[Elecraft] K3 For Sale (loaded)

[bemeier]

For Sale –  

 

Original owner / non-smoking environment

 

K3 s/n 1193 was just replaced with K4D # 1285

 

Includes:

 

*   KPA3 - 100w internal amp
*   KIO3 (Remote I/O rev C) – Serial CAT communications, digital I/O
control, audio I/O for use with sound cards, dual speaker and headphone
jacks, Aux connector
*   KXV3 – RF I/O, RX antenna, XVTR connections, IF out
*   KAT3 – ATU, AUX antenna input
*   KRX3 – Sub Receiver  (able to fully use Diversity RX)
*   KSYN3A (K3S) upgraded synthesizers in both main and sub
*   Roofing Filters

*   Main:  2.7khz, 400hz, 250hz
*   Sub: 2.7khz, 400hz

*   The following modifications / enhancements have also been installed

*   Front panel Microphone Circuit Modification 
*   KI03 rev C upgrade (see above) – K3IOBUFFKT
*   12VDC OUT current mod – KPA3 12V Sense Mod
*   K3 VFO Tuning Noise Reduction
*   IF Output Buffer Gain Modification
*   DSP upgrade
*   Audio Output Chip Protection Mod – K3 AF Output Mod Kit
*   AF Stage Upgrade – Line Out and Speaker Amp
*   CW Keying rise time mod – CWRTMDKT
*   KRX3 Subout connector – not installed / not needed but info and
parts supplied
*   KPA3 Power Connector Replacement - Gold Pin mod

*   All K3 and Option manuals as well as modification documentation
*   (4) Spare set of knobs for AF gain / RF gain
*   Spare B VFO tuning knob
*   Spare SO-239 with attached plug (plugs into KAT3)
*   Spare KI03 Main Rev C with (1) KI03 Remote Module rev B and (1) KI03
Remote Module rev XD (all working, just removed due to upgrade.

 

OTHER:

*   Small top cover scratche by middle rear screw about ¼” long.
*   Slight crack in VFO B knob – repaired by Elecraft when in California
for Gold Pin mod. (does not impact operation)

*   NOTE:  A spare knob will be supplied (also slight crack and also
repaired by Elecraft)

*   Latest revision firmware installed (MCU = 5.67, FPF = 1.26, DSP1 =
2.88, DSP2 = 2.88)
*   Pictures available on request

 

Asking $2500.00 - - Includes insured UPS ground shipping to CONUS
destinations. ($2400.00 if shipping not required)

 

 

73,

Bruce – N1LN

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 for sale

[bhtoub]

My Elecraft K3 #5024 kit assembled is for sale.
It includes the following configurations/ K3s updates:
KPA3A 100W output
KTCX03-1 TCXO .5ppm
KBPF3A General coverage RX module
KDVR3 Digital Voice Recorder
KSYN3A Synthesizer
KXV3A Interface option
KIO3B Interface option
KBPF3 MDKT 100-400Hz 
KF3LA 8 pole roofing filters:
6Khz AM bandwidth
13Khz-FM bandwidth
2.7Khz SSB bandwidth
250Hz CW bandwidth
KRX3 Sub Receiver
KYSN3A Synthesizer
KF3LA 8 pole roofing filter:
2.7Khz SSB bandwidth
PR6-10 6Mtr/10Mtr preamp
Radio was sent to Elecraft for gold pin update and test performance.
It has the latest firmware 5.67 downloaded from utility.
All modes work perfectly. I've been using it mainly for SSB, FT8, and
some CW.
This radio is being sold as is. Pictures are available upon request. No
optional breakups
Asking 1800.00 plus shipping. Sorry no Pay Pal. Will accept money order
certified check, or personal check (must be cleared by my bank prior to 
shipping). If interested contact me, Brian K1DIH via E-Mail
bht...@juno.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] [K3] For sale: 73CNC weighted VFO A & B knobs

[James Hooper via Elecraft]

Sold.  

Sent from my iPhone

On Dec 17, 2022, at 4:58 PM, JK Hooper  wrote:


For sale:  set of VFO A and B knobs for the K3, photo on my Dropbox, link 
below.   Minor cosmetic dimples are visible in the photo.   

https://www.dropbox.com/s/9nu35zxz50kapu8/K9QJS_73CNC_K3_VFO_knobs%20-%201.jpeg?dl=0
 

$110 OBO including shipping to US locations.  

Reply offline or send text.   

73
Hoop
K9QJS 

Text  360-317-5286


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3+ For Sale

[Richard Lawn]

I have a K3+ (serial # 593) in excellent condition for sale with a number
of the upgrades including the following:
KXV3B-F
KBPF3A
KFL3B-FM-IR-F
KTCX03-l-F
KI03BUPKT-F
About the only thing not upgraded was the synthesizer.
This is the 100 watt version and it has the auto tuner. It's in excellent
shape and was tweaked at the factory in 2017.
Also includes manuals, original mic, and an LP-Pan2 if desired. The only
thing I don't seem to have is the original box.
$1500 shipped to anywhere in continental US
$1650 with the LP-Pan2
Photos available on request.
I will accept a bank check, personal check (with time to clear) and paypal
with the 3% added to the sale price.
73
Rick, W2JAZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 for sale

[Mike Goldstein]

Elecraft K3 HF transceiver 100W, serial #2284, factory built in 2008.
Transceiver still in basic original configuration
Includes ATU, General Coverage Module, and sub-receiver
Includes Ant/IF out/Xverter interface
Includes Elecraft P3 Panadaptor, purchased 2013
Includes Heil Pro combo headset and boom microphone
Includes PR-6 low noise 6M preamplifier
Includes all cables, and manuals (3) and diskette full of info files 
I have collected

and/or written during my ownership.

Main receiver filters all 8 pole, 2.8K, 1.8K, 400 Hz, 200 Hz
Sub receiver has original 2.7K filter, one 8 pole 400 Hz filter

Radio is still in daily use at VE3GFN, in a non-smoking environment. 
See photos on my QRZ page. Rig has only been used for CW, and a small 
amount of SSB.


I want to buy a second IC7610 transceiver.

Come and see it in use

I will deliver (prepaid!) within 100 Miles of my QTH.



--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K3 For Sale

[Greg Mitchell]

Forgot to mention it has an ATU as well.

--- Original Message ---
On Sunday, January 30th, 2022 at 2:32 AM, Greg Mitchell  wrote:

> My K3 is for sale (I'm now the proud owner of a K4). Rig works great. It's a 
> 100W model, with the KSYN3A synthesizer upgrade (K3S) and the KIO3B USB 
> CAT/Soundcard (also from the K3S). It has the KXV3A transverter module as 
> well as 5 filters: 2.7khz, 2.4khz, 500hz, 400hz and 250hz. Sale is for the 
> radio and manual only (printed in a 3-ring binder). No mic or power cable. 
> Asking $2100, and I'll ship it anywhere in the lower-48 - if elsewhere, email 
> me for shipping quote. s/n is 5874.
>
> Thanks and 73,
> Greg KB1AWM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 For Sale

[Greg Mitchell]

My K3 is for sale (I'm now the proud owner of a K4). Rig works great. It's a 
100W model, with the KSYN3A synthesizer upgrade (K3S) and the KIO3B USB 
CAT/Soundcard (also from the K3S). It has the KXV3A transverter module as well 
as 5 filters: 2.7khz, 2.4khz, 500hz, 400hz and 250hz. Sale is for the radio and 
manual only (printed in a 3-ring binder). No mic or power cable. Asking $2100, 
and I'll ship it anywhere in the lower-48 - if elsewhere, email me for shipping 
quote. s/n is 5874.

Thanks and 73,
Greg KB1AWM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K3 for sale

[john]

Or you can contact them, off list:
http://mailman.qth.net/pipermail/elecraft/2021-March/283882.html

John KK9A


Dave Cole NK7Z wrote:

Hi,

Someone had a K3 for sale here recently, could you contact me off list 
please.

-- 
73, and thanks,
Dave (NK7Z)

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 for sale

[Dave Cole]

Hi,

Someone had a K3 for sale here recently, could you contact me off list 
please.


--
73, and thanks,
Dave (NK7Z)

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 for sale

[Doug Eaton via Elecraft]

Hi, I have a K3 for sale, serial# 82XX. In excellent condition;pictures upon 
request. Original owner and non-smoking home.Includes all of the original 
manuals and accessories. Alsocomes with the following upgrades/accessories:KPA3 
100W power amp, KFL3A-250 250Hz 8 Pole filter,KFL3A-2.7kHz filter, KFL3A-6kHz 8 
Pole filter,KSYN3A Synthesizer upgrade kit, KIO3BUPKT I/O upgrade,KXV3A RX 
Antenna, IF Out and transverter interface,KBPF3 General Coverage RX Module, 
KDVR3 DigitalVoice Recorder, NEOGRIP soft tuning knob ring.$1795 plus $35 
shipping. Please contact n...@yahoo.com  
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 for sale

[jeff martin via Elecraft]

I have my K3 for sale. Used about 5 hours after build, for test and 
calibration. Have all the manuals etc. K3-100KAT3KBPF3KFL3-400KXV3A
Perfect condition.$1500.00
Contact me offlist at:jmartin...@hushmail.com
Thanks,N7KRTJeff Martin
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 for sale.

[Steve Hall]

I am selling my K3/100 serial 8133.  One owner, non smoking, never taken
portable.
Contains Elecraft autotuner.   Comes with manual and power cable.  This K3
went through the Elecraft migration program where it was calibrated and
certified as to specifications.  Not a scratch.  $1400 plus shipping and
insurance.  Pick up in GA is OK.
99sun...@gmail.com  Steve Hall WM6P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 For Sale (New Price!)

[ockmrzr]

FOR SALE:

 

Elecraft K3/100-F

Includes:

-KRX3 Sub-Receiver

-KSYN3A Synthesizer Board upgrade (main & sub RX)

-KAT3A 100W Automatic Antenna Tuner

-KXV3B Transverter upgrade

-KIO3B Interface upgrade

-Filters (main RX)

* KFLA3A-2.8-IR, 2.8 kHz SSB

*KFLA3A-1.0-IR, 1.0 kHz CW/DATA

*KFLA3C-400, 400 Hz CW/DATA

*KFLA3A-250-IR, 250Hz 8 Pole CW/DATA

-Filters (sub RX)

*KFLA3A-1.0-IR, 1.0 kHz CW/DATA

 

Total Package New: $5479.94.

**Photos Available

 

This is essentially a K3s!  This is a great rig for Chasing DX or
Contesting.

 

Asking $2850.00 - shipped CONUS

This price will cover shipping and PayPal fees (if used); will ship in
original Elecraft Box

 

I accept PayPal or Money Order

 

Email me directly at: ockm...@gmail.com <mailto:ockm...@gmail.net> 

 

73 de Bruce, N7TY

Yuma, AZ

www.qsl.net/n7ty <http://www.qsl.net/n7ty> 

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 For Sale (Upgraded!)

[ockmrzr]

FOR SALE:

 

Elecraft K3/100-F

Includes:

-KRX3 Sub-Receiver

-KSYN3A Synthesizer Board upgrade (main & sub RX)

-KAT3A 100W Automatic Antenna Tuner

-KXV3B Transverter upgrade

-KIO3B Interface upgrade

-Filters (main RX)

* KFLA3A-2.8-IR, 2.8 kHz SSB

*KFLA3A-1.0-IR, 1.0 kHz CW/DATA

*KFLA3C-400, 400 Hz CW/DATA

*KFLA3A-250-IR, 250Hz 8 Pole CW/DATA

-Filters (sub RX)

*KFLA3A-1.0-IR, 1.0 kHz CW/DATA

 

Total Package New: $5479.94.

