[Elecraft] K3 No ATU and 12w max

2010-02-06 Thread cx7tt
This morning I turned on K3 #250 and got a ERR AT3 msg which was strange 
as when I shut down the radio yesterday, everything was fine. I rarely 
use the ATU as I have a Steppir beam and inverted L which I run thru an 
external tuner.
I started troubleshooting and went thru the following sequences:
After seeing the ERR AT3, I check the config, it was in BYP.
ATU Tune- No ATU
Config-ATU to auto
ATU Tune-No ATU
Power-OFF/ON
No msg this time
ATU tune- ERR LPF
ATU tune-ERR IO3
ATU tune-ERR IF1
ATU tune-ERR xv3
ATU tune-AT3
ATU tune-ERR PA1
ATU tine- ERR BP3

Xmit/Tune- 12 w max (KPA100 installed)
SWR shows 1.8 on K3 display, LP Pan shows 10.6w and SWR of 1.15 (on 
exact Steppir freq of 14.050)
Same with ATU in BYP or Auto
KPA3 in nor

Any ideas/suggestions
73
Tom
CX7TT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


Re: [Elecraft] K3 No ATU and 12w max

2010-02-06 Thread David Y.
Tom and All,

Sounds familiar!  Your K3 serial number is low enough to be one that may be 
affected (mine is #96) by a problem that is fairly easily corrected. 
There's a cap that needs to be removed (if it hasn't been already, and 
another small cap that needs to be added.  I see you have copied Gary 
Surrency, and he will undoubtedly supply you with the complete details (if I 
am right about the issue).

If this happens again in the meantime, try this--disconnect the K3 from all 
power, and let it sit for a while.  It may have to remain disconnected for a 
while.  Chances are that this will temporarily restore your ATU.  Sometimes 
I had to wait 30 minutes to an hour before this worked.  After I made the 
mod, the problem has not returned, so I think it is solved.

Since it is the weekend, you might not hear from Gary until Monday.  I can 
send you the info he sent me, but I'm assuming it's the same problem.  The 
cap that needs to be removed is C19, and the cap that needs to be added is 
an SMT cap (300 pf I think).  You just tack it across two pins on an IC.

Let me know if you need the info.

Dave W7AQK


- Original Message - 
From: cx...@4email.net
To: elecraft@mailman.qth.net; Gary Surrency supp...@elecraft.com
Sent: Saturday, February 06, 2010 3:17 AM
Subject: [Elecraft] K3 No ATU and 12w max


 This morning I turned on K3 #250 and got a ERR AT3 msg which was strange
 as when I shut down the radio yesterday, everything was fine. I rarely
 use the ATU as I have a Steppir beam and inverted L which I run thru an
 external tuner.
 I started troubleshooting and went thru the following sequences:
 After seeing the ERR AT3, I check the config, it was in BYP.
 ATU Tune- No ATU
 Config-ATU to auto
 ATU Tune-No ATU
 Power-OFF/ON
 No msg this time
 ATU tune- ERR LPF
 ATU tune-ERR IO3
 ATU tune-ERR IF1
 ATU tune-ERR xv3
 ATU tune-AT3
 ATU tune-ERR PA1
 ATU tine- ERR BP3

 Xmit/Tune- 12 w max (KPA100 installed)
 SWR shows 1.8 on K3 display, LP Pan shows 10.6w and SWR of 1.15 (on
 exact Steppir freq of 14.050)
 Same with ATU in BYP or Auto
 KPA3 in nor

 Any ideas/suggestions
 73
 Tom
 CX7TT
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html