Re: [Elecraft] K3-TX "stutters" on power up

[Matt Zilmer]

You can also put the USB key / ptt into Safe Mode.  See the instructions 
in MCU 5.33 release notes (or any release notes later than this rev).


73,

matt W6NIA


On 11/28/2016 3:29 PM, Fred Jensen wrote:

Hmmm ... my original message was on 31 Oct -- Long Delay Echo?

Problem was the PTT-KEY setting -- PTT was set to DSR and it gets 
asserted intermittently as the radio and computer USB port argue when 
the radio comes on.  Apparently the radio eventually wins because it 
stops.  OFF-OFF suppresses the argument.


73,

Fred K6DGW
Sparks NV USA
Washoe County DM09dn

On 11/28/2016 12:59 PM, Gerry Hull wrote:

Fred,

I never see that on remote.  Only if I'm using N1MM for DTR CW keying
and booting a PC.

I exclusively use the USB cable for Radio Control and Winkey CW
Keying/RTTY.  No issues with that.

73, Gerry W1VE


Gerry Hull, W1VE   | Hancock, NH USA | +1-603-499-7373
AKA: VE1RM | VY2CDX | VO1CDX | 6Y6C | 8P9RM

 
 


On Mon, Oct 31, 2016 at 12:15 AM, Fred Jensen mailto:k6...@foothill.net>> wrote:

This may not be new, I often pay no attention to the radio if I
power it up, but recently I've noticed that it's going into TX
multiple times as the start-up display scrolls by on VFO B. I don't
think it's making any RF.

FWIW:  I do operate W7RN remote using RemoteRig which immediately
puts the K3 into TERM mode.  This problem I've noticed happens when
I'm operating from home, 100W, almost always on CW.

I don't see any harm to it, it's just new, and I'm wondering.  FW is
5.38  Any info appreciated.

73,

Fred K6DGW
- Sparks NV DM09dn


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to mzil...@roadrunner.com


--
Matt Zilmer, W6NIA
www.elecraft.com
Office: 831-763-4211 x125
Mobile: 909-730-6552
[Shiraz]

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3-TX "stutters" on power up

[Fred Jensen]

Hmmm ... my original message was on 31 Oct -- Long Delay Echo?

Problem was the PTT-KEY setting -- PTT was set to DSR and it gets 
asserted intermittently as the radio and computer USB port argue when 
the radio comes on.  Apparently the radio eventually wins because it 
stops.  OFF-OFF suppresses the argument.


73,

Fred K6DGW
Sparks NV USA
Washoe County DM09dn

On 11/28/2016 12:59 PM, Gerry Hull wrote:

Fred,

I never see that on remote.  Only if I'm using N1MM for DTR CW keying
and booting a PC.

I exclusively use the USB cable for Radio Control and Winkey CW
Keying/RTTY.  No issues with that.

73, Gerry W1VE


Gerry Hull, W1VE   | Hancock, NH USA | +1-603-499-7373
AKA: VE1RM | VY2CDX | VO1CDX | 6Y6C | 8P9RM

  


On Mon, Oct 31, 2016 at 12:15 AM, Fred Jensen mailto:k6...@foothill.net>> wrote:

This may not be new, I often pay no attention to the radio if I
power it up, but recently I've noticed that it's going into TX
multiple times as the start-up display scrolls by on VFO B.  I don't
think it's making any RF.

FWIW:  I do operate W7RN remote using RemoteRig which immediately
puts the K3 into TERM mode.  This problem I've noticed happens when
I'm operating from home, 100W, almost always on CW.

I don't see any harm to it, it's just new, and I'm wondering.  FW is
5.38  Any info appreciated.

73,

Fred K6DGW
- Sparks NV DM09dn


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3-TX "stutters" on power up

[Gerry Hull]

Fred,

I never see that on remote.  Only if I'm using N1MM for DTR CW keying and
booting a PC.

I exclusively use the USB cable for Radio Control and Winkey CW
Keying/RTTY.  No issues with that.

73, Gerry W1VE


Gerry Hull, W1VE   | Hancock, NH USA | +1-603-499-7373
AKA: VE1RM | VY2CDX | VO1CDX | 6Y6C | 8P9RM
 

 

On Mon, Oct 31, 2016 at 12:15 AM, Fred Jensen  wrote:

> This may not be new, I often pay no attention to the radio if I power it
> up, but recently I've noticed that it's going into TX multiple times as the
> start-up display scrolls by on VFO B.  I don't think it's making any RF.
>
> FWIW:  I do operate W7RN remote using RemoteRig which immediately puts the
> K3 into TERM mode.  This problem I've noticed happens when I'm operating
> from home, 100W, almost always on CW.
>
> I don't see any harm to it, it's just new, and I'm wondering.  FW is 5.38
> Any info appreciated.
>
> 73,
>
> Fred K6DGW
> - Sparks NV DM09dn
>
> - Northern California Contest Club
> - CU in the Cal QSO Party 7-8 Oct 2017
> - www.cqp.org
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ge...@w1ve.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3-TX "stutters" on power up

[Arie Kleingeld PA3A]

Fred,

The cause might be the initialisation of the com port connected to the 
K3 (PTT and KEY on pins of RTS and DTR, = pins 4 and 7).


73
Arie PA3A

Op 31-10-2016 om 5:15 schreef Fred Jensen:
This may not be new, I often pay no attention to the radio if I power 
it up, but recently I've noticed that it's going into TX multiple 
times as the start-up display scrolls by on VFO B.  I don't think it's 
making any RF.


FWIW:  I do operate W7RN remote using RemoteRig which immediately puts 
the K3 into TERM mode.  This problem I've noticed happens when I'm 
operating from home, 100W, almost always on CW.


I don't see any harm to it, it's just new, and I'm wondering.  FW is 
5.38  Any info appreciated.


73,

Fred K6DGW
- Sparks NV DM09dn

- Northern California Contest Club
- CU in the Cal QSO Party 7-8 Oct 2017
- www.cqp.org
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to p...@xs4all.nl



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3-TX "stutters" on power up

[Fred Jensen]

This may not be new, I often pay no attention to the radio if I power it 
up, but recently I've noticed that it's going into TX multiple times as 
the start-up display scrolls by on VFO B.  I don't think it's making any RF.


FWIW:  I do operate W7RN remote using RemoteRig which immediately puts 
the K3 into TERM mode.  This problem I've noticed happens when I'm 
operating from home, 100W, almost always on CW.


I don't see any harm to it, it's just new, and I'm wondering.  FW is 
5.38  Any info appreciated.


73,

Fred K6DGW
- Sparks NV DM09dn

- Northern California Contest Club
- CU in the Cal QSO Party 7-8 Oct 2017
- www.cqp.org
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com