Re: [Elecraft] K3 memory editor

[G4GNX]

The issue I was having with the Elecraft Frequency Memory Editor has now been 
resolved, thanks to a suggestion by Dick, K6KR.

Dick suggested using the Trace option to see if I could capture where the stall 
was taking place. When I went to turn the Trace option on, I realised that it 
was already on, so decided to firstly test the Editor with Trace turned off. 
Bingo! All works as expected with no stalling.

Having only just used the Editor for the first time, I did not realise that the 
Trace window is does not show in normal operation. The Editor still stalls with 
Trace on, but this may be normal. I’m not aware whether Trace is on by default 
when the program is installed, probably not, but it got turned on somehow!

I hope my experience will provide a fix for others who have experienced a 
similar ‘issue’.

Once again, this proves that the choice of Elecraft is the best there can be. 
Where else do you get a direct reply from the author of the software within 
hours?

Thanks Dick for taking time out of your busy schedule. I know you didn’t 
actually have to fix anything, but if you’d not made the suggestion about using 
Trace, it may have taken me many hours to find the problem.

73,

Alan. G4GNX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 memory editor

[G4GNX]

I realise that it's only two of us so far, but I suspect it's a bug.

Hopefully, Elecraft will fix it.

73,

Alan. G4GNX

-Original Message- 
From: Brian D

Sent: Saturday, June 24, 2017 11:33 AM
To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 memory editor

I have exactly the same problem using it with my KX3 (win10).


"G4GNX" <g4...@g4gnx.com> wrote:


I just started using the K3 memory editor (v1.5.7.20 dated 2015) for the
first time and I find it behaves in a strange way, depending whether a
memory has content or not.

At present I have general memories 0 thru 23 loaded with data and memories
85 thru 99 also loaded. All other memories are ‘empty’.

If I try to read all memories from the K3, the editor program reaches
memory 24 (empty) and stalls. If I click the Cancel button, it reports
‘cancelling’ but does nothing. I can abort the action by clicking the red
close icon. When I check the ‘spreadsheet’ I find that memories 0 thru 23
are filled and displayed, but not memories 85 thru 99. The only way to
read memories 85 thru 99 is to ‘select’ them first, then read selected.
Attempting to read any empty memory individually results in the function
stalling.

I also tried clearing a single memory entry and uploading it to the K3,
which seems to work OK, but attempting to read it back, results in a
stall.

Is this normal behavior – a bug, or do I have an old or corrupted memory
editor.


--
Brian D
G3VGZ  YarmEngland

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 memory editor

[Brian D]

I have exactly the same problem using it with my KX3 (win10).


"G4GNX"  wrote:

> I just started using the K3 memory editor (v1.5.7.20 dated 2015) for the
> first time and I find it behaves in a strange way, depending whether a
> memory has content or not.
> 
> At present I have general memories 0 thru 23 loaded with data and memories
> 85 thru 99 also loaded. All other memories are ‘empty’.
> 
> If I try to read all memories from the K3, the editor program reaches
> memory 24 (empty) and stalls. If I click the Cancel button, it reports
> ‘cancelling’ but does nothing. I can abort the action by clicking the red
> close icon. When I check the ‘spreadsheet’ I find that memories 0 thru 23
> are filled and displayed, but not memories 85 thru 99. The only way to
> read memories 85 thru 99 is to ‘select’ them first, then read selected.
> Attempting to read any empty memory individually results in the function
> stalling.
> 
> I also tried clearing a single memory entry and uploading it to the K3,
> which seems to work OK, but attempting to read it back, results in a
> stall.
> 
> Is this normal behavior – a bug, or do I have an old or corrupted memory
> editor.

-- 
Brian D
G3VGZ  YarmEngland
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 memory editor

[G4GNX]

I just started using the K3 memory editor (v1.5.7.20 dated 2015) for the first 
time and I find it behaves in a strange way, depending whether a memory has 
content or not.

At present I have general memories 0 thru 23 loaded with data and memories 85 
thru 99 also loaded. All other memories are ‘empty’.

If I try to read all memories from the K3, the editor program reaches memory 24 
(empty) and stalls. If I click the Cancel button, it reports ‘cancelling’ but 
does nothing. I can abort the action by clicking the red close icon.
When I check the ‘spreadsheet’ I find that memories 0 thru 23 are filled and 
displayed, but not memories 85 thru 99. The only way to read memories 85 thru 
99 is to ‘select’ them first, then read selected.
Attempting to read any empty memory individually results in the function 
stalling.