**Photos Available

 

This is essentially a K3s!  This is a great rig for Chasing DX or
Contesting.

 

Asking $3250.00 - shipped CONUS

This price will cover shipping and PayPal fees (if used); will ship in
original Elecraft Box

 

I accept PayPal or Money Order

 

Email me directly at: ockm...@gmail.com <mailto:ockm...@gmail.net> 

 

73 de Bruce, N7TY

Yuma, AZ

www.qsl.net/n7ty <http://www.qsl.net/n7ty> 

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 For Sale (Upgraded!)

[ockmrzr]

FOR SALE:

 

Elecraft K3/100-F

-KRX3 Sub-Receiver

-KSYN3A Synthesizer Board upgrade (main & sub RX)

-KAT3A 100W Automatic Antenna Tuner

-KXV3B Transverter upgrade

-KIO3B Interface upgrade

-Filters (main RX)

* KFLA3A-2.8-IR, 2.8 kHz SSB

*KFLA3A-1.0-IR, 1.0 kHz CW/DATA

*KFLA3C-400, 400 Hz CW/DATA

*KFLA3A-250-IR, 250Hz 8 Pole CW/DATA

-Filters (sub RX)

*KFLA3A-1.0-IR, 1.0 kHz CW/DATA

 

Total Package New: $5479.94.

**Photos Available

 

This is essentially a K3s!  This is a great rig for Chasing DX or
Contesting.

 

Asking $3250.00 - shipped CONUS

This price will cover shipping and PayPal fees (if used); will ship in
original Elecraft Box

 

I accept PayPal or Money Order

 

Email me directly at: ockm...@gmail.com <mailto:ockm...@gmail.net> 

 

73 de Bruce, N7TY

Yuma, AZ

www.qsl.net/n7ty <http://www.qsl.net/n7ty> 

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Elecraft K3 for sale ...

[Oliver Dröse]

For sale in Germany (preferably) or Europe:

K3/100-F #8232    Factory Assembled, including:
KRX3    Sub RX module
KFL3A-2.7k    2.7 kHz Roofing Filter in Main RX
KFL3A-2.7k    2.7 kHz Roofing Filter in Sub RX (matched to main RX)
KFL3A-500    500 Hz Roofing Filter in Main RX
KFL3A-500    500 Hz Roofing Filter in Sub RX (matched to main RX)
KFL3B-FM    15 kHz AM/FM b/w Roofing Filter in Main RX
KXV3A    RX Ant / IF Out / Transverter Interface Board
K144XV    144-148 MHz 10 W Internal Transverter Modul Transverter
K144RFLK    Reflock-Board for Internal 2 m Transverter

Package & postage within Germany to be paid by me. To be negotiated for 
sale in Europe.


Highest bid wins. ;-)

73, Olli - DH8BQA

--

Contest, DX & radio projects: https://www.dh8bqa.de/


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 for sale

[Tony Estep]

Hi folks,
I have the following goodies for sale.
This radio has made thousands of DX contacts, but I am assured that it
still has many more left in it.

K3/100-F Serial number 4905
KAT3-FATU
KBPF3 General Coverage RX Module
KFL3A-400  400 Hz, 8 pole filter (also contains standard 2.8 filter)
KRX3-F2nd RX
KUSB  Univ. Ser Bus Adapt.
ProSet Heil Boom Headset
KXV3A RX Ant, IF Out & Xvrtr Int
plus an LP-PAN, which allows you to run NaP3 and/or CW Skimmer

$1950, I pay shipping in US 48 states.

Sorry, I set previous message unsigned.

73,
Tony KT0NY
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 for sale

[Tony Estep]

Hi folks,
I have the following goodies for sale.
This radio has made thousands of DX contacts, but I am assured that it
still has many more left in it.

K3/100-F Serial number 4905
KAT3-FATU
KBPF3 General Coverage RX Module
KFL3A-400  400 Hz, 8 pole filter (also contains standard 2.8 filter)
KRX3-F2nd RX
KUSB  Univ. Ser Bus Adapt.
ProSet Heil Boom Headset
KXV3A RX Ant, IF Out & Xvrtr Int
plus an LP-PAN, which allows you to run NaP3 and/or CW Skimmer

$1950, I pay shipping in US 48 states.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 For Sale

[Howard Stephenson]

Selling my K3/100 SN 6010, comes with ATU, SUB, DVR, and a KBPF3 in main.
Has been upgraded with KIO3B, KSYN3A's
Comes with 13, 2.8, 2.1, .400, .200 filters in main with 2.7 and .400
filters
in SUB.  Included USB and power cable, MH2,  and KE7X book.
Asking $2,200 shipped in the lower 48

Howard Stephenson K6IA
Las Vegas, NV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K3 For Sale

[Robert Brock]

My K3 has been sold.  Thanks to those responding.  HNY.



--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 For Sale

[Frank Krozel]

Offering my extra K3 for sale.

Auto-tuner
Sub Receiver
Filters in main receiver are  2.7kHz, 0.5kHz, 0.2kHz

Filters in Sub receiver are  2.7kHz, 0.5kHz, 0.2kHz

(Elecraft supplied) Config file for this specific K3 included!

Manual, microphone, power cord, box

$2,000 


Off-line inquires please.


-73-  FrankKG9H
kg9hfr...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 For Sale

[Robert Brock]

For Sale is my Elecraft K3 Transceiver S/N 5089.  Am the original owner and
the radio is in excellent condition both cosmetically and electrically.  It
has the current firmware upgrade K3 MCU 5.67 / DSP 2.88 / FPF 1.26, dated
1-22-2019.  This radio has only been used in my heated/air conditioned home
as my station radio.  Original purchase and upgrades have been done by
Elecraft.  Radio can be seen on my QRZ.com page or photos can be sent on
request.

K3/100-F Transceiver Factory Assembled
KAT3-F Automatic Tuning Unit 
KXV3A RX Ant., IF Out and Xverter Interface
KFL3A-200 200 Hz. 5 pole Filter
KFL3A-400 400 Hz. 8 Pole Filter
KBPF3 General Coverage RX Module
KDVR3 Digital Voice Recorder
KSYN3A Synthesizer Upgrade (K3S upgrade)
K312VMDKT-F 12VDC Current modification
K3AUDPROTMDKT Upgrade for audio output protection
All pins on boards upgraded by Elecraft to gold pins
Original K3 Factory Manual
Fred Cady KE7X Manual
DC Cable with Anderson Power Poles on both ends

Original cost $3,590.  The radio and all accessories $1800 shipped and
insured.  Please contact me via email at k9osccw at gmail dot com or via
telephone 763-951-2870.



--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 for sale

[Don Minkoff]

I am trying to help a friend, K6BBQ, Rem, sell his K3. Just in time for 
Field Day, a DXpedition or your next contest.


Elecraft K3 Serial # 581.  Purchased in early 2008 as a kit.
Was serviced and updated by Elecraft in November 2013. Has remained in 
box since then meant to be sold and instead was stored away.


Nov 2013 Elecraft wrote, "K3 SN 581 Meets or exceeds all factory 
specifications."

They replaced front panel pins with gold. DSP Upgrade - F plus much more.

K3/100 100W HF/6M Transceiver
KFL3A-2.7-F 2.7 kHz SSB Filter
KAT3A-F 100W Automatic Antenna Tuner
KBPF3 K3 Gen. Coverage RX Module
KFL3A-400Hz  8 pole CW filter
KFL3A-250Hz 8 pole CW filter

Box, manuals, power cord and USB cable included.
The radio is currently up in San Rafael. Asking $1650 and includes 
shipping.


Will take PayPal.
Contact Rem at : 415-250-9203
marin...@gmail.com

Pictures plus the paperwork from Elecraft  available.

Thanks,

--
Don Minkoff
NK6A

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3 for sale

[Jamie WW3S]

S/N 4321

has sub receiver and ATU installed

6 filters

main rx  6 khz AM, 2.7 SSB, 2.1 SSB 500 hz CW

sub rx 2.7 SSB, 500 hz CW

has the new synthesizer boards upgrade in both RX

KXV3B interface/preamp board installed (adds rx port, if out, 
transverter in, 2nd preamp for 12/10/6)


K312MDKT hi current mod

K3IOBUFFKT installed

most other mods installed when the factory installed the upgraded 
synthesizer boards.


great physical condition, few, if any cabinet marks

includes power cord and many of the Fred Cady books (may NOT have the 
mic, if I find it, its included)


2100.00 email me to discuss shipping and payment options (paypal ok, but 
we need to talk about paypal fees)


can deliver to Dayton





__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3 For Sale

[James Meade]

Elecraft K3/100 $2495. S/N 01480. 2008 Kit, 2009 upgrades, 2010 factory  
inspection and firmware upgrade. K3/100; KAT3 ATU Modulator kit; 2  
KFL3A-500 Hz, 5 Pole filters (main/sub); MH2-R Hand Mic; 2 KBPF3A-F  
General Coverage RX Modules (main/sub); KDVR3 Digital Voice Recorder;  
KFL3A-6K-IR 6kHz, 8 pole filter (main); 2 KFL3B-FM-IR FM-bandwidth, 8-pole  
roofing filters  (main/sub); KRX3-K 2nd RX Mod kit; KTCX03-1 TXCO 1ppm f/w  
correction to 0.5ppm; KXV3 Transverter interface. Please contact off  
list.  Good in QRZ.  Jim NO0B

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3 for sale

[Carl]

I have decided to sell one of my K3's. So there is no confusion, it is a 
K3, late 3000 serial number. It is a 100w kit. Options include standard 
2.7k filter, KDVR3 voice recorder, KXV3A interface (RX antenna, IF out 
and Xverter ), KAT3 antenna tuner (adds 2nd antenna input), power cable, 
and a spare KSYN3 board so a second receiver can be added. A new second 
receiver will come with an upgraded Synth board, and both synth boards 
need to be the same. You could add the new board for $280, or use the 
old ones until you wanted to upgrade. It also has the mod to be able to 
power a K-Pod from the front panel jack. Of course, spiral bound manual 
included, along with assembly instruction manual. The radio is in 
excellent like new condition. Hardly a scratch on the case. Lightly used 
and well taken care of, non smoking and pet free home. This would be a 
great starting point for someone looking for a radio to build up as they 
wanted.I'm asking $2000 shipped in the US. I could meet locally, 
(Burlington, Vt. area) and adjust the price.


Please contact off list: AB1DD @ ARRL.net. (adjust the spaces!).

--
Carl
AB1DD
Resistance is futile.
(don't know about reactance, though)

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] [K3] FOR SALE: Elecraft K3-100 s/n 2730

[K2QI]

Nicely configured Elecraft K3/100 (s/n 2730) in very good condition, both
functionally and aesthetically. Comes with sub-receiver and filters. Used in
a non-smoking environment. K3 is configured with the following options:

1. KAT3: ATU
2. KBPF3: General coverage RX module
3. KDVR3: Digital voice recorder
4. 2x KFL3A-500: 500 Hz, 5 pole filter
5. 2x K3FLMATCH: 5 pole filter matching to 40Hz (500 and 2.7k)
6. KRX3: 2nd RX (sub receiver)
7. KTCX03-1: TCXO 1ppm f/w correction to 0.5 ppm
8. KXV3: Transverter interface
9. MH2-R: Handheld microphone

Asking $2750 obo shipped from 18458. If interested please email
k2qi@gmail.com or text 212-844-9842. 



