Thanks to everyone for the help and info.
It help me a lot to get things done the whe i wanted.
73s
Peter/pd1rp
Op vr 31 aug. 2018 om 05:31 schreef Bob Wilson, N6TV
> Yes the S-BOX is designed to key FSK and PTT on a K3 ACC port, providing
> the traditional NPN keying circuit, with no Y-BOX required (though it may
> be convenient to have as well, depending on what else you need to connect
> to the K3 ACC port). Straight 9-pin and 15-pin D-SUB cables handle
> everything, no need to use the S-BOX RCA connectors if you have a K3 or
> K3S. There are four independent keying circuits inside the S-BOX, so you
> can key FSK on two radios with the one box, or CW/PTT on one and FSK/PTT on
> the other, if you like.
>
> See these links for a sample connection diagram and schematics:
>
> https://www.kkn.net/~n6tv/S-BOX/Features.html#RemoteHams
>
> https://www.kkn.net/~n6tv/S-BOX/Features.html#SO2RRTTY
>
> Many other configurations are possible.
>
> If you use a USB-to-Serial device by Edgeport, MMTTY can open open the
> serial port directly at 45.5 baud Baudot. If you use one based on FTDI,
> such as the one built-in to the S-BOX-USB, you need to use EXTFSK or
> EXTFSK64 with MMTTY since MMTTY standalone cannot open these directly at
> 45.5 baud.
>
> The K3 produces very clean FSK. AFSK can also work but there is more
> potential for RFI problems and getting the audio levels set just right.
>
> 73,
> Bob, N6TV
> https://bit.ly/S-BOX
>
> On Thu, Aug 30, 2018 at 6:53 PM, Peter W2IRT wrote:
>
> > I went a similar route with a MicroKeyer MK-II. Does the job very well,
> > but it
> > makes disconnecting and re-connecting the radio a cast iron bear of a
> job.
> > I
> > really want to replace the MK-II with another (simpler) solution for FSK,
> > CW
> > keying, SSB voice file sequencing and CAT control, and was thinking the
> > combination of a Y-box and an S-box-USB would do the job. The problem
> > being the
> > MK-II is RFI-susceptible, and the software has eaten itself on several
> > occasions
> > over the past few years.
> >
> > - pjd
> >
> >
> > -Original Message-
> > From: elecraft-boun...@mailman.qth.net [mailto:elecraft-bounces@
> > mailman.qth.net]
> > On Behalf Of AB4IQ
> > Sent: Thursday, August 30, 2018 9:04 PM
> > To: 'Nr4c'; 'Richard Ferch'
> > Cc: elecraft@mailman.qth.net
> > Subject: Re: [Elecraft] K3S fsk with usb
> >
> > I have a RigExpert TI-8 and Cable for the K3S that I bought new that does
> > FSK with a built in Winkeyer as well. I thought I would use it on the
> K3S
> > but instead I just went the USB route and do AFSK. It's still setting in
> > the box looking lonely. I also have cables for the Ten Tec Orion II, and
> > Kenwood 590SG which I have parted with recently and probably need to get
> > rid
> > of this much needed (Ya Right) stuff. Hi..
> >
> > The USB route was the simplest and does all of the sound card modes.
> >
> > Ed.. AB4IQ
> >
> >
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to n...@arrl.net
> >
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to qwert...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
