Re: [Elecraft] K3 Memory Question
I think he might be referring to the Canadian time station CHU on 7850 kHz. Charlie k3ICH -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm Sent: Tuesday, February 21, 2017 11:25 AM To: Ron Manfredi <wa2...@optonline.net>; elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 Memory Question What "40 meter WWV frequency" - WWV transmits on 5, 10, 15 and 20MHz. If you want to set a memory to 10MHz WWV, you should select 30 meters, tune to 10.000.00 and set the memory from there. 73, W3FPR On 2/21/2017 9:58 AM, Ron Manfredi wrote: > > I am trying to get my head around the memory set-up on the K3. Must be > missing something. > I have set memories (and config) 0-9 as band switches, and that seems > to be OK; the last frequency I used on each band is stored in memory > when I go back there, but I put the 40 meter WWV frequency into memory > 11, and now my 40 meter memory (#1) shows that frequency when I > select it. How can I save a specific frequency in memory, without having it change ? > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > donw...@embarqmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to pin...@erols.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Memory Question
Ramon, Thanks for the advice. That is probably what my difficulty is; I will check when I get back to the rig tonight. Don, I realized after I sent the message that I meant CHU, (not WWV) but did not want to make another post just for the correction. The basic memory question was valid though, no matter what frequency I was talking about. On 2/21/2017 11:24 AM, Don Wilhelm wrote: What "40 meter WWV frequency" - WWV transmits on 5, 10, 15 and 20MHz. If you want to set a memory to 10MHz WWV, you should select 30 meters, tune to 10.000.00 and set the memory from there. 73, W3FPR On 2/21/2017 9:58 AM, Ron Manfredi wrote: I am trying to get my head around the memory set-up on the K3. Must be missing something. I have set memories (and config) 0-9 as band switches, and that seems to be OK; the last frequency I used on each band is stored in memory when I go back there, but I put the 40 meter WWV frequency into memory 11, and now my 40 meter memory (#1) shows that frequency when I select it. How can I save a specific frequency in memory, without having it change ? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to donw...@embarqmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Memory Question
What "40 meter WWV frequency" - WWV transmits on 5, 10, 15 and 20MHz. If you want to set a memory to 10MHz WWV, you should select 30 meters, tune to 10.000.00 and set the memory from there. 73, W3FPR On 2/21/2017 9:58 AM, Ron Manfredi wrote: I am trying to get my head around the memory set-up on the K3. Must be missing something. I have set memories (and config) 0-9 as band switches, and that seems to be OK; the last frequency I used on each band is stored in memory when I go back there, but I put the 40 meter WWV frequency into memory 11, and now my 40 meter memory (#1) shows that frequency when I select it. How can I save a specific frequency in memory, without having it change ? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to donw...@embarqmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 Memory Question
I am trying to get my head around the memory set-up on the K3. Must be missing something. I have set memories (and config) 0-9 as band switches, and that seems to be OK; the last frequency I used on each band is stored in memory when I go back there, but I put the 40 meter WWV frequency into memory 11, and now my 40 meter memory (#1) shows that frequency when I select it. How can I save a specific frequency in memory, without having it change ? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Memory Question
Hi, No... There are TWO banks of CW memory. Not VFO, but banks of memory for CW... Look at the programming tool, and you will see BANK 1 and BANK 2. Press and hold REC button on your K3 to switch between BANK 1, and BANK 2. -- Thanks and 73's, For equipment, and software setups and reviews see: www.nk7z.net for MixW support see; http://groups.yahoo.com/neo/groups/mixw/info for Dopplergram information see: http://groups.yahoo.com/neo/groups/dopplergram/info for MM-SSTV see: http://groups.yahoo.com/neo/groups/MM-SSTV/info On Sun, 2015-01-25 at 03:55 +, Harry Yingst wrote: as in both vfo A and B being programmed the same? __ From: David Cole d...@nk7z.net To: elecraft@mailman.qth.net Sent: Saturday, January 24, 2015 10:33 PM Subject: Re: [Elecraft] K3 Memory Question You are more than likely using BANK A and programming Bank B, or vice-verse, with both programed the same this can happen. -- Thanks and 73's, For equipment, and software setups and reviews see: www.nk7z.net for MixW support see; http://groups.yahoo.com/neo/groups/mixw/info for Dopplergram information see: http://groups.yahoo.com/neo/groups/dopplergram/info for MM-SSTV see: http://groups.yahoo.com/neo/groups/MM-SSTV/info On Sun, 2015-01-25 at 03:25 +, Harry Yingst via Elecraft wrote: I also had one that did that I wound up just correcting it on the radio From: Larry Boekeloo lboeke...