I also tried clearing a single memory entry and uploading it to the K3, which 
seems to work OK, but attempting to read it back, results in a stall.

Is this normal behavior – a bug, or do I have an old or corrupted memory editor.

73,

Alan. G4GNX

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 memory editor

[David Cole]

Chris,
I can get it to work some...  Use the little squares on the left to do
the cut, then use the actual data entry field to do the paste...  

Not sure what Elecraft did for cut and paste, but it does not work as I
would expect it to work either.
-- 
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net

For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
For MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info


On Mon, 2015-07-20 at 14:29 +1000, Chris Meagher wrote:
 Using the memory editor, cut and paste does not work
 on my 'spreadsheet'. Not via toolbar or menu or keyboard control c  v
 Clues anyone?
 Chris VK2ACD   K2 K3 KX3 etc
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 Message delivered to d...@nk7z.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 memory editor

[Chris Meagher]

Using the memory editor, cut and paste does not work
on my 'spreadsheet'. Not via toolbar or menu or keyboard control c  v
Clues anyone?
Chris VK2ACD   K2 K3 KX3 etc
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 Memory editor

[Mark Forsyth]

Hi folks,

Is there an easy way to import a CSV file of frequencies in to the K3 memory
editor.

I'm looking to avoid a lenghty typo-thon entering a swag of VK3 repeaters so
that I can upload them to my KX3.

Cheers,
Mark F...
VK3ZMF / VK3KW
KX3 with the lot # 1675
KXPA100 # 530
PX3 # 233


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 memory editor programming 2m repeaters

[Keith Heimbold]

Very funny. But no one answered my question regarding memory editor. I put it 
the VFO A frequencies and offsets and tones for the repeaters for the trip from 
Westlake village to Mammoth but was wondering if I need to put in a frequency 
for VFO B or does the offset automatically take care of that.

Thanks,

Keith
AK6ZZ

Sent from my iPhone please excuse typos

On Dec 11, 2012, at 5:26 PM, Rick Bates happymooseph...@gmail.com wrote:

 Welcome to life in Cali.  ;o)
 
 Rick wa6nhc
 
 On 12 December 2012 11:40, Fred Jensen k6...@foothill.net wrote:
 
 On 12/11/2012 12:43 PM, Keith Heimbold wrote:
 
 Tomorrow night I am heading up with clients to mammoth for a
 snowboarding / skiing business trip
 
 Snowboarding, Skiing, and Business trip in the same sentence is an
 oxymoron.
 
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3 memory editor programming 2m repeaters

[Keith Heimbold]

Tomorrow night I am heading up with clients to mammoth for a snowboarding / 
skiing business trip and I am trying to program the repeaters for the drive up. 
I am not too familiar with 2m and was a little confused on programming the 
memory editor. 
Any quick tips would be awesome. So stoked to get some boarding in at mammoth. 

Thanks,

Keith
AK6ZZ

Sent from my iPhone please excuse typos
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 memory editor programming 2m repeaters

[Fred Jensen]

On 12/11/2012 12:43 PM, Keith Heimbold wrote:

Tomorrow night I am heading up with clients to mammoth for a
snowboarding / skiing business trip


Snowboarding, Skiing, and Business trip in the same sentence is an 
oxymoron.


73,

Fred K6DGW
- Northern California Contest Club
- CU in the 2013 Cal QSO Party 5-6 Oct 2013
- www.cqp.org

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 memory editor programming 2m repeaters

[Gary Gregory]

:-)

Giggle.

Bet the combination will look good on the Tax Forms eh?

73's

Gary

On 12 December 2012 11:40, Fred Jensen k6...@foothill.net wrote:

 On 12/11/2012 12:43 PM, Keith Heimbold wrote:

 Tomorrow night I am heading up with clients to mammoth for a
 snowboarding / skiing business trip


 Snowboarding, Skiing, and Business trip in the same sentence is an
 oxymoron.

