Doug,
Well, stuff like that happens to all of us at one time or another. When
it happens to me, I just jot down a Dear Dummy note to myself and go
on with life. Glad to hear you found it.
73,
Don W3FPR
Doug Heacock wrote:
Boy, is my face red. For the benefit of those who helped with suggestions
concerning my SSB issue (power output pegging and out of control on PTT), I
must confess that when I began looking at this again (for the first time in
several years), I had completely forgotten that when I removed the SSB
adapter years ago, I put the two jumper wires and the C167 capacitor back
(as the instructions say to do). But because I tacked them to the *bottom*
of the RF board, I didn't see them until last night, when I decided to
remove the bottom cover of the K2 case to nose around a bit on the RF board.
I've removed the jumpers and the cap, and the out-of-control power output
problem is gone. I still don't know whether my SSB adapter is working
properly, because I don't actually have a real mic wired up yet (I've just
been using the dot key line as PTT)--I'll get a little electret element
wired up soon and give it a shot.
Thanks again to those who offered suggestions--even though I was barking up
the wrong tree because of my own oversight, I learned a lot along the way!
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
