[Elecraft] CW Skimmer with KX3 Help needed
Anyone using an Elecraft KX3 with CW Skimmer with the DigiRig See offset noise on CW decodes no matter what frequency I select in CW Skimmer and hard to decode signals and is within 1kHz of desired frequency Need to figure how to set it up with a KX3 withCW Skimmer Seems the I/Q output is not that good on the KX3Maybe I am missing something here !FYI, WSJX works fine with the KX3 and DigiRigMaybe it has to do with the filters in CW but have set this to NORMAL via front panel, perhapsI/Q output is too narrow when in CW mode for the KX3 ? Also tried with ASUS XONAR U7 sound card with similar results !ThanksMikeWB6DJI Sent from the all new AOL app for iOS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] When to use the preamps on the KX2/KX3 vs. K3/K3S (Wayne Burdick)
Wayne, Have a KX3 here and use the Rx I/Q Ports with external SDR receiver and applications need I/Q outputs with an HF 3dB splitter with a DXE RTR-1A DXE box with Protection from overload Rx protection Noticed poor sensitivity due to the High NF when taking output from Rx I/Q at the Rx I/Q has great amplitude & Phase Balance ( outstanding ) Noted that to increase sensitivity in my Go Box had to add a Clifton Labs HF 11dB High IP2/High Ip3 LNA preamp to utilize the Rx I/Q Ports on super weak Signals. Found adding an External Pre-Amp was necessary and with Pre-Amp On in the KX3 for Bands on 20meters and Higher was necessary to get enough sensitivity for my necessary Rx I/Q applications and 3rd Party SDR Synced Receiver being driven by the KX3 and WIN4K3 software 73 Mike __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX3 - SDRPlay RSP2 - Win4K3 and WriteLog or possibly N1MM+ logging program can all run at same time ?
Have Writelog Version 12 used it for ARRL Field with my K3 last year This year want to use Writelog with my KX3 but only see K3 but no KX3 in it's configuration setup. Anyone have success with Writelog, may need to go to N1MM+ instead Also running KX3, SDRPlay and Win4K3 here and that works great but now need a Logging program that will allow this setup to work Seems there are CommPort issues in software where I can not use Win4K3 on my KX3 and a logging program at same time. Any suggestions, Using KXUSB cable to my netbook computer Seems 73 Mike WB6DJI ava...@verizon.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] What are the RF devices in the KPA1500 Amp?
What are the RF devices in the New 1500Watt KPA1500 Amp? Mike __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Taking KX3 on Airlines -Any issues/hassles with TSA/etc there days - with Bio-Engg 12V 7Ah Lithium Battery as Carry On Luggage
Just trying to plan the logistics for taking a KX3 with me on the Airlines Mike WB6DJi -Original Message- From: Michael Aust To: elecraft Sent: Sun, May 14, 2017 8:47 am Subject: Taking KX3 on Airlines -Any issues/hassles with TSA/etc there days - with Bio-Engg 12V 7Ah Lithium Battery as Carry On Luggage Taking KX3 on Airlines -Any issues/hassles with TSA/etc here days - with Bio-Engg 12V 7Ah Lithium Battery as Carry On Luggage USA to Hawaii USA oversea's Any recent traveler's experience with Airport screeners ? etc Mike WB6DJi __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Taking KX3 on Airlines -Any issues/hassles with TSA/etc here days - with Bio-Engg 12V 7Ah Lithium Battery as Carry On Luggage
Taking KX3 on Airlines -Any issues/hassles with TSA/etc here days - with Bio-Engg 12V 7Ah Lithium Battery as Carry On Luggage USA to Hawaii USA oversea's Any recent traveler's experience with Airport screeners ? etc Mike WB6DJi __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Can you store Date into KX3
Seems crazy to not have Date and only Time The KX3 manual on the last page, index, say's Date is on Page 30 but when you look at Page 30, it only talks about time Guess Elecraft forgot about this ,,, Mike WB6DJI -Original Message- From: Don Wilhelm To: Michael Aust ; elecraft Sent: Sun, Apr 9, 2017 4:18 am Subject: Re: [Elecraft] Can you store Date into KX3 Mike, Neither the KX3 manual nor the KXBC3 manual make any reference to a date. Only the time and an alarm. 73, Don W3FPR On 4/9/2017 1:50 AM, Michael Aust wrote: > > Can you store Date into KX3 > > > > Seems I can only store Time but not Date into KX3 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Can you store Date into KX3
