[Elecraft] K3 Data-A PSK31
What are the benefits of using Data-A mode for psk31 as opposed to standard USB. The manual p29, mentions that DATA mode offers several benefits not available in SSB modes however other than automatically setting CMP to 0, I can't see much else happening. Does Data-A route the signal differently to standard SSB for instance. What am I missing? Rig: K3 Interface: Microham DigiKeyer Software: HRD/DM780 73 to all Trevor G0KTN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Data-A PSK31
G4ILO wrote: You can select the back sockets for the audio input for that mode, with a separate mic gain setting, so you don't have to keep swapping the mic cable over. At the moment you have to change the mic input manually, but I think one of the things on the list is that it will remember the setting. You can also have different filter settings for data, e.g. a different center frequency. This is great. The TS-2000, which is widely used by WSJT enthusiasts on VHF, doesn't have this capability, as it has no special DATA mode or any other way of memorizing all these configurational differences. You have to manually change all this stuff ( six or so settings) every time you go from WSJT to SSB to WSJT again. I'm really looking forward to getting my K3 for so MANY reasons! Now here is another one I didn't know about... April can't come soon enough! Bill W5WVO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Data-A PSK31
Trevor Smithers wrote: What are the benefits of using Data-A mode for psk31 as opposed to standard USB. The manual p29, mentions that DATA mode offers several benefits not available in SSB modes however other than automatically setting CMP to 0, I can't see much else happening. Does Data-A route the signal differently to standard SSB for instance. What am I missing? You can select the back sockets for the audio input for that mode, with a separate mic gain setting, so you don't have to keep swapping the mic cable over. At the moment you have to change the mic input manually, but I think one of the things on the list is that it will remember the setting. You can also have different filter settings for data, e.g. a different center frequency. - Julian, G4ILO K3 s/n: 222 K2 s/n: 392 G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf -- View this message in context: http://www.nabble.com/K3-Data-A--PSK31-tp15352360p15360946.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K3 Data-A PSK31
A feature to remember the MIC SEL source by mode is in the firmware now being tested by the field test team. 73 Greg AB7R -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Bill W5WVO Sent: Friday, February 08, 2008 10:24 AM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 Data-A PSK31 G4ILO wrote: You can select the back sockets for the audio input for that mode, with a separate mic gain setting, so you don't have to keep swapping the mic cable over. At the moment you have to change the mic input manually, but I think one of the things on the list is that it will remember the setting. You can also have different filter settings for data, e.g. a different center frequency. This is great. The TS-2000, which is widely used by WSJT enthusiasts on VHF, doesn't have this capability, as it has no special DATA mode or any other way of memorizing all these configurational differences. You have to manually change all this stuff ( six or so settings) every time you go from WSJT to SSB to WSJT again. I'm really looking forward to getting my K3 for so MANY reasons! Now here is another one I didn't know about... April can't come soon enough! Bill W5WVO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.19.21/1266 - Release Date: 2/8/2008 10:06 AM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.19.21/1266 - Release Date: 2/8/2008 10:06 AM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com