 73,

 Fred K6DGW
 - Northern California Contest Club
 - CU in the 2013 Cal QSO Party 5-6 Oct 2013
 - www.cqp.org

 __**__**__
 Elecraft mailing list
 Home: 
 http://mailman.qth.net/**mailman/listinfo/elecrafthttp://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.**htmhttp://mailman.qth.net/mmfaq.htm
 Post: mailto:elecr...@mailman.qth.**net Elecraft@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html




-- 
*Gary - VK1ZZ
Motorhome Portable
The Shack*
*Elecraft K3
P3 Panadapter
KPA500FT
KAT500FT**
KX3-K
*
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 memory editor programming 2m repeaters

[Rick Bates]

Welcome to life in Cali.  ;o)

Rick wa6nhc

On 12 December 2012 11:40, Fred Jensen k6...@foothill.net wrote:

 On 12/11/2012 12:43 PM, Keith Heimbold wrote:

 Tomorrow night I am heading up with clients to mammoth for a
 snowboarding / skiing business trip


 Snowboarding, Skiing, and Business trip in the same sentence is an
 oxymoron.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 Memory Editor and EXCEL Spreadsheet

[Dick Dievendorff]

There is a way to move a group of lines with the K3 Memory Editor grid.  You
can use this to insert a blank line (as well as more involved moving).

Select (at the left margin) the line you want to empty and the lines below.
Press CTRL-X to cut the selected lines.  Cut copies to the clipboard and
deletes.

Select the desired target line, and then press CTRL+V to paste the
clipboard contents into the target line (and its successors, using the
length of the clipboard).  

This is what I meant by Cut, copy and paste operate on selected rows under
the Edit Menu topic in the admittedly sparse K3 Frequency Memory Editor Help
page.  

You can use the keyboard cut  paste shortcuts CTRL+X and CTRL+V, or right
click the selected rows for a context menu that includes cut and paste, and
there are cut/copy/paste items on the Edit menu at the top of the dialog.

73 de Dick, K6KR


-Original Message-
From: Bob Jeter [mailto:bobje...@verizon.net] 
Sent: Monday, September 03, 2012 9:33 AM
To: Dick Dievendorff
Subject: Re: K3 Memory Editor and EXCEL Spreadsheet

Thanks Dick,

You are right abt the tags and it was driving me nuts!

I'll try the Notepad

It would be nice if you could provide an insert line command, then I
wouldn't need the editor


Thanks again and 73, Bob K3RSJ

On Sep 3, 2012, at 12:13 PM, Dick Dievendorff wrote:

 Excel seems to create its own tags, which differ from the tags it 
 read.  The saved output is XML, but not the XML tags that the K3 
 Frequency Memory Editor wrote or expects to read.
 
 I'd recommend limiting use of Excel to presentation and printing 
 rather than using it to modify a K3 Frequency Memory Editor XML file.  
 Maybe someone more expert in Excel than I can suggest a procedure to 
 cause Excel to change just the text within tags rather than save tags 
 than differ from the tags it read. I am a casual user of Excel and 
 don't have deep knowledge of its options.
 
 The underlying K3 Frequency Memory XML file is a tree structure. The 
 K3 Frequency Memory Editor does display it as a two-dimensional table
 
 I've used XML Notepad 2007 (a free download) to change XML documents 
 without altering their tags.  It provides a tree view of the XML 
 file, and the ability to make and save changes.
 http://msdn.microsoft.com/en-us/library/aa905339.aspx
 
 I'm using the 2007 version, but it's been updated:
 http://www.toggle.com/lv/group/view/kl37369/Microsoft_XML_Notepad.htm
 
 There may be other XML editors better suited to the task than either 
 Excel or XML Notepad.
 
 I found it easy to use the K3 Frequency Memory Editor's grid control 
 to make changes. Excel has great print formatting capability for those 
 that prefer to save custom-formatted print copies of their frequency
memories.
 
 73 de Dick, K6KR
 
 
 
 
 
 
 
 
 
 -Original Message-
 From: Bob Jeter [mailto:bobje...@verizon.net]
 Sent: Monday, September 03, 2012 8:01 AM
 To: d...@elecraft.com
 Subject: K3 Memory Editor and EXCEL Spreadsheet
 
 Hi Dick,
 
 I'm trying to use EXCEL (2007) for ease of editing
 
 I can't figure out how to do it
 
 I understand it needs to be XML format but I can't get it to work
 
 I appreciate any help you can give
 
 thanks and 73, Bob K3RSJ
 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] [K3] Memory Editor error

[Al Lorona]

Occasionally when writing memories to the K3 with the Frequency Memory Editor I 
see the following error in the write status window:

WriteMemory2State.OnTimerExpiry

yet the memories always seem to be written correctly. 

