[Elecraft] FS: KNB1 kit

[Paul Kemp]

Is anyone looking for the KNB1 noise blanker for the K1? I acquired an extra 
one from an estate sale. The kit is unbuilt and looking for a home.

Contact me if you are interested.

73 de Paul WB0CJB



Sent from my Galaxy

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K2 sn 179 drop outs

[Paul Kemp]

I used my K2, s/n 179, at FD with great success with one problem. During tuning 
on 40 and 20M the encoder would temporarily "drop out", causing the received 
signals to cut out.

I bought the radio at an estate sale last September with the intent to use it 
for FD. It was a Rev A so I put in the Rev B upgrades for whatever options were 
installed (not much if any). I also added the noise blanker. I had noticed the 
drop out when I used the radio on occasion but assumed it was due to lack of 
use.

Elecraft doesn't show an upgraded encoder assembly on their website. Is there 
one for such an old radio? I have an email in to the tech support there, as 
well as researching the reflector.

Paul WB0CJB


Sent from my Galaxy

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Elecraft P/N 620021 source

[Paul Kemp]

I am looking for a source (besides Elecraft) of the E620021 connector and pins 
that is used in the K1. It is the 2 pin female connector that plugs into the 
speaker connector on the RF board.

Does anyone have a source (Digikey, Mouser, Allied, Newark, etc.) and the 
correct part numbers for both the connector housing and the connector pins? I'd 
like to have a spare connector and several pins in the event I break a wire or 
want to add a Cumbria Designs X-lock board to my K1.

Paul WB0CJB

Sent from Outlook
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com