Re: [Elecraft] K3 TXEQ
Arie Kleingeld PA3A-2 wrote: I wouldn't tailor anything with such cartridges. The HC4 and 5 are carefully tailored already by Heil. That's one of the reasons why people by them. But Heil themselves state: To achieve maximum audio quality it is important to adjust the DSP settings of your transmitter when using Heil microphones. ( http://www.heilsound.com/amateur/settings/index.htm ) - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://n2.nabble.com/K3-TXEQ-tp4236984p4239301.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 TXEQ
I am using a Heil Gold Line microphone with a HC4 a HC5 cartridge. Does anybody have TX EQ setting that they have used with these mic cartridges. I know that EQ needs to be tailored for one's actual voice. Bob WB8DDI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 TXEQ
Well, I wouldn't tailor anything with such cartridges. The HC4 and 5 are carefully tailored already by Heil. That's one of the reasons why people by them. 73 and HNY Arie PA3A -Oorspronkelijk bericht- Onderwerp: [Elecraft] K3 TXEQ I am using a Heil Gold Line microphone with a HC4 a HC5 cartridge. Does anybody have TX EQ setting that they have used with these mic cartridges. I know that EQ needs to be tailored for one's actual voice. Bob WB8DDI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 TXEQ
This was explained to me recently by an audio engineer. We don't want to waste energy transmitting sounds below about 300Hz. It's ALL wasted energy and it conveys no intelligibility. There's a lot of trash below 300Hz, room noise, fan noise and breath pops etc. The recommendation is to set the first two TX EQ octave bands (50Hz and 100Hz) for maximum cut @ -16dB and set all the other bands flat @ 0dB. It works FB for me. The reports are good. Ralph K1ZZI Date: Thu, 31 Dec 2009 11:43:18 -0500 From: Bob Wehking rwehk...@cinci.rr.com Subject: [Elecraft] K3 TXEQ I am using a Heil Gold Line microphone with a HC4 a HC5 cartridge. Does anybody have TX EQ setting that they have used with these mic cartridges. I know that EQ needs to be tailored for one's actual voice. Bob WB8DDI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 TxEQ - frequencies and setting
From K3 FAQ´s: -- What are the band ranges in terms of AF frequency? The bands are centered at 200, 400, 600, 800, 1200, 1600, 2400, and 3200 Hz. We can easily change these if something else turns out to make sense. Also note that TX EQ will be adjustable while in TX mode. -- Mentioned possibilty of easy change of freq is very good message as it can be done sometime in futute better fitted for some typical data modes. (WSJT mentioned and surely some others) Thanks Elecraft ;-) 73! Lexa, ok1dst K3/10 #727 Lyle Johnson napsal(a): Surely there is need for TxEQ - for example with WSJT mode to compensate different levels from souncard and possible filter influence for all tones to set equal power-out. The TxEQ adjustment frequencies are set for voice operation. They are the same setpoints as used in the W2IHY 8-band EQ. They are probably not in the right places to compensate for whatever ripple might be in the subsequent crystal filters in the Tx Path. Also, such compensation would change with USB/LSB operation, and is not easily observable by the operator of the Tx, so might not be straightforward to set properly. Any mode that is designed for robust, or weak signal, HF data operation should have allowance for slight amplitude and phase variations, since that is a normal part of HF signal propagation. I do not remember if TxEQ settings is stored via mode or not. They are not, nor are Rx EQ settings, at present. 73, Lyle KK7P ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