-
--... ...-- -.. . .--- .- -- . ...
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] [K3] FOR SALE: Elecraft K3-100 s/n 2730

[K2QI]

Nicely configured Elecraft K3/100 (s/n 2730) in very good condition, both
functionally and aesthetically. Comes with sub-receiver and filters. Used in
a non-smoking environment. K3 is configured with the following options:

1. KAT3: ATU
2. KBPF3: General coverage RX module
3. KDVR3: Digital voice recorder
4. 2x KFL3A-500: 500 Hz, 5 pole filter
5. 2x K3FLMATCH: 5 pole filter matching to 40Hz (500 and 2.7k)
6. KRX3: 2nd RX (sub receiver)
7. KTCX03-1: TCXO 1ppm f/w correction to 0.5 ppm
8. KXV3: Transverter interface
9. MH2-R: Handheld microphone

Asking $2750 obo shipped from 18458. If interested please email
k2qi@gmail.com or text 212-844-9842.



-
--... ...-- -.. . .--- .- -- . ...
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] [K3] FOR SALE: Elecraft K3/100 s/n 2730

[K2QI]

Fully loaded Elecraft K3/100 in very good condition, both functionally and
aesthetically. K3 is configured with the following options:

1. KAT3: ATU
2. KBPF3: General coverage RX module
3. KDVR3: Digital voice recorder
4. 2x KFL3A-500: 500 Hz, 5 pole filter
5. 2x K3FLMATCH: 5 pole filter matching to 40Hz (500 and 2.7k)
6. KRX3: 2nd RX
7. KTCX03-1: TCXO 1ppm f/w correction to 0.5 ppm
8. KUSB: USB interface
9. KXV3: Transverter interface
10. MH2-R: Handheld microphone

Will include all manuals and assembly guides that came with the unit. 
Asking $3200 or best offer. If interested please email or text 212-844-9842.
Hate to sell but unfortunately need the money.  Can ship to lower 48 but
prefer local pickup.

Also have a working Heathkit SB-220 if interested. Local pickup only. Make
offer.

73,
James K2QI



-
--... ...-- -.. . .--- .- -- . ...
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [K3] For Sale, K3 with new synth and AM/FM filters

[Warren Merkel]

-Correction-

The seller is *not* the original owner.  That was my mistake. The rest 
of the FS information is accurate.  The radio is still available.


Warren Merkel, KD4Z


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] [K3] For Sale, K3 with new synth and AM/FM filters

[Warren Merkel]

Posted on behalf of owner by Warren Merkel, KD4Z.

K3 Serial # 0632
Factory Assembled. Original owner, non-smoker, climate-controlled
environment.

Updated with the current firmware revision.
Includes original, Elecraft bound manuals (construction and operating),
power cable, and optional hand mic.

It has the following options installed:
1.KTCXO-1 TCXO 1 PPM
2.KSYN3A Synthesizer Board (New Synth)
3.KNB3 Noise Blanker Board
4.Battery Cover (is part of the 2nd Receiver kit -- 2nd RX board not
included)
5.KBPF3A General Coverage Filter Board
6.KFL3A-2.7 kHZ Filter
7.KFL3a-6K AM Filter
8.KFL3B FM Filter
9.KXV3B Interface

This radio works extremely well and is cosmetically in excellent condition.
Just purchased a new K3s and no longer need this radio.
It was last used as one of the CW stations at our "All Elecraft" Field Day
and performed flawlessly.


Price is: $2350 Firm.  Sorry, CONUS only.
Price includes shipping.

Please direct inquiries to owner (not me!  John isn't on this reflector
--yet) :

John Norris, N4IHV
jw...@bellsouth.net
(404) 307-5578
Roswell, Georgia
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 for Sale

[Jim Blanca]

I have for sale an Elecraft K3 – F, serial #5946, that has served as my
backup radio.  I am the second owner and it came from and has been in a
non-smoking environment.  It works 100% and appears 9.5 out of 10, as the
LCD Bezel has two cracks in the corner (it came that way from the previous
owner).  I can provide a picture on request.  I have the original boxes and
packaging.



It includes:

K3/100-F 100 Watt

KAT3-F  K3 ATU

KFL3A   2.8 Khz Filter Swap

KFL3A   400 Hz Filter

Power cable Anderson Poles on both ends

Owner’s Manual

Fred Cady – KE7X  “The Elecraft K3 – Design, Configuration, and Operation
Manual”



I am asking $1,800 plus shipping from zip code 44130



73 de Jim – KE8G
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 for sale

[DBB]

Is your K3 still available?

Tnx.



--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 for sale

[Thaire Bryant]

Update on my K3 for sale:  Unit is in excellent condition.  Factory built
and factory upgrades.  Always in non-smoking shack.

Pictures available on request, also on my QRZ page. Includes all manuals and
Elecraft invoices.

 


QTY

COST

Description



K3/100-F

1

1989

K3 Factory built



KAT3-F

1

289

100 watt antenna tuner



KFL3A-2.8K

2

240

K3 2.8kHz 8 pole filter main and sub


KXV3

1

79

K3 transverter interface



KTCXO3-1

1

99

K3 TXCO



KBPF3

1

99

K3 General Coverage receiver



KFL3A-400

2

240

K3 400 Hz 8 pole filter main and sub


KRX3

1

539

K3 2nd receiver



KDVR3

1

99

K3 digital voice 



K144RFLK

1

89.95

K144XV REFLOCK



K3DSPUPGD-F

1

109.95

K3 DSP upgrade



K3STFNR-F

1

19.95

K3 Synthesizer stiffening plate


K312VMDKT-F

1

8

k3 12 volt AC current mod kit



KXV3A-UPGD-F

1

69.95

KXV3 upgrade



K144XV-100-K

1

299.95

2 meter module for K3



KFL3B-FM

2

250

FM bandwidth 8 pole roofing filter


KFL3A-6K

2

250

K3 6kHz 8 pole filter main and sub


Total new:

4770.75



K/3/100 with all

2200

Plus shipping and ins. Cont. US only



Thanks for the band width! 

73,

Thaire  W2APF

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 for sale

[Thaire Bryant]

I am listing for sale my loaded K3/100-F.

Inc: KA3-F, KFL3A-2.8(2), KXV3, KTCXO3-1, KBPF3,KFL3A-6K(2), KFL3-FM(2),
KFL3A-400(2), KRX3, KDVR3, K144RFLK, K3DSPUPGD-F, K3TFNR-F, K312VMDKT-F,
KXV3A-UPGD-F,K144XV-100-K

Firmware:5.60  Elecraft factory upgrades

Pictures on request.

Asking $2,500 plus shipping and ins.

 

Thaire  W2APF

 

H: 603-447-2376

C: 508-245-3522

Skype: camp.comfort

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Navigator Sound Card for Elecraft K3 - For Sale

[Robert Nobis]

I no longer need my Navigator Sound Card as I have upgraded my K3 with the 
internal sound card and USB Interface.

Timewave Navigator with Master Control Cable for Elecraft K3. Serial number 
63687. Includes Navigator, K3 Cable, Manual, and CD with Software.

Priced at $295.00, includes shipment via USPS Priority Mail to US Lower 48 
states only. Payment by PayPal only.  

Send offers by email to N7RJN at NOBIS.NET


73,

Bob 



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 for sale

[Randy van Vliet]

Is your K3 still for sale?

Regards,

Randy van Vliet W6RLV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For sale

[Joe Hoffman]

UPDATE:  My K3 will likely be done this week so if you would like to get it 
fresh from the factory make an offer.  Info below:

My beloved K3 is on it's way to the mother ship in Watsonville to migrate a few 
things to my new K3S.  Once that is done I would like to sell it and perhaps 
even have it shipped to a new home directly from Elecraft if payment is made 
prior to it leaving Watsonville.

Here is what I have for sale then:

K3 S/N 1713 with the 100W module, the KAT3 ATU and the KXV3 transverter module.

If you are not familiar with the migration process note that any needed repairs 
(which I do not expect) to bring the K3 up to factory specs would be charged to 
me.  Shipping from Elecraft will also be charged to me.

My K3 is in excellent operational and cosmetic condition with nary a scratch on 
it.

I would like $1750 for it shipped to your door.

73,

Joe, W8JH


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 for sale

[Joe Hoffman]

My beloved K3 is on it's way to the mother ship in Watsonville to migrate a few 
things to my new K3S.  Once that is done I would like to sell it and perhaps 
even have it shipped to a new home directly from Elecraft if payment is made 
prior to it leaving Watsonville.

Here is what I have for sale then:

K3 S/N 1713 with the 100W module, the KAT3 ATU and the KXV3 transverter module.

If you are not familiar with the migration process note that any needed repairs 
(which I do not expect) would be charged to me.  Shipping from Elecraft will 
also be charged to me.

My K3 is in excellent operational and cosmetic condition with nary a scratch on 
it.

I would like $1750 for it shipped to your door.

73,

Joe, W8JH

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] [K3] For Sale: PR6-10 & 500 Hz Filter

[John Reilly]

PR6-10 Low Noise, 6m thru 10m preamp, includes power cable, two M/M BNC 
adapters, and spare amplifier and diode parts: $90

500 Hz, 5-pole filter: $60
  - John, N0TA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 for Sale

[Jim Vohland]

I’ve like  to try something new for awhile and decided to sell my K3. Serial 
number #4354 and has the following options:
KPA3 100, KAT3 internal tuner, KDVR3 recorder, KFL3A 2.7 filter, KFL3A 6k 
filter, KIO3B board, power cable, Owners Manual and Assembly Manual and a bound 
copy of the owners manual.

Rig was back to Elecraft and checkup and had the gold pin updates. Also had the 
updated vfo know grip.  Clean bill of health and it works like it should. No 
issues at all and looks great. Giving first shot to the reflector before going 
on qth.

$2000 shipped to US only.

Sent from Mail for Windows 10

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Elecraft K3 For Sale

[Carl Jón Denbow]

SOLD! 

-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Carl Jón 
Denbow
Sent: Friday, April 14, 2017 4:55 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Elecraft K3 For Sale

PRICE REDUCED:

I have many Elecraft products, including a K3s, so I find the following excess 
to my needs and, therefore, on the sale block.
Elecraft K3-100, SN: 0676, upgraded to many of features of the K3s. Contains 
filters -- KFL3A-250, KFL3A-6K, AND KFL3A-2.8K, is in good condition and fully 
functional. When I bought this rig both side panels were heavily scratched. I 
replaced the panels as well as most screws with stainless steel screws, and the 
rig is now a 9 out 10 cosmetically. Rig was back at the factory last November 
(11/17/2016 invoice date) and at that time was upgraded with KIO3B, KXV3B, and 
KSYN3A and the previously mentioned 2.8 filter. Also a number of updates were 
performed at that time so that when it left factory it was certified to "meet 
or exceed all factory specifications." [Cost of upgrades: $1,343.55.] In 
addition to the above, sold with following extra features:
KAT3A Auto Tuner
KPA100 100 watt amplifier module
KFL3A-250Hz KDVR
Your Price: $2,400, shipped your CONUS QTH.