Should I be concerned with this error?

Al  W6LX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] [K3] Memory Editor error

[Dick Dievendorff]

There are up to ten retries after this message. If all ten retries fail
(each would issue this message), then a further NoResponseException is
generated.
It appears that the first retry succeeded in your case.

Dick, K6KR


-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Al Lorona
Sent: Friday, August 24, 2012 11:15 PM
To: Elecraft Reflector
Subject: [Elecraft] [K3] Memory Editor error



Occasionally when writing memories to the K3 with the Frequency Memory
Editor I see the following error in the write status window:

WriteMemory2State.OnTimerExpiry

yet the memories always seem to be written correctly. 

Should I be concerned with this error?

Al  W6LX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] [K3] Memory Editor error

[Fred Jensen]

I see this same error message, never more than once, and all the 
memories end up correct.

73,

Fred K6DGW
- Northern California Contest Club
- CU in the 2012 Cal QSO Party 6-7 Oct 2012
- www.cqp.org

On 8/25/2012 6:29 AM, Dick Dievendorff wrote:
 There are up to ten retries after this message. If all ten retries fail
 (each would issue this message), then a further NoResponseException is
 generated.
 It appears that the first retry succeeded in your case.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 Memory Editor

[Robby.VY2SS]

1.1.251.0 is what I get when I to that ftp download. 

I notice that although I enter frequency and mode for VFO B as well as VFO
A, only VFO A gets changed on a QSY.

-Robby
VY2SS

--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-Memory-Editor-tp7256344p7259808.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3 Memory Editor

[Fred Jensen]

This was working when I last tried it.  Now, when I do a SEND ALL TO K3, 
some of them seem to go correctly, but some give a timer error 
[something about time expired, it goes by fairly fast].  Do I need to 
reload the K3 Memory Editor program?

73,

Fred K6DGW
- Northern California Contest Club
- CU in the 2012 Cal QSO Party 6-7 Oct 2012
- www.cqp.org

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 Memory Editor

[Dick Dievendorff]

Probably not, but you may need to somehow improve the communications path to
the radio. What version are you using?

Dick


-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Fred Jensen
Sent: Sunday, February 05, 2012 10:23 AM
To: Elecraft Reflector
Subject: [Elecraft] K3 Memory Editor

This was working when I last tried it.  Now, when I do a SEND ALL TO K3,
some of them seem to go correctly, but some give a timer error [something
about time expired, it goes by fairly fast].  Do I need to reload the K3
Memory Editor program?

73,

Fred K6DGW
- Northern California Contest Club
- CU in the 2012 Cal QSO Party 6-7 Oct 2012
- www.cqp.org

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 Memory Editor

[Dick Dievendorff]

Please try the current version, from
ftp://ftp.elecraft.com/tmp/K3/K3FreqMemoryEditor.  It's version 1.0.249.0

73 de Dick, K6KR


-Original Message-
From: Fred Jensen [mailto:k6...@foothill.net] 
Sent: Sunday, February 05, 2012 1:37 PM
To: Dick Dievendorff
Subject: Re: [Elecraft] K3 Memory Editor

On 2/5/2012 11:06 AM, Dick Dievendorff wrote:
 Probably not, but you may need to somehow improve the communications 
 path to the radio. What version are you using?

K3 FW: 4.39

Mem Edit: 1.0.168.1

It says the USB-Ser adapter is running at 38K

I have a P3 so the comm goes there and then to the K3

73,

Fred K6DGW
- Northern California Contest Club
- CU in the 2012 Cal QSO Party 6-7 Oct 2012
- www.cqp.org

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 Memory Editor running under Wine/Linux?

[Leigh L. Klotz Jr WA5ZNU]

You need to edit .wine/system.reg file to tell it about the serial ports.
I've used heather3 (a Thunderbolt GPS-DO monitor) with USB RS232 and it
works FB once you do this.

