Re: [Elecraft] K3 Momentary no transmit
G'morning, Frank: I just tried to duplicate what you are experiencing and was unsuccessful. No interruptions. K3 #202 with latest firmware. 73, Ken K3IU ~~~ On 11/22/2015 8:54 PM, n...@comcast.net wrote: I discovered a problem with my K3, s/n 83xx. With nothing but power and a dummy load connected to the K3, while in TUNE on 10 meters, PWR adjusted to 15 watts, the K3 momentarily stops transmitting every 15 seconds. When I push the TUNE button it starts transmitting. After 15 seconds the K3 momentarily stops transmitting for about a millisecond, again at 30 seconds, again at 45 seconds, and again at 60 seconds and so on. The same result in both CW and DATA modes. If I reduce the power to under 12 watts, the K3 transmits continually. Has anyone experienced or duplicated this characteristic with their K3? Thanks/73, Frank N7FN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to kenk...@cox.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Momentary no transmit
Ken, This is firmware problem acknowledged by Elecraft, and previously discussed in this forum If you don't do digital comms, one of the easiest ways to see this is to put the rig in TEST mode and turn on the 2-tone test. Monitor the "transmit" signal with headphones and you will hear it drop out every 15 seconds. The dropout is just for a few milliseconds and sounds similar to a WWV "tick". There may be some variability in rigs, though I doubt it. When I was trouble shooting the problem with Elecraft support, they were unable to duplicate the problem with the rig they initially had on the bench. _ 73, Jim - N4ST -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ken K3IU Sent: Monday, November 23, 2015 03:44 To: n...@comcast.net; elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 Momentary no transmit G'morning, Frank: I just tried to duplicate what you are experiencing and was unsuccessful. No interruptions. K3 #202 with latest firmware. 73, Ken K3IU ~~~ On 11/22/2015 8:54 PM, n...@comcast.net wrote: > I discovered a problem with my K3, s/n 83xx. > With nothing but power and a dummy load connected to the K3, while in > TUNE on 10 meters, PWR adjusted to 15 watts, the K3 momentarily stops > transmitting every 15 seconds. > When I push the TUNE button it starts transmitting. After > 15 seconds the K3 momentarily stops transmitting for about a > millisecond, again at 30 seconds, again at 45 seconds, and again at 60 > seconds and so on. > The same result in both CW and DATA modes. > If I reduce the power to under 12 watts, the K3 transmits continually. > Has anyone experienced or duplicated this characteristic with their > K3? > > Thanks/73, > Frank > N7FN > > > __ > > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: > http://www.qsl.net/donate.html > Message delivered to kenk...@cox.net > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to hamsh...@n4st.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Momentary no transmit
Hi Jim: Now that you mention it, I do recall something about this in the recent past on the reflector. I did my previous test in CW mode putting RF into a dummy load and heard no momentary drop out. I just tried the setup that you suggested below in LSB and I must have one of the rigs that don't produce it because I am not hearing any interruption at any interval. Thanks for the info... 73, Ken K3IU On 11/23/2015 9:34 AM, Jim - N4ST wrote: Ken, This is firmware problem acknowledged by Elecraft, and previously discussed in this forum If you don't do digital comms, one of the easiest ways to see this is to put the rig in TEST mode and turn on the 2-tone test. Monitor the "transmit" signal with headphones and you will hear it drop out every 15 seconds. The dropout is just for a few milliseconds and sounds similar to a WWV "tick". There may be some variability in rigs, though I doubt it. When I was trouble shooting the problem with Elecraft support, they were unable to duplicate the problem with the rig they initially had on the bench. _ 73, Jim - N4ST -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ken K3IU Sent: Monday, November 23, 2015 03:44 To: n...@comcast.net; elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 Momentary no transmit G'morning, Frank: I just tried to duplicate what you are experiencing and was unsuccessful. No interruptions. K3 #202 with latest firmware. 73, Ken K3IU ~~~ On 11/22/2015 8:54 PM, n...