Sent from my iPhone
===
Carl Jón Denbow, N8VZ
17 Coventry Lane
Athens, Ohio 45701-3718

c...@n8vz.com
www.n8vz.com
EM89wh

IRLP 4533   Echolink 116070

PSK and JT65 Forever!
===
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to c...@n8vz.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 for sale

[Paul VanOveren]

Very nice Elecraft K3 for sale.  SN   #758
Included options are
KPA 100, 100 watt module
KT3A Internal antenna tuner w/2nd SO239 input
KIO3, digital interface
KRX3 second receiver module
KXV3 Receive antenna interface option
K3DVR Digital Voice Recorder
K3FLA  250 hz CW filters 8 pole matching (2)
K3FLA  500 hz CW filters 5 pole matching (2)
K3FLA  2.7 hz  SSB filter standard option  (2)
All manuals, power cord, Fred Cady book
Cosmetically 9/10, non smoking environment, I am original owner, DSP boards
upgraded
and 15 hardware mods done at factory in 2012.  Pictures available, email me
at
pauln...@gmail.com or phone 616  868-7149
Shipped insured, double boxed, CONUS$2500.00
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Elecraft K3 For Sale

[Carl Jón Denbow]

PRICE REDUCED:

I have many Elecraft products, including a K3s, so I find the following excess 
to my needs and, therefore, on the sale block.
Elecraft K3-100, SN: 0676, upgraded to many of features of the K3s. Contains 
filters -- KFL3A-250, KFL3A-6K, AND KFL3A-2.8K, is in good condition and fully 
functional. When I bought this rig both side panels were heavily scratched. I 
replaced the panels as well as most screws with stainless steel screws, and the 
rig is now a 9 out 10 cosmetically. Rig was back at the factory last November 
(11/17/2016 invoice date) and at that time was upgraded with KIO3B, KXV3B, and 
KSYN3A and the previously mentioned 2.8 filter. Also a number of updates were 
performed at that time so that when it left factory it was certified to "meet 
or exceed all factory specifications." [Cost of upgrades: $1,343.55.] 
In addition to the above, sold with following extra features:
KAT3A Auto Tuner
KPA100 100 watt amplifier module
KFL3A-250Hz KDVR 
Your Price: $2,400, shipped your CONUS QTH.

Sent from my iPhone
===
Carl Jón Denbow, N8VZ
17 Coventry Lane
Athens, Ohio 45701-3718

c...@n8vz.com
www.n8vz.com
EM89wh

IRLP 4533   Echolink 116070

PSK and JT65 Forever!
===
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 for sale

[mark roz via Elecraft]

I have very nice Elecraft K3 for sale. SN 6925 
Price lowered. Now $1695 shipped conus.
 Included options are:
 KPA100- 100W
 KTA3- internal antenna tuner
 KFL3A- 250 CW filter
 KFL3A- 2.8 SSB filter
 KIO3
 KXV3
 Manual
 Power cord
 Radio is in great shape cosmetically and operationally.
 It would be 9.9 out of 10 but it has
 one scratch on the top.
 Pictures available. I’m the original
 owner and my main radio is FTDX500.
 If interested, please email me to
 address at QRZ com and I will provide my
 phone number.
 Thanks. Mark, WQ7X
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Elecraft K3 For Sale

[Carl Jón Denbow]

Addendum: I might consider a trade for a Flex 6500, plus appropriate cash. -- 
CJD

Sent from my iPhone
===
Carl Jón Denbow, N8VZ
17 Coventry Lane
Athens, Ohio 45701-3718

c...@n8vz.com
www.n8vz.com
EM89wh

IRLP 4533   Echolink 116070

PSK and JT65 Forever!
===


Sent from my iPhone
===
Carl Jón Denbow, N8VZ
17 Coventry Lane
Athens, Ohio 45701-3718

c...@n8vz.com
www.n8vz.com
EM89wh

IRLP 4533   Echolink 116070

PSK and JT65 Forever!
===


Sent from my iPhone
===
Carl Jón Denbow, N8VZ
17 Coventry Lane
Athens, Ohio 45701-3718
 
c...@n8vz.com
www.n8vz.com
EM89wh
 
IRLP 4533   Echolink 116070
 
PSK and JT65 Forever!
===
> On Apr 3, 2017, at 2:45 PM, Carl Jón Denbow <n...@qth.com> wrote:
> 
> REPOSTING UPDATED SALE LISTING:
> 
> I have many Elecraft products, including a K3s, so I find the following 
> excess to my needs and, therefore, on the sale block.
> Elecraft K3-100, SN: 0676, upgraded to many of features of the K3s. Contains 
> filters -- KFL3A-250, KFL3A-6K, AND KFL3A-2.8K, is in good condition and 
> fully functional. When I bought this rig both side panels were heavily 
> scratched. I replaced the panels as well as most screws with stainless steel 
> screws, and the rig is now a 9 out 10 cosmetically. Rig was back at the 
> factory last November (11/17/2016 invoice date) and at that time was upgraded 
> with KIO3B, KXV3B, and KSYN3A and the previously mentioned 2.8 filter. Also a 
> number of updates were performed at that time so that when it left factory it 
> was certified to "meet or exceed all factory specifications." [Cost of 
> upgrades: $1,343.55.] 
> In addition to the above, sold with following extra features:
> KAT3A Auto Tuner
> KPA100 100 watt amplifier module
> KFL3A-250Hz KDVR Digital Recorder 
> Additional photos available upon request.
> Your Price: $2,500, shipped your CONUS QTH.
> 
> Sent from my iPhone
> ===
> Carl Jón Denbow, N8VZ
> 17 Coventry Lane
> Athens, Ohio 45701-3718
> 
> c...@n8vz.com
> www.n8vz.com
> EM89wh
> 
> IRLP 4533   Echolink 116070
> 
> PSK and JT65 Forever!
> ===
> 
>> On Mar 29, 2017, at 9:33 PM, Carl Jón Denbow <n...@qth.com> wrote:
>> 
>> For those who don't care to go to the QTH.com website, here's the text to my 
>> ad:
>> 
>> Elecraft K3 100 Watt HF transceiver SN: 06xx. Contains filters -- KFL3A-250, 
>> KFL3A-6K, AND KFL3A-2.8K, is in good condition and fully functional. When I 
>> bought this rig, both side panels were heavily scratched. I replaced the 
>> panels as well as most screws with stainless steel screws, and the rig is 
>> now a 9 out 10 cosmetically, with only a few very small scratches. Rig was 
>> back at the factory last November (11/17/2016 invoice date) and at that time 
>> was upgraded with KIO3B, KXV3B, and KSYN3A and the previously mentioned 2.8 
>> filter. Also a number of updates were performed at that time so that when it 
>> left factory it was certified to "meet or exceed all factory 
>> specifications." [Cost of upgrades: $1,343.55.] 
>> In addition to the above, sold with following extra features:
>> KAT3A Auto Tuner
>> KPA100 100 watt amplifier module
>> KFL3A-250Hz KDVR Digital Recorder 
>> Additional photos available upon request.
>> Your Price: $2,500, shipped your CONUS QTH.
>> Greatly prefer PayPal for payment.
>> 
>> Sent from my iPhone
>> ===
>> Carl Jón Denbow, N8VZ
>> 17 Coventry Lane
>> Athens, Ohio 45701-3718
>> 
>> c...@n8vz.com
>> www.n8vz.com
>> EM89wh
>> 
>> IRLP 4533   Echolink 116070
>> 
>> PSK and JT65 Forever!
>> ===
>> 
>>> On Mar 22, 2017, at 1:23 AM, Carl Jón Denbow <n...@qth.com> wrote:
>>> 
>>> Gentlemen and Ladies:  I have both a K3 and K3s, as well as a bunch of
>>> other
>>> Elecraft stuff.  However, I’ve decided to sell my K3.  It is an early
>>> serial
>>> number (676) that I bought used, but it has been back to factory a few
>>> months ago for many upgrades and updates.  You can see the details here:
>>> https://swap.qth.com/search-results.php?keywords=n8vz
>>> <https://swap.qth.com/search-results.php?keywords=n8vz=call>
>>> =call
>>> 
>>> 
>>> 
>>> As stated in the QTH.com classified, I greatly prefer payment via PayPal.
>>> Thanks for looking.
>>> 
>>> 
>>> 
>>> 73,
>>> 
>>> 

Re: [Elecraft] Elecraft K3 For Sale

[Carl Jón Denbow]

Addendum: I might consider a trade for a Flex 6500, plus appropriate cash. -- 
CJD

Sent from my iPhone
===
Carl Jón Denbow, N8VZ
17 Coventry Lane
Athens, Ohio 45701-3718
 
c...@n8vz.com
www.n8vz.com
EM89wh
 
IRLP 4533   Echolink 116070
 
PSK and JT65 Forever!
===


Sent from my iPhone
===
Carl Jón Denbow, N8VZ
17 Coventry Lane
Athens, Ohio 45701-3718
 
c...@n8vz.com
www.n8vz.com
EM89wh
 
IRLP 4533   Echolink 116070
 
PSK and JT65 Forever!
===
> On Apr 3, 2017, at 2:45 PM, Carl Jón Denbow <n...@qth.com> wrote:
> 
> REPOSTING UPDATED SALE LISTING:
> 
> I have many Elecraft products, including a K3s, so I find the following 
> excess to my needs and, therefore, on the sale block.
> Elecraft K3-100, SN: 0676, upgraded to many of features of the K3s. Contains 
> filters -- KFL3A-250, KFL3A-6K, AND KFL3A-2.8K, is in good condition and 
> fully functional. When I bought this rig both side panels were heavily 
> scratched. I replaced the panels as well as most screws with stainless steel 
> screws, and the rig is now a 9 out 10 cosmetically. Rig was back at the 
> factory last November (11/17/2016 invoice date) and at that time was upgraded 
> with KIO3B, KXV3B, and KSYN3A and the previously mentioned 2.8 filter. Also a 
> number of updates were performed at that time so that when it left factory it 
> was certified to "meet or exceed all factory specifications." [Cost of 
> upgrades: $1,343.55.] 
> In addition to the above, sold with following extra features:
> KAT3A Auto Tuner
> KPA100 100 watt amplifier module
> KFL3A-250Hz KDVR Digital Recorder 
> Additional photos available upon request.
> Your Price: $2,500, shipped your CONUS QTH.
> 
> Sent from my iPhone
> ===
> Carl Jón Denbow, N8VZ
> 17 Coventry Lane
> Athens, Ohio 45701-3718
> 
> c...@n8vz.com
> www.n8vz.com
> EM89wh
> 
> IRLP 4533   Echolink 116070
> 
> PSK and JT65 Forever!
> ===
> 
>> On Mar 29, 2017, at 9:33 PM, Carl Jón Denbow <n...@qth.com> wrote:
>> 
>> For those who don't care to go to the QTH.com website, here's the text to my 
>> ad:
>> 
>> Elecraft K3 100 Watt HF transceiver SN: 06xx. Contains filters -- KFL3A-250, 
>> KFL3A-6K, AND KFL3A-2.8K, is in good condition and fully functional. When I 
>> bought this rig, both side panels were heavily scratched. I replaced the 
>> panels as well as most screws with stainless steel screws, and the rig is 
>> now a 9 out 10 cosmetically, with only a few very small scratches. Rig was 
>> back at the factory last November (11/17/2016 invoice date) and at that time 
>> was upgraded with KIO3B, KXV3B, and KSYN3A and the previously mentioned 2.8 
>> filter. Also a number of updates were performed at that time so that when it 
>> left factory it was certified to "meet or exceed all factory 
>> specifications." [Cost of upgrades: $1,343.55.] 
>> In addition to the above, sold with following extra features:
>> KAT3A Auto Tuner
>> KPA100 100 watt amplifier module
>> KFL3A-250Hz KDVR Digital Recorder 
>> Additional photos available upon request.
>> Your Price: $2,500, shipped your CONUS QTH.
>> Greatly prefer PayPal for payment.
>> 
>> Sent from my iPhone
>> ===
>> Carl Jón Denbow, N8VZ
>> 17 Coventry Lane
>> Athens, Ohio 45701-3718
>> 
>> c...@n8vz.com
>> www.n8vz.com
>> EM89wh
>> 
>> IRLP 4533   Echolink 116070
>> 
>> PSK and JT65 Forever!
>> ===
>> 
>>> On Mar 22, 2017, at 1:23 AM, Carl Jón Denbow <n...@qth.com> wrote:
>>> 
>>> Gentlemen and Ladies:  I have both a K3 and K3s, as well as a bunch of
>>> other
>>> Elecraft stuff.  However, I’ve decided to sell my K3.  It is an early
>>> serial
>>> number (676) that I bought used, but it has been back to factory a few
>>> months ago for many upgrades and updates.  You can see the details here:
>>> https://swap.qth.com/search-results.php?keywords=n8vz
>>> <https://swap.qth.com/search-results.php?keywords=n8vz=call>
>>> =call
>>> 
>>> 
>>> 
>>> As stated in the QTH.com classified, I greatly prefer payment via PayPal.
>>> Thanks for looking.
>>> 
>>> 
>>> 
>>> 73,
>>> 
>>> 
>>> 
>>> Carl
>>> 
>>> 
>>> 
>>> ==
>>> Carl Jón Denbow, N8V

