3zvt. And of course to any I may have missed. Thanks again GilK8EAG ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Elecraft hexkey
I have an odd request. Any one who has such a key ,could you please tell me the thickness of the base. Please reply directly. Thank youGil K8EAG ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Cure for oxidized contacts (CAIG)
An excellent product. Try music stores where they sell instruments, amps etc. I have used Caig for years and have had excellent results. Great for noisy pots , switches etc. 73Gil K8EAG On Sun, 8 Jan 2006 22:09:51 GMT [EMAIL PROTECTED] [EMAIL PROTECTED] writes: Try a product called CAIG Deoxit. Best I've used. Radio Shack sells for (it ain't cheap) about $15 for a small spray can somewhat bigger than a man's thumb. The package also contains an equally small can of stuff for gold contacts. It will rejuvenate old flashlites. I used it on the plug which connects my RV to my truck and the electris brakes seem to work better. RS also sells a Deoxit pen which would work better if you can access the worksite easily. If anyone knows of a source of larger cans please let me know. Hope this is not a dupe. Tried to send earlier. George, N4YM ___ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Elecraft high power linear
Since Elecraft is coming out with a high power linear I am wondering if they also have plans for a compatible tuner. GilK8EAG ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Elecraft MD2
Does any one know the output of the MD2 mic in dB? It drives my K2 just fine but am thinking of another mic setup. Thank youGil K8EAG ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K2 Dsp ?
I can give you some practical experience if you so choose. I live near Ovid which is not too far from Gaines. Remember the DSP is an audio device and a strong signal will push the AGC up. However I am able to copy through some very strong signals with the notch engaged. We have some great tuner uppers on 75. I sometimes think this is how some do their hamming... The notch is left on when chatting for this reason Contact me off list if you would like to play with the DSP , would need a little time to get rid of the mess.. GilK8EAG 73 On Wed, 14 Dec 2005 02:54:50 -0800 (PST) PERRY FP#582 [EMAIL PROTECTED] writes: Thinking about Adding the Dsp unit to my K2 How Well does the Notch function work on this unit How well does it notch out the tuner uppers...when working SSB nets...? Perry PERRY WA8THK FP#582 GAINES, MICHIGAN -USA http://www.usol.com/~wa8thk/WA8THK.htm ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Fw: Re: [Elecraft] Re: KAT100 Relays?
Wonder if anyone has tried the KAT100 at higher wattages. I have often thought about that possibility. Say 300 watts or so. Gil K8EAG wayne burdick wrote: We've actually tested these relays at a 3:1 SWR at 1 KW. Now you've done it :-) -- 73, Vic, K2VCO Fresno CA http://www.qsl.net/k2vco ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Fw: [Elecraft] KIO2
Hi fellows. Can't manage to communicate between computer and K2. Through control program or HyperTerminal verified that serial port is functional on the computer ( Win XP ). Can hear Q1s signal loud. Here are some voltage measurements made this morning. U1-1 14.12 shud be 14 U1-2 -1.3mv.1 U1-3 13.65 14 U1-4 -5.4mv .1 U1-5 -.017mv -8 U1-6 -2.38 .1 U1-7 13.6614 U1-8 -3.13 -9 U1-9 0 0 U1-10 00 U1-11 4.89 5 U1-12 4.985 U1-13 4.89 4.5 U1-14 0 0 U1-15 4.894.5 U1-16 4.895 Wonder if getting voltage on pin 8 would to proper level would cure the problem? J1-1 0shud be0 2 -.011-8 3 -2.36.1 46.274.5 50 0 65.62 5.5 70 0 814.12 14 98.18 8 Voltages on J2 are in limits. Any help would be greatly appreciated. Thanks Gil K8EAG ___ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Elecraft KIO2
My thanks to Don Wilhelm and Jack Brindle. Yep, it turned out to be a short that was pulling J1-2 to ground. I had a couple of .01 caps and so cut them loose ( C3 C6 ) . But still shorted. New Max1406 coming from Elecraft. After removing the IC the negative voltage on pin 8 was then a healthy -12v. Thanks again for steering me toward the problem Gil K8EAG ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] KIO2
Hi fellows. Can't manage to communicate between computer and K2. Through control program or HyperTerminal verified that serial port is functional on the computer ( Win XP ). Can hear Q1s signal loud. Here are some voltage measurements made this morning. U1-1 14.12 shud be 14 U1-2 -1.3mv.1 U1-3 13.65 14 U1-4 -5.4mv .1 U1-5 -.017mv -8 U1-6 -2.38 .1 U1-7 13.6614 U1-8 -3.13 -9 U1-9 0 0 U1-10 00 U1-11 4.89 5 U1-12 4.985 U1-13 4.89 4.5 U1-14 0 0 U1-15 4.894.5 U1-16 4.895 Wonder if getting voltage on pin 8 would to proper level would cure the problem? J1-1 0shud be0 2 -.011-8 3 -2.36.1 46.274.5 50 0 65.62 5.5 70 0 814.12 14 98.18 8 Voltages on J2 are in limits. Any help would be greatly appreciated. Thanks Gil K8EAG ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Fw: [DX-NEWS] message from K7C
Does the following have some real meaning or is it simply an illustration? Gil K8EAG K7C Bulletin - Oct 1st 3) Follow instructions. If the K7C op says 200 to 205, you probably won't get in the log at 207 or 198. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Elecraft F/S K2/100 and KAT100
I am selling my K2/100 S/N 2310. It has all the updates with the exception of the audio and cw keying. Includes KNB2,KAF2,K160M and KSB2. Also harness for KIO2 for the KAT100, XV and PC. An added feature is the K6XX SMD visible LED CW indicator. All of the above $1100.00 If a mic is wanted I can furnish one with the MH2 element installed in a cylindrical handheld for a total of $1150.00. Or a Heil HM10 mic for a total of $1200.00. Will pay shipping in Cont US. If interested please contact me off list. Can send pic's. Thank youGil K8EAG PS keeping my K2 S/N 800 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2/100 for sale
I am selling my K2/100 S/N 2310. But keeping my S/N 800 It has all updates with the exception of the audio and cw keying. Includes KNB2, KAF2, K160M, KSB2 and KAT100. Also harness for KIO2 for KAT100, XV, and PC. An added feature is the K6XX SMD visible LED CW tuning indicator. If a mic is wanted I can furnish either a mic with MH2 element installed in a cylindrical hand held body or a Heil HM10 with amp built in. If interested please contact me off list. Thank youGil K8EAG ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] QST Review of KAT100 and KDSP2 in Jan 2005 Issue
I finally got around to reading this review and believe that the last 2 paragraphs say it all. Gil K8EAG On Mon, 29 Nov 2004 20:54:26 EST [EMAIL PROTECTED] writes: Elecrafters, For those who are ARRL members, you can see the review at the Members Only web page (http://www.arrl.org/members-only/). 73, Henry - K4TMC K2 #3137 ___ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] For sale xv144 transverter
Transverter is set up for use with K2/100. Built from manual 11/7/03 rev B. Adaptor for N to UHF included. I will ship and insure Con USA. Price is $400.00 Please contact me off list. Thank you Gil K8EAG ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