Here's a random post I found that describes it, but there are a lot of
places that have the workaround.

http://groups.yahoo.com/group/aprsisce/message/7562

Leigh/WA5ZNU

--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-Memory-Editor-running-under-Wine-Linux-tp7081919p7095814.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3 Memory Editor running under Wine/Linux?

[Larry J on Ubuntu 10.04 Desktop]

Any one successfully running  the K3 Memory Editor under Wine in Linux?

I  installed winetricks (http://wiki.winehq.org/winetricks) and the Memory 
Editor program appears to function (Spreadsheet like user interface appears) 
but the Memory Editor program then never picks up my symbolic links to the com 
ports.   The error message reports that The PortName cannot be empty when I 
attempt Read from K3.  The drop down com port selector is blank even though  
my ~/.wine/dosdevices has the suggested symbolic links:

lj@lian2:~./wine/dosdevices  ls -al com1
lrwxrwxrwx 1 lj lj 2011-12-10 10:35  com1 - /dev/ttyS0

My attempts were made under Ubuntu Linux 10.04 and Wine 1.2.2.  Thanks for any 
help.

Larry W0AY
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 Memory Editor running under Wine/Linux?

[Dick Dievendorff]

The .Net framework and Windows versions of the Elecraft Utilities discover Com 
ports through registry key/values defined for this purpose.  Drivers install 
their names there in Windows. I'm away from my code, and don't recall the exact 
key but the key has HARDWARE and SERIALCOMM in it. Try this link for the 
technique

http://eli.thegreenplace.net/2009/07/31/listing-all-serial-ports-on-windows-with-python/

Dick, K6KR

On Dec 10, 2011, at 8:19, Larry J on Ubuntu 10.04 Desktop 
la...@foxgulch.com wrote:

 Any one successfully running  the K3 Memory Editor under Wine in Linux?
 
 I  installed winetricks (http://wiki.winehq.org/winetricks) and the Memory 
 Editor program appears to function (Spreadsheet like user interface appears) 
 but the Memory Editor program then never picks up my symbolic links to the 
 com ports.   The error message reports that The PortName cannot be empty 
 when I attempt Read from K3.  The drop down com port selector is blank even 
 though  my ~/.wine/dosdevices has the suggested symbolic links:
 
 lj@lian2:~./wine/dosdevices  ls -al com1
 lrwxrwxrwx 1 lj lj 2011-12-10 10:35  com1 - /dev/ttyS0
 
 My attempts were made under Ubuntu Linux 10.04 and Wine 1.2.2.  Thanks for 
 any help.
 
 Larry W0AY
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 Memory Editor running under Wine/Linux?

[Nate Bargmann]

* On 2011 10 Dec 12:20 -0600, Larry J on Ubuntu 10.04 Desktop wrote:
 lj@lian2:~./wine/dosdevices  ls -al com1
 lrwxrwxrwx 1 lj lj 2011-12-10 10:35  com1 - /dev/ttyS0
 
 My attempts were made under Ubuntu Linux 10.04 and Wine 1.2.2.  Thanks for 
 any help.

I've never had success with serial ports in Wine although it has been
some time since I tried.  Several months ago on another list someone
reported the later beta releases of Wine will work with built-in serial
ports such as yours, but not with USB to serial adapters that I use.

You may wish to give the later Wine 1.3 releases a try:

https://launchpad.net/~ubuntu-wine/+archive/ppa

Unfortunately, I think the Wine developers main focus is on office apps
and games, not hardware access such as serial ports.

73, de Nate N0NB 

-- 

The optimist proclaims that we live in the best of all
possible worlds.  The pessimist fears this is true.

Ham radio, Linux, bikes, and more: http://www.n0nb.us
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 Memory Editor on 64 bit Dell

[radiori]

Thanks Dick - I have it all working now. I had not unzipped the program
correctly.

-
Brian, K1NW
-- 
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-Memory-Editor-on-64-bit-Dell-tp5840273p5850715.html
Sent from the [K3] mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3 Memory Editor on 64 bit Dell

[b . k . maynard]

Does anyone know if K3 Memory Editor can run on a 64-bit PC? I have not been 
success running my download. XP OS.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 Memory Editor on 64 bit Dell

[Dick Dievendorff]

I developed it on Windows 7 64-bit.  It runs fine on my 64-bit system.

You'll need to install .Net Framework 2.0 if it's not already installed.

