[Elecraft] Internal keyer decode on on svga monitor
Hi I was wondering how to display the k3 internal keyer transmission on the P3 svga display monitor. I can see the receive text of the k3 on the svga monitor but not when I use the k3 internal keyer. I can also see the sent text using the keyboard hooked up to the p3 thanks richard __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Internal keyer
Hi all, Just set up the internal keyer memories and they work accordingly, except they don't key the transmitter. Probably a simple solution that I've overlooked in the manual. Cheers, Paul -- Paul Ormandy, ZL4PW, Oamaru, New Zealand http://www.zl4pw.orconhosting.net.nz/ www.radiodx.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Internal keyer
Paul, Did you turn VOX on? CW on the K3 requires VOX to transmit. Hope this helps. 73, --Ian Ian Kahn, KM4IK Roswell, GA EM74ua km4ik@gmail.com K3 #281, P3 #688 HRD v5.x/6.0 Test Team On 5/10/2012 11:14 PM, Paul Ormandy ZL4PW wrote: Hi all, Just set up the internal keyer memories and they work accordingly, except they don't key the transmitter. Probably a simple solution that I've overlooked in the manual. Cheers, Paul __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Internal keyer
On Thu, 2004-25-11 at 22:32 -0500, Earl Ritchie wrote: My problem is that when either paddle is pressed, I get only a steady tone--no dits or dahs. Speed setting doesn't change anything, just a steady tone. Are you sure you don't have a short between the dot and dash lines somewhere? The K2 has a feature that allows both a paddle and a key to be connected in parallel. The key is connected to both the dot and dash lines. When the K2 sees both dot and dash lines go low at the same time, it knows that it is the key, not the paddle (you would need a couple diodes to keep the paddle from grounding both lines). You can check this by turning off this feature. Go back to the INP menu (and hold the EDIT button to edit the parameter), the tap DISPLAY. You should see ADET OFF displayed briefly. Now try your paddle. If you have a short, you should now get alternating dits and dahs regardless of which lever you press. -- 73, Brian VE7NGR ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Internal keyer
I have connected my bencher paddles using the stereo plug and the menu set to PDLn. I have checked U6 on the control board and pins 29 30 show the correct resistance and voltage. My problem is that when either paddle is pressed, I get only a steady tone--no dits or dahs. Speed setting doesn't change anything, just a steady tone. Has anyone else had this experience and/ can offer some help? Tnx, Earl ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Internal keyer
Earl Ritchie wrote: I have connected my bencher paddles using the stereo plug and the menu set to PDLn. I have checked U6 on the control board and pins 29 30 show the correct resistance and voltage. My problem is that when either paddle is pressed, I get only a steady tone--no dits or dahs. If the dit and dah wires from the paddle are shorted (in the plug, for example) and you have the autodetect feature turned on, you would get this. -- 73, Vic, K2VCO Fresno CA http://www.qsl.net/k2vco ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