[Elecraft] Elecraft K3 For Sale

[Carl Jón Denbow]

REPOSTING UPDATED SALE LISTING:

I have many Elecraft products, including a K3s, so I find the following excess 
to my needs and, therefore, on the sale block.
Elecraft K3-100, SN: 0676, upgraded to many of features of the K3s. Contains 
filters -- KFL3A-250, KFL3A-6K, AND KFL3A-2.8K, is in good condition and fully 
functional. When I bought this rig both side panels were heavily scratched. I 
replaced the panels as well as most screws with stainless steel screws, and the 
rig is now a 9 out 10 cosmetically. Rig was back at the factory last November 
(11/17/2016 invoice date) and at that time was upgraded with KIO3B, KXV3B, and 
KSYN3A and the previously mentioned 2.8 filter. Also a number of updates were 
performed at that time so that when it left factory it was certified to "meet 
or exceed all factory specifications." [Cost of upgrades: $1,343.55.] 
In addition to the above, sold with following extra features:
KAT3A Auto Tuner
KPA100 100 watt amplifier module
KFL3A-250Hz KDVR Digital Recorder 
Additional photos available upon request.
Your Price: $2,500, shipped your CONUS QTH.

Sent from my iPhone
===
Carl Jón Denbow, N8VZ
17 Coventry Lane
Athens, Ohio 45701-3718
 
c...@n8vz.com
www.n8vz.com
EM89wh
 
IRLP 4533   Echolink 116070
 
PSK and JT65 Forever!
===

> On Mar 29, 2017, at 9:33 PM, Carl Jón Denbow <n...@qth.com> wrote:
> 
> For those who don't care to go to the QTH.com website, here's the text to my 
> ad:
> 
> Elecraft K3 100 Watt HF transceiver SN: 06xx. Contains filters -- KFL3A-250, 
> KFL3A-6K, AND KFL3A-2.8K, is in good condition and fully functional. When I 
> bought this rig, both side panels were heavily scratched. I replaced the 
> panels as well as most screws with stainless steel screws, and the rig is now 
> a 9 out 10 cosmetically, with only a few very small scratches. Rig was back 
> at the factory last November (11/17/2016 invoice date) and at that time was 
> upgraded with KIO3B, KXV3B, and KSYN3A and the previously mentioned 2.8 
> filter. Also a number of updates were performed at that time so that when it 
> left factory it was certified to "meet or exceed all factory specifications." 
> [Cost of upgrades: $1,343.55.] 
> In addition to the above, sold with following extra features:
> KAT3A Auto Tuner
> KPA100 100 watt amplifier module
> KFL3A-250Hz KDVR Digital Recorder 
> Additional photos available upon request.
> Your Price: $2,500, shipped your CONUS QTH.
> Greatly prefer PayPal for payment.
> 
> Sent from my iPhone
> ===
> Carl Jón Denbow, N8VZ
> 17 Coventry Lane
> Athens, Ohio 45701-3718
> 
> c...@n8vz.com
> www.n8vz.com
> EM89wh
> 
> IRLP 4533   Echolink 116070
> 
> PSK and JT65 Forever!
> ===
> 
>> On Mar 22, 2017, at 1:23 AM, Carl Jón Denbow <n...@qth.com> wrote:
>> 
>> Gentlemen and Ladies:  I have both a K3 and K3s, as well as a bunch of
>> other
>> Elecraft stuff.  However, I’ve decided to sell my K3.  It is an early
>> serial
>> number (676) that I bought used, but it has been back to factory a few
>> months ago for many upgrades and updates.  You can see the details here:
>> https://swap.qth.com/search-results.php?keywords=n8vz
>> <https://swap.qth.com/search-results.php?keywords=n8vz=call>
>> =call
>> 
>> 
>> 
>> As stated in the QTH.com classified, I greatly prefer payment via PayPal.
>> Thanks for looking.
>> 
>> 
>> 
>> 73,
>> 
>> 
>> 
>> Carl
>> 
>> 
>> 
>> ==
>> Carl Jón Denbow, N8VZ
>> 17 Coventry Lane Athens, Ohio 45701-3718
>> c...@n8vz.com <mailto:c...@n8vz.com>
>> www.n8vz.com <http://www.n8vz.com>
>> 
>> EM89wh
>> IRLP 4533 Echolink 116070
>> 
>> PSK and JT65 Forever!
>> ==
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to n...@qth.com
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@qth.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Elecraft K3 For Sale

[Carl Jón Denbow]

For those who don't care to go to the QTH.com website, here's the text to my ad:

Elecraft K3 100 Watt HF transceiver SN: 06xx. Contains filters -- KFL3A-250, 
KFL3A-6K, AND KFL3A-2.8K, is in good condition and fully functional. When I 
bought this rig, both side panels were heavily scratched. I replaced the panels 
as well as most screws with stainless steel screws, and the rig is now a 9 out 
10 cosmetically, with only a few very small scratches. Rig was back at the 
factory last November (11/17/2016 invoice date) and at that time was upgraded 
with KIO3B, KXV3B, and KSYN3A and the previously mentioned 2.8 filter. Also a 
number of updates were performed at that time so that when it left factory it 
was certified to "meet or exceed all factory specifications." [Cost of 
upgrades: $1,343.55.] 
In addition to the above, sold with following extra features:
KAT3A Auto Tuner
KPA100 100 watt amplifier module
KFL3A-250Hz KDVR Digital Recorder 
Additional photos available upon request.
Your Price: $2,500, shipped your CONUS QTH.
Greatly prefer PayPal for payment.

Sent from my iPhone
===
Carl Jón Denbow, N8VZ
17 Coventry Lane
Athens, Ohio 45701-3718
 
c...@n8vz.com
www.n8vz.com
EM89wh
 
IRLP 4533   Echolink 116070
 
PSK and JT65 Forever!
===

> On Mar 22, 2017, at 1:23 AM, Carl Jón Denbow  wrote:
> 
> Gentlemen and Ladies:  I have both a K3 and K3s, as well as a bunch of
> other
> Elecraft stuff.  However, I’ve decided to sell my K3.  It is an early
> serial
> number (676) that I bought used, but it has been back to factory a few
> months ago for many upgrades and updates.  You can see the details here:
> https://swap.qth.com/search-results.php?keywords=n8vz
> 
> =call
> 
> 
> 
> As stated in the QTH.com classified, I greatly prefer payment via PayPal.
> Thanks for looking.
> 
> 
> 
> 73,
> 
> 
> 
> Carl
> 
> 
> 
> ==
> Carl Jón Denbow, N8VZ
> 17 Coventry Lane Athens, Ohio 45701-3718
> c...@n8vz.com 
> www.n8vz.com 
> 
> EM89wh
> IRLP 4533 Echolink 116070
> 
> PSK and JT65 Forever!
> ==
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@qth.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Elecraft K3 For Sale

[Carl Jón Denbow]

Gentlemen and Ladies:  I have both a K3 and K3s, as well as a bunch of other
Elecraft stuff.  However, I’ve decided to sell my K3.  It is an early serial
number (676) that I bought used, but it has been back to factory a few
months ago for many upgrades and updates.  You can see the details here:
https://swap.qth.com/search-results.php?keywords=n8vz

=call

 

As stated in the QTH.com classified, I greatly prefer payment via PayPal.
Thanks for looking.

 

73,

 

Carl

 

== 
Carl Jón Denbow, N8VZ
17 Coventry Lane Athens, Ohio 45701-3718 
c...@n8vz.com   
www.n8vz.com   

EM89wh 
IRLP 4533 Echolink 116070
 
PSK and JT65 Forever! 
==

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3: For Sale: K3S Station

[Robert Dorchuck]

I have the following for sale:
Complete Elecraft K3S Station consisting of a K3S, P3,
KPA500, MFJ998 Tuner and Astron RS50M power supply.
The K3S has the following options:
KRX3 - second receiver
KDVR - digital voice recorder
KPA3 - 100 watt amplifier module
KTCXO3 - .5ppm Reference oscillator
The following filters are installed:
  Main Receiver: 6.0, 2.8, 1.8 and .4
  Sub Receier: 2.8 and 1.8
  All filters are 8 pole.
Serial is 107XX and the IMD Modification was installed by Elecraft
in November and the radio aligned to factory specs. The radio was built
from a kit in July 2015.  The radio does NOT have the antenna tuner.
The P3 was built from a kit in 2013 and has the Transmit Monitor option
with the 2KW coupler installed.
The KPA500 was built from a kit in 2011. Serial is 3XX.
The MFJ998 was purchased in December 2015.
The Astron RS50M is about 8 years old.
The package includes all interconnecting cables and a RigRunner.

Pickup only in Moreno Valley, CA please.
Please contact me off list.
Price is $5200.
Thanks
Bob W6VY
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 for sale

[Frederick Atchley]

Equipped with KPA3 100 Watt amplifier and KAT3 internal tuner. Bristol
condition; issue-free; smoke-free; never mobile. Updated by Elecraft on 17
Oct 16 to include Gold pins and certified to meet or exceed factory
specifications. $1750, includes shipping to lower 48. It was my pride and
joy but I just upgraded to K3s. If interested contact: Fred at ae6ic at
cox.net.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 for sale.

[Bill Johnson]

I have a K3-100 factory built unit.  I am sending into Elecraft to transfer my 
components into a K3s and have all current updates added to the K3.  I will 
include the tuner, gold pin updates and any items that are already in the K3s.  
The 6 meter rf amplifier will also be included.  Unit is clean, no . 
environment.  I will sell and have sent directly from factory to purchasing 
user, who may also wish to add more features installed at the factory.  The K3s 
standard filter will be transferred to the K3. I am looking for $1850 plus 
shipping and PayPal fees.

Bill
K9YEQ

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 for Sale

[l s via Elecraft]

For Sale K3 s/n 27xx with FL13.00kz  ,FL 6.00kz, FL 2.7kz, FL 0.5, kxv3A xtr rx 
i/o boardOwners manual and  Fred Cady KE7X K3 book.LP2-Pan with the Creative 
usb sound card 0202 and the PCI Delta audio 2496 card.Both of these cards work 
very well with windows 7 and 8.1 with Nap3 and Powersdr-IFstage 1.19.3.5. After 
market electret  hand mic and extra cables for computer and sound card etc. If 
interested contact me via my email address -KI6UM  at qrz.com and will supply 
picturesalso.Price $1875 shipped to lower 48.Thanks for reading
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 for sale

[deW9SDX]

K3/100 for sale

 

I am selling my 100 watt K3 with internal antenna tuner and other valuable 
options.  My asking price is $1375.

 

For the complete listing and access to photos of the rig, email me at W9SDX 
at-sign arrl dot net.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 for sale

[Frederick Atchley]

S/n 2241, factory calibrated and aligned. Certified by Elecraft, as of 17
October 2016 that it meets or exceeds all factory specifications. Updated to
include gold pins. Options: KPA3 100W amp and KAT3 internal 100W tuner. Has
the standard 2.7 KHz. Filter.

