Re: [Elecraft] K2 latching relays and filter alignment
This relay is shown as a direct replacement on the Digikey website. Panasonic TQ2-L-5V. https://www.digikey.com/product-detail/en/omron-electronics-inc-emc-div/G6HU-2-DC5/Z3031-ND/369201 One may have better success in finding the Panasonic part in Eu. Elecraft service may be able to verify the part as a good replacement. 73 de Ben W4SC Sent from Mail for Windows 10 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K2 latching relays and filter alignment
Albin,
The relay manufacturer has changed since Omron stopped making them. The
new relays are made by another manufacturer (Kettering if I recall
correctly). Contact Elecraft to find ordering details on the new
relays, or order from Elecraft.
Since the "filter alignmment" consists of setting the filter width and
then adjusting the BFO to place it properly with respect to the filter
center, rather then actual alignment of the filter itself, the best
tools are an audio spectrum analyzer to observe the audio and a wideband
noise generator to inject RF into the antenna jack.
The audio spectrum analyzer may be a soundcard program such as
Specctrogram or SpectrumLab running on the computer. Take the audio
output either from the headphone jack or the External Speaker jack.
If a wideband noise source is not available, you can use 'dead band'
noise from an antenna - make certain there are no actual signals.
A spectrum analyzer and tracking generator will not work well unless you
can set the analyzer for audio wile the tracking generator is at RF.
73,
Don W3FPR
On 8/24/2020 11:35 AM, Albin Stigö wrote:
Hi,
I'm in the process of repairing a K2 I've inherited from Clemed SM6DRH
who sadly passed away earlier this year at age 90.
It didn't receive/transmit on 40m and I've identified the problem to
be a defect ("stuck in the middle") relay K12 (bandpass select relay).
The relay in question is an Omron G6HU-2 5VDC. These are kind of hard
to find these days so I was wondering if anyone knows where I can find
them (preferably in the EU) or a suitable replacement?
While I'm at it I was thinking about re-aligning all the filters using
a spectrum analyzer with a tracking generator. I'm wondering if anyone
has developed a procedure for this, ie where it's good to inject the
TG signal and where it's good to measure.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
Re: [Elecraft] K2 latching relays and filter alignment
Albin,
Elecraft does have these relays. I had to replace one in my K2, and I
ordered via the website.
Neil, KN3ILZ
On 8/24/2020 10:35 AM, Albin Stigö wrote:
Hi,
I'm in the process of repairing a K2 I've inherited from Clemed SM6DRH
who sadly passed away earlier this year at age 90.
It didn't receive/transmit on 40m and I've identified the problem to
be a defect ("stuck in the middle") relay K12 (bandpass select relay).
The relay in question is an Omron G6HU-2 5VDC. These are kind of hard
to find these days so I was wondering if anyone knows where I can find
them (preferably in the EU) or a suitable replacement?
While I'm at it I was thinking about re-aligning all the filters using
a spectrum analyzer with a tracking generator. I'm wondering if anyone
has developed a procedure for this, ie where it's good to inject the
TG signal and where it's good to measure.
Sincerely,
Albin SM6WJM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
[Elecraft] K2 latching relays and filter alignment
Hi,
I'm in the process of repairing a K2 I've inherited from Clemed SM6DRH
who sadly passed away earlier this year at age 90.
It didn't receive/transmit on 40m and I've identified the problem to
be a defect ("stuck in the middle") relay K12 (bandpass select relay).
The relay in question is an Omron G6HU-2 5VDC. These are kind of hard
to find these days so I was wondering if anyone knows where I can find
them (preferably in the EU) or a suitable replacement?
While I'm at it I was thinking about re-aligning all the filters using
a spectrum analyzer with a tracking generator. I'm wondering if anyone
has developed a procedure for this, ie where it's good to inject the
TG signal and where it's good to measure.
Sincerely,
Albin SM6WJM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