Can you store Date into KX3 Seems I can only store Time but not Date into KX3 Am I missing something in the manual 73 Mike WB6DJI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Can Anyone recommended a great QRP Antenna and Antenna Pole for KX3
Tom, Will be operating QRP with KX3 & Versa-Antenna & the 27ft poles at the Lagoon at the Disney Hotel in Wakikoloa on the Big Island drinking Mai Tai's and working CW Aloha 73 Mike WB6DJI -Original Message- From: Michael Aust To: tom.parish ; elecraft Sent: Sun, Apr 2, 2017 6:14 pm Subject: Re: [Elecraft] Can Anyone recommended a great QRP Antenna and Antenna Pole for KX3 Tom, Just bought the last two 7.2mm poles, what a deal ! Will fit in my luggage fine to Hawaii with KX3 and my EndFed Antenna made for the KX series radio's like the KX3 ! http://www.ebay.com/itm/End-Fed-QRP-antenna-for-Elecraft-K-KX-series-/152485477586?hash=item2380d7bcd2:g:KB0AAOSwUKxYaspN Mike WB6DJI -Original Message- From: Tom Parish To: Michael Aust ; elecraft Sent: Sun, Apr 2, 2017 4:39 pm Subject: Re: [Elecraft] Can Anyone recommended a great QRP Antenna and Antenna Pole for KX3 Michael - Fred Maas KT5X suggested the following to me recently and it's working well. $2.99 plus shipping from China. Worth the wait. Delivered early. Comes with a small cloth case. http://www.ebay.com/itm/262678511063 These are 3.6m-7.2m Carbon Fiber Stream Pole Telescopic Spinning Freshwater Fishing Rod 25 inches - fits in a suit case just fine. Very light - 10 ounces. Expands to nearly 27 feet. I don't use the last length. I purchased two of them. I use it with my KX2 and a 35ft and 43ft end fed antenna set up. Love it. Tom On Sun, Apr 2, 2017 at 3:25 PM, Michael Aust wrote: Can Anyone recommended a great QRP Antenna for KX3 Going to Hawaii with KX3 from high rise Hotels and some Sandy Beaches that is lightweight, easy to deploy, carry on Airlines or packed into luggage. Any Portable Poles to recommend for End Fed Antenna's My MFJ-1920 pole is 3.8ft when collapsed and extends to 33 feet but when Island Hopping, 3.8ft does not qualify as a Carry On due to it's length So hit with extra baggage fee's Maybe a Fishing pole that is on sections that not as long, when collapsed would be the Answer, some 14ft to 17 feet Crappie Fishing poles only breakdown to 46inches to 48inches, about the collapsed length of my MFJ-1910 fiberglass telescopic mast Mike WB6DJI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to tom.par...@gmail.com -- Inspire Curiosity Together BILDR - no code programming platform 512-782-4814 | TomParish.com KB5RF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Can Anyone recommended a great QRP Antenna and Antenna Pole for KX3
Tom, Just bought the last two 7.2mm poles, what a deal ! Will fit in my luggage fine to Hawaii with KX3 and my EndFed Antenna made for the KX series radio's like the KX3 ! http://www.ebay.com/itm/End-Fed-QRP-antenna-for-Elecraft-K-KX-series-/152485477586?hash=item2380d7bcd2:g:KB0AAOSwUKxYaspN Mike WB6DJI -Original Message- From: Tom Parish To: Michael Aust ; elecraft Sent: Sun, Apr 2, 2017 4:39 pm Subject: Re: [Elecraft] Can Anyone recommended a great QRP Antenna and Antenna Pole for KX3 Michael - Fred Maas KT5X suggested the following to me recently and it's working well. $2.99 plus shipping from China. Worth the wait. Delivered early. Comes with a small cloth case. http://www.ebay.com/itm/262678511063 These are 3.6m-7.2m Carbon Fiber Stream Pole Telescopic Spinning Freshwater Fishing Rod 25 inches - fits in a suit case just fine. Very light - 10 ounces. Expands to nearly 27 feet. I don't use the last length. I purchased two of them. I use it with my KX2 and a 35ft and 43ft end fed antenna set up. Love it. Tom On Sun, Apr 2, 2017 at 3:25 PM, Michael Aust wrote: Can Anyone recommended a great QRP Antenna for KX3 Going to Hawaii with KX3 from high rise Hotels and some Sandy Beaches that is lightweight, easy to deploy, carry on Airlines or packed into luggage. Any Portable Poles to recommend for End Fed Antenna's My MFJ-1920 pole is 3.8ft when collapsed and extends to 33 feet but when Island Hopping, 3.8ft does not qualify as a Carry On due to it's length So hit with extra baggage fee's Maybe a Fishing pole that is on sections that not as long, when collapsed would be the Answer, some 14ft to 17 feet Crappie Fishing poles only breakdown to 46inches to 48inches, about the collapsed length of my MFJ-1910 fiberglass telescopic mast Mike WB6DJI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to tom.par...