[Elecraft] K3 Beta Firmware 4.81 Release Notes
The 4.81 firmware release notes as downloaded from the FTP site show only the following for version 4.81: * XVTR IF BAND CAN NOW BE 10 OR 18 MHZ (in addition to the original selections). Expansion of the release notes at least to list the steps to set the CW XFIL LO would be appreciated. 73, Paul W8TM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 Beta Firmware 4.81 Release Notes, Retracted
Oops, I now see that the necessary information is listed in the release notes, but under an earlier beta that I seem not to have. Sorry. 73, Paul W8TM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Beta Firmware 4.81 Release Notes, Retracted
Paul, The release notes are cumulative. If it was included in an earlier firmware (whether beta or production), then it is also included in the higher numbered version - unless it is specifically retracted. The only exception would be a beta version that does not reach production status (and that is rare). 73, Don W3FPR On 2/4/2014 10:34 AM, Paul Kirley wrote: Oops, I now see that the necessary information is listed in the release notes, but under an earlier beta that I seem not to have. Sorry. 73, Paul W8TM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Beta Firmware 4.81 Release Notes
That's strange, I updated mine this pm and I had all the required info! Ken.. G0ORH Sent from my iPad On 4 Feb 2014, at 15:30, Paul Kirley pkir...@fuse.net wrote: The 4.81 firmware release notes as downloaded from the FTP site show only the following for version 4.81: * XVTR IF BAND CAN NOW BE 10 OR 18 MHZ (in addition to the original selections). Expansion of the release notes at least to list the steps to set the CW XFIL LO would be appreciated. 73, Paul W8TM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 Beta Firmware 4.81 Release
Anyone have any problems with the new Firmware. I installed the firmware updates on the K3, KPA500, and KAT500 tuner. I had problems with the K3 after the update. There was some kind of problem with the power output. For starters I could not adjust the power out while the rig was keyed. For instance I tried to adjust the power on my KPA500 from 250 watts to 500 and could not adjust it while keying it. If I unkeyed I could raise the power a bit on the K3, then key back up to see what the AMP output was, then unkey to adjust again, then key to check again. I installed the older version of firmware back on the K3 and all was well again. -- 73 Steve AI9T http://www.ai9t.com AI9T DX Cluster Version 4 AI9T Telnet: dxc.ai9t.com port 7300 Version 6 AI9T-2 Telnet: dxc.ai9t.com port 7373 (CW + Skimmer) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Beta Firmware 4.81 Release
I could not reproduce this problem. I have the latest firmware (including beta releases) on all of my K-Line (K3, P3, KPA500, and KAT500). 73, Tony K4QE On Tue, Feb 4, 2014 at 10:39 PM, Steve AI9T st...@ai9t.com wrote: Anyone have any problems with the new Firmware. I installed the firmware updates on the K3, KPA500, and KAT500 tuner. I had problems with the K3 after the update. There was some kind of problem with the power output. For starters I could not adjust the power out while the rig was keyed. For instance I tried to adjust the power on my KPA500 from 250 watts to 500 and could not adjust it while keying it. If I unkeyed I could raise the power a bit on the K3, then key back up to see what the AMP output was, then unkey to adjust again, then key to check again. I installed the older version of firmware back on the K3 and all was well again. -- 73 Steve AI9T http://www.ai9t.com AI9T DX Cluster Version 4 AI9T Telnet: dxc.ai9t.com port 7300 Version 6 AI9T-2 Telnet: dxc.ai9t.com port 7373 (CW + Skimmer) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