If you are looking for a superb starter rig, capable of accepting all of
Elecraft' s stable of options, this is it!

$2000. Fred Atchley, AE6IC

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Elecraft K3 For Sale at Discount Price

[pastormg2]

 Elecraft K3 For Sale at Discount Price 

Good Afternoon, 
I am looking to sell my K3. It has the most current firmware and has been used 
in a non-smoking home. 
K3-100 Transceiver, SN# 4805
The K3 has the following accessories!
KXV3A RX Ant, IF Out, Xverter Int. 
KSYN3AUPG Ksyn3a Upgrade Kit 
KVDR3 K3 Digital Voice Recorder 
KFL3A-1.8K-IR 1.8 KHZ 8 Pole Filter 
KFL3A-250-IR 250 Hz 8 Pole Filter 
KFL3A-400-IR 400 Hz 8 Pole Filter 
Total Discount Price $2,000.00
Freight to be paid by buyer.
Extra Notes:
K3 does not have Internal Antenna Tuner
K3 does not have a Secondary Receiver
K3 Internal Speaker does not work, but will work with external speaker.
Headphone jack does work!
Please contact me at pastor...@verizon.net with any additional questions.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale!

[pastormg2]

Good Evening this is Mark Griffin, KB3Z. I would like to put my K3 up for sale. 
Please see below for all the details.

Mark Griffin, KB3Z

 
 

Elecraft K3 System 
 


 
 

Part # Description Selling Price
K3-100 F K3 100 Watt Transceiver, SN# 4805 1650
KXV3A RX Ant, IF Out, Xverter Int. 82.5
KSYN3AUPG Ksyn3a Upgrade Kit 165
KVDR3 K3 Digital Voice Recorder 105
KFL3A-1.8K-IR 1.8 KHZ 8 Pole Filter 82.5
KFL3A-250-IR 250 Hz 8 Pole Filter 105
KFL3A-400-IR 400 Hz 8 Pole Filter 105

 
 

Total 
 2295

 
 


 
 


 
 


 
 


 
 

K3 has the 2.8 KHZ 8 pole filter that came with the radio. 

K3 does not have Internal Antenna Tuner. 

K3 does not have a Secondary Receiver. 

K3 Internal Speaker does not work due to a possible Resistor Fault.
My Email Address is pastor...@verizon.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale

[McClain Richard]

The K3 transceiver for sale is Serial Number 06517 which was purchased in May, 
2012.
It includes the following options:
  -- 100 watt amplifier, internal
  -- 2.8 kHz, 8-pole filter
  -- KXV3A, RX Antenna, IF Out and Transverter Interface (needed if you add the 
P3 display)
  -- Elecraft PR 6-10 external pre-amp. (helpful on some weak signals on 6, 10 
and 12 meters)

According to Elecraft Technical Support, K3 serial numbers greater than 5000 
have "most major mods" that were updated since production startup.

Transceiver is clean, scratch-free and working well.

Price is $1900 with CONUS shipping included.

Smoke-free, non-pet home.

Thanks and 73,
Dick McClain, N9XO

dick_mcclain [at] sbcglobal.net    or   812-344-0747
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 for sale

[a...@juno.com]

Details and photos:
http://ae5x.blogspot.com/2016/07/elecraft-k3-for-sale.html

73,

John AE5X




Affordable Wireless Plans
Set up is easy. Get online in minutes.
Starting at only $9.95 per month! 
www.netzero.net?refcd=nzmem0216
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 for sale, anoher price drop

[Glen Torr]

Hi All,

For sale, K SN 2680.
Includes:-
General Coverge RX
700, 2.8K, 6.0 and 15K 8 pole filters.
100 Watt
ATU
Upgraded DSP Board
SS screws
K144XV internal 2 meter module.
HM2
Original owner, non smoker, little operating time. Built by professional
electronics technical officer.

AUD $2,500 negotiable.

At this price demo and shipping are purchasers responsibility

prefer VK 1,2 or 3 but not a show stopper elsewhere.

KX3 and KXPA 1000 are now favourites.

Cheers

Glen Torr, VK1FB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale With Options *** SOLD ***

[Ron Durie]

Ron Durie
WB4OOA 
Elecraft K3s-Line
(704) 843-3681





__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale With Options

[Ron Durie]

Elecraft K3/100; Late #7504, which includes all factory upgrades.  

K3SYN3AUPG newest Synthesizer option installed.  This significantly improves
receiver performance, and is the most significant upgrade option to the K3.


KXV3A Receive ANT IF out and XVRTR Interface board, installed.  
KIO3 I/O board option, installed.  

Standard KTCXO3 Reference Oscillator, 0.5PPM. 
KBPF3 General Coverage Receive option, installed.  

Standard 5 pole 2.7 kHz crystal filter.
KAT3 Internal automatic antenna tuner option, installed.  

In "Like New" condition.  No scratches or blemishes.  Even all the front
panel knobs are new.  One owner nonsmoker; and 18 months old. 

When I build these, I treat every connector pin with Caig De-Oxit Pro gold
solution, to prevent pin Oxidation; intermittent connections; easy connector
insertion; with very low contact resistance.  

Includes PowerPole Power cable; Allen wrenches; PA Jumper; and manuals.
Pictures available.   

$2495.00 plus $20 shipping CONUS.  PayPal; Bank check; or personal Check.   

Contact me off line at:  WB4OOA at gmail.com  

Ron Durie
Elecraft K3s-Line





__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 FOR SALE

[alvaro gaviria]

FOR SALE
K3/100 watts
One of the latest production, serial 8915
- 2.7 kHz 5-pole SSB/CW filter
- KSYN3A from factory (the new synth which is shipped with all K3S radios)

Non-smoking environment, no pets, no kids  and always used as a base
station -- not mobile.

Purchased directly from Elecraft 10 months ago, Factory assembled, K3/100W,
stainless H/W kit, USB adapter,MH2 Mic. with a normal roof filter, comes
with the new synthesizer, the serial is 8915. Never opened

All the original cables included

Worked only for  PSK31 at 30 watts

Non-smoking environment . Mint condition, original box, Mic, manual, very
few use I am selling it because I will need to move from here

asking for  US $2100, I will pay the FedEx freight from Colombia to USA

Payment via wire transfer to my nephew in Miami Florida

Shipping via FedEx

Mint condition power supply MFJ MV4225MV 25 Amps is included


Please write to alga...@gmail.com


73
ANDREW
HK4MKE

-- 

__

Alvaro Gaviria Cano. Ing.
http://astroretiro.260mb.com/
algav...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale with options

[Ron Durie]

Elecraft K3/100; Late #7504, which includes all factory upgrades.  
This is an excellent K3, out of the box.

K3SYN3AUPG newest Synthesizer option installed.  This significantly improves
receiver performance.  

KXV3A Receive ANT IF out and XVRTR Interface board.  
KIO3 I/O board option.  

Standard KTCXO3 Reference Oscillator, 0.5PPM. 
KBPF3 General Coverage Receive option.  

Standard 5 pole 2.7 kHz crystal filter.
KAT3 Internal automatic antenna tuner option.  

In "Like New" condition.  No scratches or blemishes.  Even all the front
panel knobs are new.  One owner nonsmoker.  It is 18 months old. 

This is the 4th K3 I have built.  When I build, these I treat every
connector pin with Caig De-Oxit Pro gold solution, to prevent pin Oxidation;
intermittent connections; easy connector insertion; and very low contact
resistance.  

Includes PowerPole Power cable; Allen wrenches; PA Jumper; and all manuals. 

Contact me (Ron)off line at:  WB4OOA at gmail.com 
$2795 Shipped CONUS.  PayPal; add 2%.  Check ok when cleared.  Pictures
available upon request. 






__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale Mint

[Ron Durie]

Elecraft K3/100 #7504, which includes all factory upgrades.  
This is a good basic K3 that won't take much to Option up.

K3SYN3AUPG newest Synthesizer option installed.  This significantly improves
receiver performance.  

KXV3A Receive ANT IF out and XVRTR Interface board.  
KIO3 I/O board option.  

Standard KTCXO3 Reference Oscillator, 0.5PPM. 
KBPF3 General Coverage Receive option.  

Standard 5 pole 2.7 kHz crystal filter.
KAT3 Internal automatic antenna tuner option.  

In "Like New" condition.  No scratches or blemishes.  Even all the front
panel knobs are new.  One owner nonsmoker.  It is 18 months old. 

This is the 4th K3 I have built.  When I build, these I treat every
connector pin with Caig De-Oxit Pro gold solution, to prevent pin Oxidation;
intermittent connections; easy connector insertion; and very low contact
resistance.  

Includes PowerPole Power cable; Allen wrenches; PA Jumper; and all manuals. 

Contact me off line at:  WB4OOA at gmail.com 
$2795 Shipped CONUS.  Pictures available upon request. 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale Mint

[Ron Durie]

Elecraft K3/100 #7504, which includes all factory upgrades.  
This is an excellent K3 that won't take much to Option up.

K3SYN3AUPG newest Synthesizer option installed.  This significantly improves
receiver performance.  

KXV3A Receive ANT IF out and XVRTR Interface board.  
KIO3 I/O board option.  

Standard KTCXO3 Reference Oscillator, 0.5PPM. 
KBPF3 General Coverage Receive option.  

Standard 5 pole 2.7 kHz crystal filter.
KAT3 Internal automatic antenna tuner option.  

In "Like New" condition.  No scratches or blemishes.  Even all the front
panel knobs are new.  One owner nonsmoker.  It is 18 months old. 

This is the 4th K3 I have built.  When I build, these I treat every
connector pin with Caig De-Oxit Pro gold solution, to prevent pin Oxidation;
intermittent connections; easy connector insertion; and very low contact
resistance.  

Includes PowerPole Power cable; Allen wrenches; PA Jumper; and all manuals. 

Contact me off line at:  WB4OOA at gmail.com 
$2795 Shipped CONUS.  PayPal; add 3%.  Check is ok when cleared.  Pictures
available upon request. 

Ron Durie
WB4OOA


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale

[AL7BA - Jim Shaw]

I have my K3/100 for sale.  I purchased it as a kit, S/N 5508, on 5/27/11. 
It's been in a non-smoking environment sharing a desktop with two other HF
rigs, so it has not seen full-time duty.  The following are included:

K3/100
KAT3 ATU
KXV3A RX Ant., IF Out and Xverter Interface
KFL3A 1.8kHz 8-pole roofing filter
KFL3A 2.1kHz 8-pole roofing filter
KFL3A 2.8kHz 8-pole roofing filter-2.7 swap
KFL3A 6.0kHz 8-pole filter
KBPF3 Gen Coverage RX Module
PR6 6m Preamp
Elecraft/Cady manuals, Nifty manual.

I also did the 12VDC OUT Current Modification to power the P3 Video/FFT
Adapter.  I am keeping the MH-2 mic and P3.

My cost then was roughly $3,100, cost now for similar K3S, albeit better
specs, roughly $4,200.  I'm asking $2500 plus shipping from Dayton, Ohio. 
Will consider any reasonable offers.  If interested, please e-mail me at
jsh...@woh.rr.com.  Prefer PayPal.  Thanx for your time.




-
73
Jim Shaw
AL7BA/8
--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-For-Sale-tp7614586.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 For Sale

[Richard Thorne]

The K3/P3 have been sold.

Thanks

Rich - N5ZC

On 2/20/2016 3:17 PM, Richard Thorne wrote:

I have the following K3-100F (not S) for sale.