@gmail.com -- Inspire Curiosity Together BILDR - no code programming platform 512-782-4814 | TomParish.com KB5RF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Can Anyone recommended a great QRP Antenna and Antenna Pole for KX3
Did you have to put metal ferrels to join the pieces Anyway you can send me a picture of it. Mike WB6DJI -Original Message- From: Scott McDonald To: Michael Aust Cc: elecraft Sent: Sun, Apr 2, 2017 1:54 pm Subject: Re: [Elecraft] Can Anyone recommended a great QRP Antenna and Antenna Pole for KX3 Hey Mike. For a trip to ZF last month, I took several old Walmart crappie pole pieces and built a 22 foot mast by judiciously selecting and cutting pieces no longer than 28 inches so that the sections would stack and the disassembled antenna would fit diagonally in my suitcase. I'm hoping that has forever solved the air transport of fiberglass mast problem. Its not as bulky as it might seem because the narrower pieces stow easily inside the wider ones. And Walmart crappie poles aren't exactly heavy duty. I did find that unless you are good with puzzles, it is a really good idea to number the sections in order of assembly. Don't ask.. As far as high rises go, if you can get a wire 6 feet out and drop it vertically it can be an amazing low band antenna - you need a weight on the bottom that can't hurt anyone, like a hotel size plastic shampoo bottle or a small bean bag like the tree maintenance guys use, and if you land the weight on the ground somewhere out of the way, rather than letting it swing or be near a pedestrian pathway, you are much better off. In that case some monofilament for the last ten feet or so keeps the rf away from whatever is there on the ground. My kx3 rarely has any trouble tuning that set up if you throw a counterpoise wire around the balcony or can ground to a railing. Have fun. Scott ka9p Sent from my iPad > On Apr 2, 2017, at 3:25 PM, Michael Aust wrote: > > Can Anyone recommended a great QRP Antenna for KX3 > > > Going to Hawaii with KX3 from high rise Hotels and some Sandy Beaches > that is lightweight, easy to deploy, carry on Airlines or packed into luggage. > > > Any Portable Poles to recommend for End Fed Antenna's > > > My MFJ-1920 pole is 3.8ft when collapsed and extends to 33 feet > but when Island Hopping, 3.8ft does not qualify as a Carry On due to it's > length > So hit with extra baggage fee's > > > Maybe a Fishing pole that is on sections that not as long, when collapsed > would be the Answer, some 14ft to 17 feet Crappie Fishing poles only > breakdown to 46inches to 48inches, about the collapsed length of my > MFJ-1910 fiberglass telescopic mast > > > Mike > > WB6DJI > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to k...@aol.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Can Anyone recommended a great QRP Antenna and Antenna Pole for KX3
Can Anyone recommended a great QRP Antenna for KX3 Going to Hawaii with KX3 from high rise Hotels and some Sandy Beaches that is lightweight, easy to deploy, carry on Airlines or packed into luggage. Any Portable Poles to recommend for End Fed Antenna's My MFJ-1920 pole is 3.8ft when collapsed and extends to 33 feet but when Island Hopping, 3.8ft does not qualify as a Carry On due to it's length So hit with extra baggage fee's Maybe a Fishing pole that is on sections that not as long, when collapsed would be the Answer, some 14ft to 17 feet Crappie Fishing poles only breakdown to 46inches to 48inches, about the collapsed length of my MFJ-1910 fiberglass telescopic mast Mike WB6DJI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Skimmer and the K3S