@comcast.net wrote: I discovered a problem with my K3, s/n 83xx. With nothing but power and a dummy load connected to the K3, while in TUNE on 10 meters, PWR adjusted to 15 watts, the K3 momentarily stops transmitting every 15 seconds. When I push the TUNE button it starts transmitting. After 15 seconds the K3 momentarily stops transmitting for about a millisecond, again at 30 seconds, again at 45 seconds, and again at 60 seconds and so on. The same result in both CW and DATA modes. If I reduce the power to under 12 watts, the K3 transmits continually. Has anyone experienced or duplicated this characteristic with their K3? Thanks/73, Frank N7FN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to kenk...@cox.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to hamsh...@n4st.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Momentary no transmit
Known software/firmware issue that appears on 12M, 10M and 6M only. Elecraft is aware of it. I wish it was fixed as it drives my amp crazy while working any mode that has 100% duty cycle such as DATA or AM. It is a PITA, and I wish it was resolved. 73 Bob, K4TAX On 11/22/2015 7:54 PM, n...@comcast.net wrote: I discovered a problem with my K3, s/n 83xx. With nothing but power and a dummy load connected to the K3, while in TUNE on 10 meters, PWR adjusted to 15 watts, the K3 momentarily stops transmitting every 15 seconds. When I push the TUNE button it starts transmitting. After 15 seconds the K3 momentarily stops transmitting for about a millisecond, again at 30 seconds, again at 45 seconds, and again at 60 seconds and so on. The same result in both CW and DATA modes. If I reduce the power to under 12 watts, the K3 transmits continually. Has anyone experienced or duplicated this characteristic with their K3? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Momentary no transmit
This drove me nuts when I first got my K3S. After a few days of testing and reconfigurations, it turned out to be a firmware problem that has existed for years. You will never notice it in SSB modes and the dropout occurs in the spaces for CW. A definite annoyance for those of us using digital modes with transmit times longer than 15 seconds. _ 73, Jim - N4ST -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of n...@comcast.net Sent: Sunday, November 22, 2015 20:54 To: elecraft@mailman.qth.net Subject: [Elecraft] K3 Momentary no transmit I discovered a problem with my K3, s/n 83xx. With nothing but power and a dummy load connected to the K3, while in TUNE on 10 meters, PWR adjusted to 15 watts, the K3 momentarily stops transmitting every 15 seconds. When I push the TUNE button it starts transmitting. After 15 seconds the K3 momentarily stops transmitting for about a millisecond, again at 30 seconds, again at 45 seconds, and again at 60 seconds and so on. The same result in both CW and DATA modes. If I reduce the power to under 12 watts, the K3 transmits continually. Has anyone experienced or duplicated this characteristic with their K3? Thanks/73, Frank N7FN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 Momentary no transmit
I discovered a problem with my K3, s/n 83xx. With nothing but power and a dummy load connected to the K3, while in TUNE on 10 meters, PWR adjusted to 15 watts, the K3 momentarily stops transmitting every 15 seconds. When I push the TUNE button it starts transmitting. After 15 seconds the K3 momentarily stops transmitting for about a millisecond, again at 30 seconds, again at 45 seconds, and again at 60 seconds and so on. The same result in both CW and DATA modes. If I reduce the power to under 12 watts, the K3 transmits continually. Has anyone experienced or duplicated this characteristic with their K3? Thanks/73, Frank N7FN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Momentary no transmit
Likewise, when running my amp, when the K3/K3S output drops, the amp gives out a big grunt and this happens every 15 seconds. Rather annoying to say the least and it made me wonder, until it was disclosed as to why, what was going wrong with the amp. 73 Bob, K4TAX On 11/22/2015 9:37 PM, Jim - N4ST wrote: This drove me nuts when I first got my K3S. After a few days of testing and reconfigurations, it turned out to be a firmware problem that has existed for years. You will never notice it in SSB modes and the dropout occurs in the spaces for CW. A definite annoyance for those of us using digital modes with transmit times longer than 15 seconds. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com