Serial # 8233 with the following features:
Main Receiver has the following 8 Pole Filters: 6, 2.8,1.8,.400,.250
KRX3-F Sub Receiver with the following 8 pole Filters: 2.8, .400
KDVR3-F Digital Voice Recorder
KXV3B-F RX Ant., 2nd Pre-Amp, IF Out and Xverter Interface
KSYN3AUPG - 2 each upgraded at the factory

$2950 Shipped/Insured

Also have a P3 available. Prefer to sell together or rig first.

Paypal ok but will need to add 2.9% for fees. We can discuss other 
forms of payment as needed.


Rich - N5ZC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rtho...@rthorne.net



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale

[Richard Thorne]

I have the following K3-100F (not S) for sale.

Serial # 8233 with the following features:
Main Receiver has the following 8 Pole Filters: 6, 2.8,1.8,.400,.250
KRX3-F Sub Receiver with the following 8 pole Filters: 2.8, .400
KDVR3-F Digital Voice Recorder
KXV3B-F RX Ant., 2nd Pre-Amp, IF Out and Xverter Interface
KSYN3AUPG - 2 each upgraded at the factory

$2950 Shipped/Insured

Also have a P3 available. Prefer to sell together or rig first.

Paypal ok but will need to add 2.9% for fees. We can discuss other forms 
of payment as needed.


Rich - N5ZC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 fo sale

[alvaro gaviria]

Like new K3/100 watts factory assembled

One of the latest production, serial 8915


- 2.7 kHz 5-pole SSB/CW filter

- KSYN3A from factory (the new synth which is shipped with all new K3S
radios)



Non-smoking, no pets, no children home, and always used as a base station
-- not mobile.



Purchased directly from Elecraft 10 months ago, Factory assembled, K3/100W,
stainless H/W kit, USB adapter,MH2 Mic. with a normal roof filter, comes
with the new synthesizer, the serial is 8915. Never opened



All the original cables included

Worked only for  PSK31 at 30 watts

Non-smoking environment. Mint condition, original box, Mic, manual, very
few use I am selling it because I will need to move from here



asking for  US $2300, I will pay the FedEx freight from Colombia to USA



Payment via wire transfer to my nephew in Miami Florida

Shipping viia Fedex

a MFJ MV4225MV 25 Amps power supply is included





73

ANDREW

HK4MKE

-- 

__

Alvaro Gaviria Cano. Ing.
http://astroretiro.260mb.com/
algav...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale

[Richard Thorne]

I have the following K3-100F (not S) for sale.
Serial # 8233 with the following features:
Main Receiver has the following 8 Pole Filters: 6, 2.8,1.8,.400,.250
KRX3-F Sub Receiver with the following 8 pole Filters: 2.8, .400
KDVR3-F Digital Voice Recorder
KXV3B-F RX Ant., 2nd Pre-Amp, IF Out and Xverter Interface
KSYN3AUPG - 2 each upgraded at the factory

$2950 Shipped/Insured

Paypal ok but will need to add 2.9% for fees. We can discuss other forms 
of payment as needed.


Rich - N5ZC

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 For Sale

[K0ZL]

SOLD!!!  Thank you.

Dan, K0ZL



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-For-Sale-tp7613278p7613541.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 For Sale

[K0ZL]

SALE PENDING

K0ZL



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-For-Sale-tp7613278p7613450.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale

[Dan Reimer]

Due to a rapid decline in my vision, SO2R is no longer possible for me, so
I'm selling one of my K3 Transceivers.

It is a K3-100; I built it (serial number 6064), it has no scratches, and
has always been in a smoke-free home. It includes the 

KAT3 100 W Autotuner, optional 2.8 8-pole roofing filter, manuals, and power
cord.  I don't mean to sound like the salesman selling the car "driven only
by a little-old-lady on Sunday," but, honestly, I run QRP 99% of the time,
so this has seldom been driven over 5 watts output.  It has served me well -
in 2014 it helped me finish 3rd in the QRP category of Sweepstakes, Phone.

 

$1,850.00 shipped CONUS.  Payment by money order, cashiers check, or a
personal check, provided I can wait 10 days for it to clear.  I can't afford
PayPal commission, so, sorry, no PayPal.

 

If interested, contact me off the list at ki0ov1 at charter dot net (the
address is a leftover from my old call).

 

Dan, K0ZL, formerly KI0OV

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 For Sale

[Joe Word]

The K3 has been sold pending funds.

Joe  N9VX

On Thu, Jan 14, 2016 at 10:38 AM, Joe Word <n9vx@gmail.com> wrote:

> For sale Elecraft K3 100 watt version in excellent condition, no
> scratches, from a smoke free home, serial number 5429. Has optional KXV3A
> Interface (Rx Antenna ports, Transverter Ports and IF Out) and the stock
> 2.7 filter. Comes with manuals and power cord. $1900 shipped in CONUS.
> Payment by money order, Cashiers Check or cash, no Paypal.
> Contact me at: n9vx dot joe at gmail.com
>
> 73,
>
> Joe  N9VX
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale

[Joe Word]

For sale Elecraft K3 100 watt version in excellent condition, no scratches,
from a smoke free home, serial number 5429. Has optional KXV3A Interface
(Rx Antenna ports, Transverter Ports and IF Out) and the stock 2.7 filter.
Comes with manuals and power cord. $1900 shipped in CONUS. Payment by money
order, Cashiers Check or cash, no Paypal.
Contact me at: n9vx dot joe at gmail.com

73,

Joe  N9VX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] [K3] For sale: 500 Hz roofing filter

[Don Putnick via Elecraft]

For sale: KFL3A-500  500 Hz, 5-pole cw/data filter $50
Price includes USPS Priority Mail shipping to USA.
Certified check or USPS money order.
Please contact me off list:
Don dot NA6Z at yahoo dot com

73 Don NA6Z 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Elecraft K3 For sale

[Hugh Phillips K7XM]

Elecraft K3, 100 watt PA

Serial Number 8498,
One owner, used  less than 7 months.
Filters 2.7 and  8 pole 400 Hz.
Includes 100 watt ATU and Sub receiver.

Total investment  $3429.70
Asking $2400.00 plus shipping

73,
Hugh
K7XM

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale

[kd7rj]

Elecraft K3/100 watt transceiver S/N 5999 with KXV3A IF and 2.7 KHZ SSB filter. 
 No other options installed.  Comes with manuals and DC power cord.  Very good 
condition and built and calibrated by Electrical Engineer.  Most recent 
firmware and recently calibrated.  Shipped priority mail within the 50 states.  
$1730
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 for sale

[Tom Fitzgerald via Elecraft]

Elecraft K3/100 factory assembled transceiver for sale. This radio is serial 
number 3494 and is in absolutely flawless condition, not even the slightest 
blemish and it comes from a smoke free, pet free, kid free & climate controlled 
environment. It's been kept under a dust cover from day one as has all of my 
equipment. This radio has maybe 10 hours of use max on it. It is offered with 
the following options for $2,300 plus freight:

K3/100-F
2.8kHz, 8-pole filter
2.1kHz, 8-pole filter
1.8kHz, 8-pole filter
400Hz, 8-pole filter
6kHz, 8-pole filter
K3 TCXO
KXV3, Transverter Interface 
MH2, Hand mike (never used)

Fred Cady 298 page manual 2nd edition. 

This radio ships in the original factory box with all the original paperwork 
including the manual provided by Elecraft. Reason for sale...lack of interest 
in the hobby these days. I'm good via PayPal & will provide any additional info 
or high resolution pics if needed. The radio can be seen on my QRZ'd page as 
well. If interested, contact me at:

kd0...@yahoo.com





  
  
 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 for sale

[a...@juno.com]

I have a K3 (serial# 4014) with the following options:

100W amp
KXV3
400Hz filter

Mint condition, non-smoking home, manuals included as well as Fred KE7X's 
spiral bound "Design, Config & Operation" book.

$1800 plus shipping from 77339.

John AE5X
https://tatqrp.wordpress.com
 


Meet the Graviteers: Ezekiel Victor
My name is Zeke! I find it hard to pick favorites because I get sick of too 
much of one thing. Read more →
http://thirdpartyoffers.juno.com/TGL3131/561bcc33de3ad4c333d6bst03vuc
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale

[Howard Sherer]

In making my plans for a K3s upgrade, I have decided to sell my K3. I am
going to remove all of my optional filters and only include the 2.8, 8 pole
SSB. Currently running the latest firmware.

K3 100 S/N 504 with all updates except for the enhanced Lf bandwidth DSP
ATU
KXV3
KBF3

This has been a great radio, non smoking, no marks & very clean.

$1900. plus shipping in the factory carton
Howard AE3T
cell 484-951-1622
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 for Sale

[Tim Tucker]

K3 #4519 is still for sale to make room for a new K3S:

-100 watts
-ATU
-General Coverage RX module
-2.1 Khz 8 pole filter
-2.8 Khz 8 pole filter
-400 Hz 8 pole filter
- 6 Khz 8 pole filter
-13 Khz FM filter
-TCXO
-KXV3A Rx Ant, IF Out & Xverter interface
-PR6-10 Preamp

Price reduced to $2750 shipped.  If you don't want the extra filters,
general RX, TCXO, let me know and we can work out a deal without them.

Tim
AE6LX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 for Sale

[Tim Tucker]

K3 #4519 is up for sale.  It is configured as follows:

-100 watts
-ATU
-General Coverage RX module
-2.1 Khz 8 pole filter
-2.8 Khz 8 pole filter
-400 Hz 8 pole filter
- 6 Khz 8 pole filter
-13 Khz FM B/W filter
-TCXO
-KXV3A Rx Ant, IF Out & Xverter interface
-PR6-10 Preamp

This configuration would run over $4K new; I'm looking for $3000 shipped
for everything.

If you don't want the extra filters, general RX, or TCXO, I'll pull them
out and we can make a deal that doesn't include them.

Tim
AE6LX
-- 
Owner, worldwidedx.com
AE6LX, Amateur Radio
AAR9GA, Army MARS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 for Sale

[Ellam, Timothy St. J.]

Reposting this with an adjusted price.

s/n3334. Elecraft K3 in perfect condition with the following options:
KRX3 Sub receiver,
K3DVR Digital Voice Recorder,
KAT3 Antenna Tuner,
KXV3A,
MH2 Microphone.
KFL3A- 2.7 KHz filters in both the main and sub receiver,
KFL3A-1.8 KHz filter in the main receiver,
KFL3A- 500Khz filters in the main and sub receivers.
New aftermarket metal VFO knobs ( 73CNC-chrome insert) for VFO A and B ( not 
installed)
Updated by Elecraft in 12/12 for installation of the KRX3, KXV3A and KAT3 and 
LPA Heat sink, 8 volt regulator mod, KSYN3 DDS mod.
$2975 shipped in US and Canada.

Tim VE6SH




This e-mail may contain information that is privileged, confidential and/or 
exempt from disclosure. No waiver whatsoever is intended by sending this e-mail 
which is intended only for the named recipient(s). Unauthorized use, 
dissemination or copying is prohibited. If you receive this email in error, 
please notify the sender and destroy all copies of this e-mail. Our privacy 
policy is available at  www.mccarthy.cahttp://www.mccarthy.ca.

Click here to 
unsubscribemailto:listmana...@mccarthy.ca?subject=I%20wish%20to%20unsubscribe%20from%20commercial%20electronic%20messages%20from%20McCarthy%20Tetrault
 from commercial electronic messages. Please note that you will continue to 
receive non-commercial electronic messages, such as account statements, 
invoices, client communications, and other similar factual electronic 
communications.

Suite 5300, TD Bank Tower, Box 48, 66 Wellington Street West, Toronto, ON M5K 
1E6


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 for sale

[Ellam, Timothy St. J.]

s/n3334. Elecraft K3 with the following options:

KRX3 Sub receiver,

K3DVR Digital Voice Recorder,

KAT3 Antenna Tuner,

KXV3A,

MH2 Microphone.