Wish the K3S and Skimmer did this ! https://www.youtube.com/watch?time_continue=106&v=jjZ-l6v7gEI 73 Mike WB6DJI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Sherwood's receiver performance table updated
Interesting Sherwood Receiver Ratings http://www.sherweng.com/table.html Used the following radios at our DX Club station ( 1st place is K3/P3 by our DX operators ) 1st Place --> K3/P3 (upgraded synth) Best NB, Sensitivity and Filtering 2nd Place --> IC-7851 IC-7300 TS-990S ( Sold it - Terrible NB ) TS-590S ( Sold it as well ) Most preferred Radio for performance is the K3/P3 (with upgraded Synth) Eric/Wayne you got a great product ! 73 Mike __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Recording CQ WW CW and SSB
New ICOM IC-7851 can do this, for TX and RX record this all on a single SD card on IC-7851 for the whole CQWW DX contest for you. 73 Mike __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Anyone try the BHI DSP Speaker on the K3
Here a Demo Video with the BHI DSP Noise Reduction Unit on a Elecraft KX3 ! 73 Mike NES10 2 MK3 NOISE KILLER SPEAKER | | | | | | | | | | | NES10 2 MK3 NOISE KILLER SPEAKER | | | | View on www.youtube.com | Preview by Yahoo | | | | | On Saturday, October 10, 2015 1:36 PM, Michael Aust wrote: Maybe Elecraft could offer the BHI DSP inside the New K3 Speaker as an option ! 73 Mike On Saturday, October 10, 2015 1:06 PM, Michael Aust wrote: Wondering if anyone has tried the BHI DSP Speaker on the K3. Seen many YouTube Video's the BHI DSP Speaker and heard the files on theirWebsite, Seems the BHI DSP Noise Reductiondoes not have a lot of the hollow sounding digital artifacts, especially for SSB. The K3 DSP Noise Reduction is ok, but I sayit not the greatest, but I will say the Noise Blankeris super on the K3 ! 73 Mike __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Anyone try the BHI DSP Speaker on the K3
Maybe Elecraft could offer the BHI DSP inside the New K3 Speaker as an option ! 73 Mike On Saturday, October 10, 2015 1:06 PM, Michael Aust wrote: Wondering if anyone has tried the BHI DSP Speaker on the K3. Seen many YouTube Video's the BHI DSP Speaker and heard the files on theirWebsite, Seems the BHI DSP Noise Reductiondoes not have a lot of the hollow sounding digital artifacts, especially for SSB. The K3 DSP Noise Reduction is ok, but I sayit not the greatest, but I will say the Noise Blankeris super on the K3 ! 73 Mike __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Anyone try the BHI DSP Speaker on the K3
Wondering if anyone has tried the BHI DSP Speaker on the K3. Seen many YouTube Video's the BHI DSP Speaker and heard the files on theirWebsite, Seems the BHI DSP Noise Reductiondoes not have a lot of the hollow sounding digital artifacts, especially for SSB. The K3 DSP Noise Reduction is ok, but I sayit not the greatest, but I will say the Noise Blankeris super on the K3 ! 73 Mike __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] IC-7300
Phil, Wayne and others My Best SDR radio with super Blocking range, Sensitivity is a K3 with the KSYN3A board and new PreAmp/XV Interface boardmodule board from Elecraft Added an Asus I/Q external sound card box, netbook computer, PowerSDR and a Larry Phillip's LPPAN-2 and beats everything out there ! As I change button on the K3, the Power SDR software followsor vice versa. Really performs well, the Up front filtering in the K3 withe the super Low Noise LOPhase Noise with the upgraded K3 ( or new K3S ) makes the best of both worlds,conventional and SDR world's ( A hybrid so to say ) . The LP-PAN2, since done at IF is protected that strong signals. Make some of my $expensive Big Box radio's look bad ! Just my $0.02 two cents opinion about all of this hype on the IC-7300, it not goingto be anywhere near a hybrid in performance. You can not beat the K3/KSYN3A or K3Sfor performance. A high performance back end I.F. SDR with your K3 or K3S is the way to go ! 