Re: [Elecraft] K3 push buttons no longer workin
You might be able to use a radio control program (HRD being one) since the controls simply tell the CPU what to do. Not ideal but you'd be on the air again while researching a proper fix. 73 Rick NK7I On 11/18/2019 11:46 AM, Mpridesti via Elecraft wrote: Hate to have to send it back to the factory at this time of the year. Is there a work around? Regards, Mark, K1RX On Nov 18, 2019, at 1:15 PM, Christian Friess wrote: In my case the 4 rotary encoders had to be replaced. 73 de Chris, DL2MDU Am 18.11.2019 um 17:44 schrieb Mpridesti via Elecraft: Specifically the front panel button to select shift Lo Hi Width do not toggle. Only stays in FC or BW. Did a firmware reload (newest from web) and no change. What’s the fix? Regards, Mark, K1RX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to dl2...@darc.de __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to mpride...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to rick.n...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 push buttons no longer workin
It is probably a bad encoder. Leaky pushbutton disrupting the switch matrix. To confirm, try the switchtest in the config menu. If switchtest is OK, some modes don't allow you to change the width, try SSB I believe. If it is the encoder, replace all 4. If it is an older radio, send it in and we can do it, and there are a lot of updates and optional upgrades. Keith WE6R __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 push buttons no longer workin
Serial number is 6587 Regards, Mark, K1RX > On Nov 18, 2019, at 2:38 PM, > wrote: > > Mark, > What is the serial number of your K3? > Later K3s above serial number approximately 4000-4100 have a different > encoder. > My serial # 3505 had to have the encoders replaced. > The new encoders are apparently more robust. I have not had any trouble with > the encoders on K3 serial #7436. > My brother-in-law now has K3 serial #3505 and has not had any problems since > their replacement in 2015. > > 73, > Mark, WB9CIF > > -Original Message- > From: elecraft-boun...@mailman.qth.net On > Behalf Of Christian Friess > Sent: Monday, November 18, 2019 18:15 > To: elecraft@mailman.qth.net > Subject: Re: [Elecraft] K3 push buttons no longer workin > > In my case the 4 rotary encoders had to be replaced. > > 73 de Chris, DL2MDU > >> Am 18.11.2019 um 17:44 schrieb Mpridesti via Elecraft: >> Specifically the front panel button to select shift Lo Hi Width do not >> toggle. Only stays in FC or BW. >> >> Did a firmware reload (newest from web) and no change. >> >> What’s the fix? >> >> Regards, >> >> Mark, K1RX >> >> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net Please help support this email >> list: http://www.qsl.net/donate.html Message delivered to >> dl2...@darc.de > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Message > delivered to markmus...@sbcglobal.net > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to mpride...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 push buttons no longer workin
Hate to have to send it back to the factory at this time of the year. Is there a work around? Regards, Mark, K1RX > On Nov 18, 2019, at 1:15 PM, Christian Friess wrote: > > In my case the 4 rotary encoders had to be replaced. > > 73 de Chris, DL2MDU > >> Am 18.11.2019 um 17:44 schrieb Mpridesti via Elecraft: >> Specifically the front panel button to select shift Lo Hi Width do not >> toggle. Only stays in FC or BW. >> >> Did a firmware reload (newest from web) and no change. >> >> What’s the fix? >> >> Regards, >> >> Mark, K1RX >> >> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to dl2...@darc.de > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to mpride...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 push buttons no longer workin
Mark, Replace the encoder with its built-in switch. While you are at it, you may as well replace all 4 of them. 73, Don W3FPR On 11/18/2019 11:44 AM, Mpridesti via Elecraft wrote: Specifically the front panel button to select shift Lo Hi Width do not toggle. Only stays in FC or BW. Did a firmware reload (newest from web) and no change. What’s the fix? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 push buttons no longer workin
Mark, What is the serial number of your K3? Later K3s above serial number approximately 4000-4100 have a different encoder. My serial # 3505 had to have the encoders replaced. The new encoders are apparently more robust. I have not had any trouble with the encoders on K3 serial #7436. My brother-in-law now has K3 serial #3505 and has not had any problems since their replacement in 2015. 73, Mark, WB9CIF -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Christian Friess Sent: Monday, November 18, 2019 18:15 To: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 push buttons no longer workin In my case the 4 rotary encoders had to be replaced. 73 de Chris, DL2MDU Am 18.11.2019 um 17:44 schrieb Mpridesti via Elecraft: > Specifically the front panel button to select shift Lo Hi Width do not > toggle. Only stays in FC or BW. > > Did a firmware reload (newest from web) and no change. > > What’s the fix? > > Regards, > > Mark, K1RX > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > dl2...@darc.de __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to markmus...@sbcglobal.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 push buttons no longer workin
In my case the 4 rotary encoders had to be replaced. 73 de Chris, DL2MDU Am 18.11.2019 um 17:44 schrieb Mpridesti via Elecraft: Specifically the front panel button to select shift Lo Hi Width do not toggle. Only stays in FC or BW. Did a firmware reload (newest from web) and no change. What’s the fix? Regards, Mark, K1RX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to dl2...@darc.de __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 push buttons no longer workin
Specifically the front panel button to select shift Lo Hi Width do not toggle. Only stays in FC or BW. Did a firmware reload (newest from web) and no change. What’s the fix? Regards, Mark, K1RX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com