73 de Dick, K6KR


-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
b.k.mayn...@verizon.net
Sent: Wednesday, December 15, 2010 12:26 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] K3 Memory Editor on 64 bit Dell

Does anyone know if K3 Memory Editor can run on a 64-bit PC? I have not been
success running my download. XP OS.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3 Memory Editor

[David Pratt]

I have been trying to use the K3 Memory Editor but am having a problem 
with it when trying to set the Repeater Offset on 50 MHz (6 meters) to 
+0.5 (as it is in the UK).  Reading from my K3, the Offset field in the 
editor is blank.  If I enter +0.5 there and then send it to the K3 it 
sets my K3 to +0.6.

Is the Repeater Offset on 6 meters +0.6 in the USA?  If so, can a +0.5 
offset provision be made in the Memory Editor please?

73
-- 
David G4DMP
Leeds, England, UK
--



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 Memory Editor

[Dick Dievendorff]

The intent was to allow entry of an arbitrary offset by typing it in. I'll add 
0.5 to the stock table so that it also appears in the initial pull-down

73 de Dick, K6KR

On Dec 14, 2010, at 0:50, David Pratt da...@g4dmp.fsnet.co.uk wrote:

 I have been trying to use the K3 Memory Editor but am having a problem 
 with it when trying to set the Repeater Offset on 50 MHz (6 meters) to 
 +0.5 (as it is in the UK).  Reading from my K3, the Offset field in the 
 editor is blank.  If I enter +0.5 there and then send it to the K3 it 
 sets my K3 to +0.6.
 
 Is the Repeater Offset on 6 meters +0.6 in the USA?  If so, can a +0.5 
 offset provision be made in the Memory Editor please?
 
 73
 -- 
 David G4DMP
 Leeds, England, UK
 --
 
 
 
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 Memory Editor

[Rose]

David,

The 6M repeater offsets here in the US are either 1.0 or 1.6 MHZ.  There are
exceptions, but not many.  A duplexer for only a .5 MHZ frequency separation
would be difficult to build.

73!

Ken Kopp - K0PP
Montana VHF / UHF Frequency Coordinator
elecraftcov...@gmail.com

On Tue, Dec 14, 2010 at 1:50 AM, David Pratt da...@g4dmp.fsnet.co.uk wrote
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 Memory Editor

[David Pratt]

It's obviously not too difficult for the repeater keepers in the UK,
Ken. All the 6 metre repeaters on 50MHz have a input/output offset of
500kHz.

73 de David G4DMP

In a recent message, Rose elecraftcov...@gmail.com writes
The 6M repeater offsets here in the US are either 1.0 or 1.6 MHZ. 
There are exceptions, but not many.  A duplexer for only a .5 MHZ
frequency separation would be difficult to build.
-- 
 + - - - - - - - - - - - - - - - - +
 | David M Pratt, Kippax, Leeds.   |
 | Website: http://www.g4dmp.co.uk |
 + - - - - - - - - - - - - - - - - +



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 Memory Editor

[tux man]

On 12/14/2010 01:52 PM, David Pratt wrote:
 It's obviously not too difficult for the repeater keepers in the UK,
 Ken. All the 6 metre repeaters on 50MHz have a input/output offset of
 500kHz.

 73 de David G4DMP


that's why you folks in Europe get things done.
On this side, it's called mass confusion leading to no progress.

(smile)

72
Ron, wb1hga
as you slide down the bannister of life, may the splinters point the 
wrong way
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 Memory Editor

[Geoffrey Mackenzie-Kennedy]

David,

FWIW back in the Stone Age when I had VE callsigns, the input/output 
offset of the N.American 2m repeaters was usually 600 kHz. The same offset 
was used on 6m, although there were not any local repeaters on 6m at the 
time (1950-1974)

73,
Geoff
GM4ESD


David Pratt wrote on Tuesday, December 14, 2010, at 6:52 PM:

 It's obviously not too difficult for the repeater keepers in the UK,
 Ken. All the 6 metre repeaters on 50MHz have a input/output offset of
 500kHz.





__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 memory editor question

[Dick Dievendorff]

The transverter mappings are read from the K3 just before the first memory
is read or written.  Then the editor knows what frequencies to accept in the
XVn memories. 