@sbcglobal.net To: elecraft@mailman.qth.net elecraft@mailman.qth.net Sent: Saturday, January 24, 2015 8:34 PM Subject: [Elecraft] K3 Memory Question I have my K3 memories setup so I can hop and skip around the bands and modes. I use the K3 memory manager and it works well. For instance 20 mtrs: 14.005 CW - Memory 27 14.080 FSK D - Memory 28 14.195 USB - Memory 29 On 30 mtrs I have: 10.105 CW - Memory 24 10.120 CW - Memory 25 10.140 FSK D - Memory 26 However, every time I go to 10.140 (Memory 26) I have to change the K3 from DATA A to FSK D. I've deleted the memory, rewritten it but it won't stay on FSK D I have every band set up like that and 30 mtrs is the only one I have trouble with. Has anyone seen this or know what I've done incorrectly? Thanks. Larry, KN8N __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to hlyin...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to d...@nk7z.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to hlyin...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Memory Question
I think we may be confusing different kinds of memory. There are CW message memories, in two banks. There are frequency memories that store VFO frequencies and modes, more than a hundred of these... There are also memories for storing strings of commands (macros). Dick, K6KR On Jan 25, 2015, at 08:36, David Cole d...@nk7z.net wrote: Hi, No... There are TWO banks of CW memory. Not VFO, but banks of memory for CW... Look at the programming tool, and you will see BANK 1 and BANK 2. Press and hold REC button on your K3 to switch between BANK 1, and BANK 2. -- Thanks and 73's, For equipment, and software setups and reviews see: www.nk7z.net for MixW support see; http://groups.yahoo.com/neo/groups/mixw/info for Dopplergram information see: http://groups.yahoo.com/neo/groups/dopplergram/info for MM-SSTV see: http://groups.yahoo.com/neo/groups/MM-SSTV/info On Sun, 2015-01-25 at 03:55 +, Harry Yingst wrote: as in both vfo A and B being programmed the same? __ From: David Cole d...@nk7z.net To: elecraft@mailman.qth.net Sent: Saturday, January 24, 2015 10:33 PM Subject: Re: [Elecraft] K3 Memory Question You are more than likely using BANK A and programming Bank B, or vice-verse, with both programed the same this can happen. -- Thanks and 73's, For equipment, and software setups and reviews see: www.nk7z.net for MixW support see; http://groups.yahoo.com/neo/groups/mixw/info for Dopplergram information see: http://groups.yahoo.com/neo/groups/dopplergram/info for MM-SSTV see: http://groups.yahoo.com/neo/groups/MM-SSTV/info On Sun, 2015-01-25 at 03:25 +, Harry Yingst via Elecraft wrote: I also had one that did that I wound up just correcting it on the radio From: Larry Boekeloo lboeke...@sbcglobal.net To: elecraft@mailman.qth.net elecraft@mailman.qth.net Sent: Saturday, January 24, 2015 8:34 PM Subject: [Elecraft] K3 Memory Question I have my K3 memories setup so I can hop and skip around the bands and modes. I use the K3 memory manager and it works well. For instance 20 mtrs: 14.005 CW - Memory 27 14.080 FSK D - Memory 28 14.195 USB - Memory 29 On 30 mtrs I have: 10.105 CW - Memory 24 10.120 CW - Memory 25 10.140 FSK D - Memory 26 However, every time I go to 10.140 (Memory 26) I have to change the K3 from DATA A to FSK D. I've deleted the memory, rewritten it but it won't stay on FSK D I have every band set up like that and 30 mtrs is the only one I have trouble with. Has anyone seen this or know what I've done incorrectly? Thanks. Larry, KN8N __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to hlyin...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to d...@nk7z.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to hlyin...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to d...@elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 Memory Question
I have my K3 memories setup so I can hop and skip around the bands and modes. I use the K3 memory manager and it works well. For instance 20 mtrs: 14.005 CW - Memory 27 14.080 FSK D - Memory 28 14.195 USB - Memory 29 On 30 mtrs I have: 10.105 CW - Memory 24 10.120 CW - Memory 25 10.140 FSK D - Memory 26 However, every time I go to 10.140 (Memory 26) I have to change the K3 from DATA A to FSK D. I've deleted the memory, rewritten it but it won't stay on FSK D I have every band set up like that and 30 mtrs is the only one I have trouble with. Has anyone seen this or know what I've done incorrectly? Thanks. Larry, KN8N __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Memory Question