KFL3A- 2.7 KHz filters in both the main and sub receiver,

KFL3A-1.8 KHz filter in the main receiver,

KFL3A- 500Khz filters in the main and sub receivers.

New aftermarket metal VFO knobs ( 73CNC-chrome insert) for VFO A and B ( not 
installed)

Updated by Elecraft in 12/12 for installation of the KRX3, KXV3A and KAT3 and 
LPA Heat sink, 8 volt regulator mod, KSYN3 DDS mod.


$3000 or $CDN equivalent plus shipping.

Tim VE6SH





This e-mail may contain information that is privileged, confidential and/or 
exempt from disclosure. No waiver whatsoever is intended by sending this e-mail 
which is intended only for the named recipient(s). Unauthorized use, 
dissemination or copying is prohibited. If you receive this email in error, 
please notify the sender and destroy all copies of this e-mail. Our privacy 
policy is available at  www.mccarthy.cahttp://www.mccarthy.ca.

Click here to 
unsubscribemailto:listmana...@mccarthy.ca?subject=I%20wish%20to%20unsubscribe%20from%20commercial%20electronic%20messages%20from%20McCarthy%20Tetrault
 from commercial electronic messages. Please note that you will continue to 
receive non-commercial electronic messages, such as account statements, 
invoices, client communications, and other similar factual electronic 
communications.

Suite 5300, TD Bank Tower, Box 48, 66 Wellington Street West, Toronto, ON M5K 
1E6


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 for sale

[K4GM George]

Factory built K3/100w with auto antenna tuner and two extra filters:  
400hz 8 pole and 2100hz 8 pole.
S/N  2063.  Mint condition and fully working.  Will deliver within a 
reasonable distance or meet you halfway.$2395 plus you pay 
shipping.   Total recent retail value of comparable unit was 
approximately $3200.  Please reply off list.


George K4GM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 for sale

[K4GM George]

Factory built K3/100w with auto antenna tuner and two extra filters:  
400hz 8 pole and 2100hz 8 pole.
S/N  2063.  Mint condition and fully working.  Will deliver within a 
reasonable distance or meet you halfway.$2500 plus you pay 
shipping.   Total recent retail value of comparable unit was 
approximately $3200.  Please reply off list.


George K4GM

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale

[Michael Raskin]

I have a late model (s/n 8579) 100 Watt factory assembled K3 with 2nd receiver 
and antenna tuner.  It also has the latest factory installed KSYN3A Synthesizer 
boards for both the main and 2nd receivers, as well as lots of other goodies.   
The K3 has the latest (ver. 5.14) firmware, and was factory calibrated and 
aligned. Absolutely pristine and no issues. A new K3s, with the same 
accessories, would cost you over $4,550.  Buy mine for $3,100.  Not interested 
in any trades.  Pick up in South Florida, or shipping and insurance extra.

FEATURES:

K3/100-F  100W Transceiver (factory assembled)

KAT3-F  ATU (factory Installed)

KXV3A-F   RX Ant, IF Out and Xverter Interface (factory 
Installed)

KTCXO3-1-F XCO (0.5ppm) (factory Installed)

K3EXREF-FExt 10MHz Ref Input for K3 (factory Installed)

KDVR3-F   Digital Voice Recorder (factory Installed)

KRX3-F  2nd RX for K3 (factory Installed)

KSYN3ATwo Synthesizers (for main and 2nd RX) - (factory 
installed)

Pair of 2.8 kHz (8-pole) filters in both the main and sub-receivers

Mike, W4UM  w...@arrl.net 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale

[Jim Brown]

My neighbor Pat Miller, W6DRX, used to be an active contester, but has 
been inactive for several years due to health issues and a major job 
change. Pat and Sandy are moving out of their house (which they will 
rent out) to live on a sailboat that they just bought. He's selling all 
his radio gear, including an early serial number K3. He built it from a 
kit, and I opened it up to verify what was in it. It is VERY clean.


Here's what's in it, and what it would have cost if you had ordered it 
as a kit last month and built it yourself. A factory built rig would, of 
course, have cost several hundred dollars more.


 2015 Price
K3/100 Base Rig Kit $2,500
KXV3 Transverter I/O Kit   120
K3 ATU Kit 320
2.7 kHz 5-pole TX Filter   incl
400 Hz 8-pole Filter   140
1.8 kHz 8-pole Filter  140
Total3,220
CA Tax 258
Total w/tax $3,478

On the advice of K6XX, Pat is asking $2,600 for the K3 as built. He will 
accept offers without one or both of the filters. He also has an 
un-built 2nd RX kit, which is the same as what is currently being sold 
for $600. Pat is asking $400.


I posted this listing last week, and I'm really surprised that this 
hasn't been snapped up!  It's a very good deal on a very clean radio. 
Only yesterday, K4TM posted here that he had sold a similarly equipped 
radio for several hundred dollars more! If you don't like the price, 
make an offer.


73, Jim K9YC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 For Sale

[Merv Schweigert]

Not to put a damper on things,  but you have to consider what you are 
buying in light of

the new K3S..

The same K3S today would cost 3250.00   with all the new updates.

So if you take 2600 plus a new synth board,  and new KXV3B at min for 
updates
you have 3020.You did not list the serial number,  so if it needs 
the newer DSP
boards etc you are up to the brand new price of the K3S which has all 
updates.
Guys snapping up older K3 need to do a cost comparison and see what fits 
their
needs these days.   I have two K3 and it sure does not seem cost 
effective to me to
update these old ones when a new one would be cheaper,   in fact if you 
swap
over your filters and a module or two a new K3S is far cheaper than 
updating.
If its an old serial number the updates will put you well over the 
price of a new

radio.

So while its super to be able to update to what you have needs for, its 
not a good

idea if your going to try and do all the updates to an older one.
Something I have to face in light of owning 2 older k3..   what to do 
with them,
any way I see it I will have to take a loss when selling compared to a 
month

ago.
73 Merv K9FD/KH6


My neighbor Pat Miller, W6DRX, used to be an active contester, but has 
been inactive for several years due to health issues and a major job 
change. Pat and Sandy are moving out of their house (which they will 
rent out) to live on a sailboat that they just bought. He's selling 
all his radio gear, including an early serial number K3. He built it 
from a kit, and I opened it up to verify what was in it. It is VERY 
clean.


Here's what's in it, and what it would have cost if you had ordered it 
as a kit last month and built it yourself. A factory built rig would, 
of course, have cost several hundred dollars more.


 2015 Price
K3/100 Base Rig Kit $2,500
KXV3 Transverter I/O Kit   120
K3 ATU Kit 320
2.7 kHz 5-pole TX Filter   incl
400 Hz 8-pole Filter   140
1.8 kHz 8-pole Filter  140
Total3,220
CA Tax 258
Total w/tax $3,478

On the advice of K6XX, Pat is asking $2,600 for the K3 as built. He 
will accept offers without one or both of the filters. He also has an 
un-built 2nd RX kit, which is the same as what is currently being sold 
for $600. Pat is asking $400.


I posted this listing last week, and I'm really surprised that this 
hasn't been snapped up!  It's a very good deal on a very clean radio. 
Only yesterday, K4TM posted here that he had sold a similarly equipped 
radio for several hundred dollars more! If you don't like the price, 
make an offer.


73, Jim K9YC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k...@flex.com



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale

[Anthony DeBiasi]

K3 For Sale, serial 4985 in mint condition.  Please email direct for
complete information and price.

73ŠTony K2SG



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale

[Thomas Mahaney via Elecraft]

I have a K3 S#00750 that is extra to my needs at present. It has the following:
K3/100   KAT3
KRX3 KBPF3
KFL3A 1.8K 

2.7 K 5- Pole

KAT500-K

$ 3000  + shipping to U.S. Address  + Insurance   SHIPPING BY FEDX

thomas.mahaneyn...@yahoo.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale

[mail]

I love my KX3 but I’m beginning my search for a clean, K3 with CW options and 
P3. If you know of a reliable someone, please contact me at m...@brucemicek.com.


Thanks,


Bruce, W9AKX






Sent from Windows Mail
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 FOR SALE

[Bill Coleman]

Loaded K3/100, serial number 00929, all applicable mods installed including
updated DSP.  Includes: K3/100; KRX3 Sub RX; two KBPF3 RX general coverage
bandpass filters (main and sub RX); KAT3; KXV3; KDVR3; Main RX filters
13kHZ, 6kHz, 2.8kHz, 1.8kHz, 400Hz; Sub RX filters 2.8kHz, 400Hz; PR6
preamp. Only un-authorized mod is replacement solid aluminum concentric
knobs for AF/SUB and RF/SUB controls; original knobs included. 100%
operational; no scratches, dents, etc.; non-smoker. Price $3000 plus
shipping  insurance US only.  Thanks, N2BC

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale

[Ron Gould]

K3/100 K3 100W 160-6 meter transceiver, KAT3 Automatic antenna tuner, KFL3A-400 
400 Hz, 8 pole filter, 2.7 kHz 5-pole filter, KXV3A, K3 RX Ant, IF Out  Xvrtr 
Interface, DSP upgrade board, Very good condition, S/N 27xx.  This was spare 
radio.  $2350 shipped, Federal Express ground including insurance (USA only) 
$2349.  Contact off list.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale

[Ron Durie]

Elecraft K3/100 Serial Number 6175, with:
KXV3A Receive ANT IF out and XVRTR Interface board
KTCX03-1 High Accuracy 0.1ppm Reference Oscillator
KDVR3 Digital Voice Recorder board
KBPF3 General Coverage Receive module
Standard 5 pole 2.7khz filter
K3EXREF External Reference Input

New Kit cost is:  $2719.70
Will sell for:  $2500 plus shipping.

This is in excellent condition with all mods and updates.
This is the 6th K3 I have built.  When I build these, I treat every connector
pin with Caig De-Oxit Pro gold solution.
This prevents pin Oxidation and intermittent connections.  
This also allows the connectors to insert easier and provides very low contact
resistance.  
Contact me off line at:  WB4OOA at gmail.com

Ron Durie  (704) 843-3681


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale

[Ron Durie]

Elecraft K3/100 Serial Number 6175, with:
KXV3A Receive ANT IF out and XVRTR Interface board
KTCX03-1 High Accuracy 0.1ppm Reference Oscillator
KDVR3 Digital Voice Recorder board
KBPF3 General Coverage Receive module
Standard 5 pole 2.7khz filter
K3EXREF External Reference Input

New Kit cost is:  $2719.70
Will sell for:  $2500 plus shipping.

These are in excellent condition with all mods and updates.
This is the 6th K3 I have built.  When I build these, I treat every connector
pin with Caig De-Oxit Pro gold solution.
This prevents pin Oxidation and intermittent connections.  
This also allows the connectors to insert easier and provides very low contact
resistance.  

Contact me off line at:  WB4OOA at gmail.com 


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 For Sale

[Ron Durie]

Elecraft K3/100 Serial Number 6175, with:
KXV3A Receive ANT IF out and XVRTR Interface board
KTCX03-1 High Accuracy 0.1ppm Reference Oscillator
KDVR3 Digital Voice Recorder board
KBPF3 General Coverage Receive module
Standard 5 pole 2.7khz filter
K3EXREF External Reference Input
New Kit cost is:  $2719.70
Will sell for:  $2500 plus shipping.
These are in excellent condition with all mods and updates.
This is the 6th K3 I have built.  When I build them, I treat every connector pin
with Caig De-Oxit Pro gold solution.
This prevents pin Oxidation and intermittent connections.  
This also allows the connectors to insert easier and provides very low contact
resistance.  
Contact me off line at:  WB4OOA at gmail.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com