 

Dick, K6KR

 

 

From: K9ZTV [mailto:k9...@socket.net] 
Sent: Monday, August 30, 2010 8:32 PM
To: Dick Dievendorff
Subject: Re: [Elecraft] K3 memory editor question

 

Dick . . .

Explain please (on reflector).

73,

Kent  K9ZTV



On 8/30/2010 10:08 PM, Dick Dievendorff wrote: 

Please read or write at least one memory from the K3. That reads the
transverter band assignments. 
 
Dick, K6KR
 
 
 
 
On Aug 30, 2010, at 7:42 PM, k...@comcast.net wrote:
 

I am trying to use the memory editor program to set up my common 2M
frequencies.  I have the internal 2M transverter installed.  The program is
giving me an invalid frequency for all of the frequencies in the 144-147 mhz
range.  How do I tell it to accept them?  Thanks  K7UA 

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3 memory editor question

[k7ua]

I am trying to use the memory editor program to set up my common 2M 
frequencies.  I have the internal 2M transverter installed.  The program is 
giving me an invalid frequency for all of the frequencies in the 144-147 mhz 
range.  How do I tell it to accept them?  Thanks  K7UA 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 memory editor question

[Dick Dievendorff]

Please read or write at least one memory from the K3. That reads the 
transverter band assignments. 

Dick, K6KR


Sent from my iPhone

On Aug 30, 2010, at 7:42 PM, k...@comcast.net wrote:

 I am trying to use the memory editor program to set up my common 2M 
 frequencies.  I have the internal 2M transverter installed.  The program is 
 giving me an invalid frequency for all of the frequencies in the 144-147 mhz 
 range.  How do I tell it to accept them?  Thanks  K7UA 
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3 memory editor printing

[Lee Trout]

I find that selecting and then copying my memory list in the editor and 
then pasting it into Excel, lets me massage it quite nicely (colors, 
fonts, etc.) for printing.  It sure is a great way to manage memories.  
Thanks Elecraft.  73, Lee (K9CM)
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 memory editor printing

[Dick Dievendorff]

Thanks, Lee. Print is on my to do list but I wasn't planning to get very fancy. 
A spread sheet allows you to play with column sizing, fonts, colors, and remove 
columns that aren't of interest. 

Dick, K6KR

Sent from my iPhone

On Aug 8, 2010, at 12:40 PM, Lee Trout trou...@gmail.com wrote:

 I find that selecting and then copying my memory list in the editor and 
 then pasting it into Excel, lets me massage it quite nicely (colors, 
 fonts, etc.) for printing.  It sure is a great way to manage memories.  
 Thanks Elecraft.  73, Lee (K9CM)
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3 Memory Editor

[Fred Jensen]

Where do I find it?  The latest beta firmware release notes refers to it.

73,

Fred K6DGW
- Northern California Contest Club
- CU in the 2010 Cal QSO Party 2-3 Oct 2010
- www.cqp.org
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 Memory Editor

[Fred Jensen]

Dick answered my question directly ... it's not quite ready for prime 
time but soon.

73,

Fred K6DGW
- Northern California Contest Club
- CU in the 2010 Cal QSO Party 2-3 Oct 2010
- www.cqp.org
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 Memory Editor

[Jim Miller KG0KP]

I LOVE this K3 and Elecraft.  I buy a rig because of what it is and it just 
keeps getting better and better.

73, de Jim KG0KP

- Original Message - 
From: Fred Jensen k6...@foothill.net
To: Elecraft Reflector elecraft@mailman.qth.net
Sent: Tuesday, May 18, 2010 4:58 PM
Subject: [Elecraft] K3 Memory Editor


 Where do I find it?  The latest beta firmware release notes refers to it.

 73,

 Fred K6DGW
 - Northern California Contest Club
 - CU in the 2010 Cal QSO Party 2-3 Oct 2010
 - www.cqp.org
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 Memory Editor software application version 1.0.102.0 (4/12 version)

[Mike]

Dick,
I just installed the latest and greatest. I may have missed something, 
but I see no problem with tabbing about the grid. It behaves exactly 
like I would expect a Windows control to do.

Clicking the 'button' on the left end of a row selects the row, and 
highlights it. Clicking the the cursor anywhere else does NOT select the 
row, assuming your grid control is set to highlight if a row is selected.

Pressing the TAB key moves the selection/focus from cell to cell 
horizontally. When it reaches the end of a row, it drops to the next row.