You are more than likely using BANK A and programming Bank B, or vice-verse, with both programed the same this can happen. -- Thanks and 73's, For equipment, and software setups and reviews see: www.nk7z.net for MixW support see; http://groups.yahoo.com/neo/groups/mixw/info for Dopplergram information see: http://groups.yahoo.com/neo/groups/dopplergram/info for MM-SSTV see: http://groups.yahoo.com/neo/groups/MM-SSTV/info On Sun, 2015-01-25 at 03:25 +, Harry Yingst via Elecraft wrote: I also had one that did that I wound up just correcting it on the radio From: Larry Boekeloo lboeke...@sbcglobal.net To: elecraft@mailman.qth.net elecraft@mailman.qth.net Sent: Saturday, January 24, 2015 8:34 PM Subject: [Elecraft] K3 Memory Question I have my K3 memories setup so I can hop and skip around the bands and modes. I use the K3 memory manager and it works well. For instance 20 mtrs: 14.005 CW - Memory 27 14.080 FSK D - Memory 28 14.195 USB - Memory 29 On 30 mtrs I have: 10.105 CW - Memory 24 10.120 CW - Memory 25 10.140 FSK D - Memory 26 However, every time I go to 10.140 (Memory 26) I have to change the K3 from DATA A to FSK D. I've deleted the memory, rewritten it but it won't stay on FSK D I have every band set up like that and 30 mtrs is the only one I have trouble with. Has anyone seen this or know what I've done incorrectly? Thanks. Larry, KN8N __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to hlyin...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to d...@nk7z.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Memory Question
I also had one that did that I wound up just correcting it on the radio From: Larry Boekeloo lboeke...@sbcglobal.net To: elecraft@mailman.qth.net elecraft@mailman.qth.net Sent: Saturday, January 24, 2015 8:34 PM Subject: [Elecraft] K3 Memory Question I have my K3 memories setup so I can hop and skip around the bands and modes. I use the K3 memory manager and it works well. For instance 20 mtrs: 14.005 CW - Memory 27 14.080 FSK D - Memory 28 14.195 USB - Memory 29 On 30 mtrs I have: 10.105 CW - Memory 24 10.120 CW - Memory 25 10.140 FSK D - Memory 26 However, every time I go to 10.140 (Memory 26) I have to change the K3 from DATA A to FSK D. I've deleted the memory, rewritten it but it won't stay on FSK D I have every band set up like that and 30 mtrs is the only one I have trouble with. Has anyone seen this or know what I've done incorrectly? Thanks. Larry, KN8N __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to hlyin...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Memory Question
as in both vfo A and B being programmed the same? From: David Cole d...@nk7z.net To: elecraft@mailman.qth.net Sent: Saturday, January 24, 2015 10:33 PM Subject: Re: [Elecraft] K3 Memory Question You are more than likely using BANK A and programming Bank B, or vice-verse, with both programed the same this can happen. -- Thanks and 73's, For equipment, and software setups and reviews see: www.nk7z.net for MixW support see; http://groups.yahoo.com/neo/groups/mixw/info for Dopplergram information see: http://groups.yahoo.com/neo/groups/dopplergram/info for MM-SSTV see: http://groups.yahoo.com/neo/groups/MM-SSTV/info On Sun, 2015-01-25 at 03:25 +, Harry Yingst via Elecraft wrote: I also had one that did that I wound up just correcting it on the radio From: Larry Boekeloo lboeke...@sbcglobal.net To: elecraft@mailman.qth.net elecraft@mailman.qth.net Sent: Saturday, January 24, 2015 8:34 PM Subject: [Elecraft] K3 Memory Question I have my K3 memories setup so I can hop and skip around the bands and modes. I use the K3 memory manager and it works well. For instance 20 mtrs: 14.005 CW - Memory 27 14.080 FSK D - Memory 28 14.195 USB - Memory 29 On 30 mtrs I have: 10.105 CW - Memory 24 10.120 CW - Memory 25 10.140 FSK D - Memory 26 However, every time I go to 10.140 (Memory 26) I have to change the K3 from DATA A to FSK D. I've deleted the memory, rewritten it but it won't stay on FSK D I have every band set up like that and 30 mtrs is the only one I have trouble with. Has anyone seen this or know what I've done incorrectly? Thanks. Larry, KN8N __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to hlyin...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to d...@nk7z.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to hlyin...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] [K3] Memory Question
I did not see anything on this in the User Man (but the eyes are old). Is there a way to clear a general-purpose memory entry? I realize that having data in a g-p mem slot is not going to cause bad things to happen. However, being anal retentive, I would like to completely clear a mem entry which no longer has any meaning (rather than try to remember why I made the entry). Mike W5FTD ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