73 MikeWB6DJI >Thanks for the explanation, Wayne. Funny thing is >that I never think of the K3 as *functionally* an >SDR radio, I guess because I don't have access to >the I/Q signal -- unless it accessible in some >sneaky way I don't know about. OTOH in principle >it seems one could take the I/Q output of the KX3 >and build their own "back end", playing all sorts >of games -- not that I plan such an adventure. >However, last Summer I did build one of the Tiny >Python Panadapters in the April 2014 QST which was >a fun project made possible by the KX3's I/Q port, >though I soon replaced it by the much more capable >PX3. >Aside from its "cosmetic" features, which don't >particularly appeal to me, the Icom-7300 looks >like a radio not well suited for operation in >crowded bands, DX pile-up situations, a >strong-signal environment or Field Day. It will be >interesting to see what the QST and Sherwood tests >reveal. >There are some SDR dongles which will provide a >"look at multiple MHz of bandwidth" at very low >cost :-) Such a capability can be useful in >monitoring a band you're not currently operating. >73, Phil W7OX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] USPS shipping rates for non USA
I sold a Remote Rig's RRC-1258MKII pair to a Canada Ham andgot stiffed for the postage on my end, way too expensive, anyway gave up on sending or selling anything to Canada Hams anymorevia USPS 73 Mike Date: Thu, 11 Jun 2015 13:28:30 -0400 From: Michael Babineau To: elecraft@mailman.qth.net Subject: [Elecraft] USPS shipping rates for non USA Message-ID: <1f3f2c76-7cdc-4a69-96dd-9dbf52de4...@magma.ca> Content-Type: text/plain; charset=windows-1252 When did the International USPS shipping rates go out the roof ??? I just ordered a noise blanker for my K2 (~$USD60 ) and the cheapest shipping to Canada via USPS came up as $USD38 ! Yikes ? that almost doubles the cost ! I don?t remember the rates being this bad the last time I ordered an add-on to my K2 .. did something change recently with US Post ? Michael VE3WMB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Line-Out help needed
My Line-Out level on my K3 was too low, was Set to level of 010 had to increase higher to make things work to level > 022 Thanks. 73 Mike On Sun, 6/7/15, Ed Muns wrote: Subject: Re: [Elecraft] K3 Line-Out help needed To: "Michael Aust" Cc: elecraft@mailman.qth.net Date: Sunday, June 7, 2015, 6:39 AM What level is LIN OUT set to in the CONFIG menu?73,Ed W0YKOn Jun 6, 2015 10:33 PM, Michael Aust wrote: Have an Elecraft K3 here.When I try to get Audio from the Line-Out for CW, to feed into a computer, I get no Audio Out, tried Mono and Stereo Outputson my K3. Do I need to turn something on in the K3 Menu ?? If I plug into front Headphone Jack on K3, it works. I need a independent Audio Line-Out that is nottied to the front panel volume control. Thanks in advance. SN# >8000 Firmware 5.14 Mike __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to e...@w0yk.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Line-Out help needed
Got it to work, my Line-Out needed to increase to 022 instead of 010 to make it workThanks Mike On Saturday, June 6, 2015 11:12 PM, "wb6r...@mac.com" wrote: Check the setting of LIN OUT in the config menu. Try NOR 010. GL - Steve WB6RSE On Jun 6, 2015, at 10:33 PM, Michael Aust wrote: Have an Elecraft K3 here.When I try to get Audio from the Line-Out for CW, to feed into a computer, I get no Audio Out, tried Mono and Stereo Outputson my K3. Do I need to turn something on in the K3 Menu ?? If I plug into front Headphone Jack on K3, it works. I need a independent Audio Line-Out that is nottied to the front panel volume control. Thanks in advance. SN# >8000 Firmware 5.14 Mike __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 Line-Out help needed
Have an Elecraft K3 here.When I try to get Audio from the Line-Out for CW, to feed into a computer, I get no Audio Out, tried Mono and Stereo Outputson my K3. Do I need to turn something on in the K3 Menu ?? If I plug into front Headphone Jack on K3, it works. I need a independent Audio Line-Out that is nottied to the front panel volume control. Thanks in advance. SN# >8000 Firmware 5.14 Mike __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com