I don't have any xverters, so maybe I'm not seeing what some others saw. 
Win XP SP3.

73, Mike NF4L

Dick Dievendorff wrote:

 I have most of these on a list. I’m not sure how to do some of them 
 with the grid. When a row is “selected” it changes color. You select a 
 row by clicking a mouse cursor in it. I’ll research this.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 Memory Editor software application (new release)

[David Ferrington, M0XDF]

I don't have the beta, but can confirm a large number of repeaters in the UK 
use receive CTCSS encoding.
73 de M0XDF, K3 #174
-- 
We can't solve problems by using the same kind of thinking we used when we
created them. -Albert Einstein, physicist, Nobel laureate (1879-1955)

On 10 Apr 2010, at 07:16, Lew Phelps K6LMP wrote:

 On repeater setup, one can only set  a CTCSS tone for transmit encode.  Some 
 repeaters are using receive encoding as well, o block out fringe repeaters on 
 the same frequency.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3 Memory Editor (PC application): looking for testers

[Wayne Burdick]

Hi all,

Our PC software engineer, Dick (K6KR--not to be confused with N6KR :)  
has completed the first release of the K3 Frequency Memory Editor. It  
is Windows-only at present, but we hope to provide Mac and Linux  
versions in the future.

This application helps you maintain your K3's frequency memories using  
a spreadsheet-like editor. It handles all regular memories (00-99)  
and, optionally, per-band quick-memories (M1-M4 for each band). Once  
you've sent the data to the K3, you can recall memories using either  
the MV switch on the K3's front panel, or the editor's QSY buttons.  
You can even save sets of memories in PC files and share them with  
other K3 users. This might be useful for setting up multiple K3s for a  
contest, etc.

At present the spreadsheet allows display/edit of VFO A and B  
frequencies and modes, repeater offsets and tones, the 5-character  
memory label, and a larger description field. Unused (blank) memories  
can be hidden or displayed. We'll add more data fields in future  
releases, along with cut/paste capability.

If you're interested in testing this early release of the memory  
editor, please email me directly (n6kr at elecraft dot com). To use  
it, you'll also need to install the latest field-test K3 firmware,  
which I'll send you, along with full instructions and release notes.

73,
Wayne
N6KR



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 Memory Editor (PC application): looking for testers

[Lance Collister]

This could be pretty handy for us to pass around memory files for 6m  
indicators 
;-)  VY 73, Lance

On 4/7/2010 5:09 PM, Wayne Burdick wrote:
 Hi all,

 Our PC software engineer, Dick (K6KR--not to be confused with N6KR :)
 has completed the first release of the K3 Frequency Memory Editor. It
 is Windows-only at present, but we hope to provide Mac and Linux
 versions in the future.

 This application helps you maintain your K3's frequency memories using
 a spreadsheet-like editor. It handles all regular memories (00-99)
 and, optionally, per-band quick-memories (M1-M4 for each band). Once
 you've sent the data to the K3, you can recall memories using either
 the MV switch on the K3's front panel, or the editor's QSY buttons.
 You can even save sets of memories in PC files and share them with
 other K3 users. This might be useful for setting up multiple K3s for a
 contest, etc.

 At present the spreadsheet allows display/edit of VFO A and B
 frequencies and modes, repeater offsets and tones, the 5-character
 memory label, and a larger description field. Unused (blank) memories
 can be hidden or displayed. We'll add more data fields in future
 releases, along with cut/paste capability.

 If you're interested in testing this early release of the memory
 editor, please email me directly (n6kr at elecraft dot com). To use
 it, you'll also need to install the latest field-test K3 firmware,
 which I'll send you, along with full instructions and release notes.

 73,
 Wayne
 N6KR



 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html




-- 
Lance Collister, W7GJ (ex: WN3GPL, WA3GPL, WA1JXN, WA1JXN/C6A, ZF2OC/ZF8, 
E51SIX)
P.O. Box 73
Frenchtown, MT  59834  USA
QTH: DN27UB
TEL: (406) 626-5728   URL: http://www.bigskyspaces.com/w7gj
LIVE MESSENGER CHAT: w...@hotmail.com
2m DXCC #11, 6m DXCC #815

Interested in 6m EME?  Ask me about subscribing to the Magic Band EME email!
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html