Hi Swapping the top is easy. It requires removing 6 screws and unplugging a few cables. The only problem is the side screws that thread into the KPA100 tend to strip out if removed too many times. You can replace them with the larger screws available for free from Elecraft or just not use them. It does take a few minutes to do the swap and you need to be careful to plug in the cables correctly and make sure the cable routing is OK
The reason for mounting separately into an EC2 box is the K2 can remain in its QRP dress including the battery, KIO2 and KAT2. The KPA100 and perhaps KAT100 resides in the separate EC2 box. For QRP operation just unplug a BNC cable from the KAT2 and the 9 pin control cable from the KIO2 and you are ready to go. When every thing is reconnected the K2 "knows" the KPA100 and KAT100 are there and sets the KAT2 to bypass as well as enabling the KPA100. The unplugging takes less than a minute and does not require opening any of the boxes. Besides the matching separate units look cool in the shack. Don Brown KD5NDB ----- Original Message ----- From: "John Wiener" <[EMAIL PROTECTED]> To: <elecraft@mailman.qth.net> Sent: Tuesday, February 28, 2006 9:50 PM Subject: [Elecraft] KPA100 as a separate box > I read in the KPA 100 manual that it is easy to remove the amp to use > K2 in QRP mode. I also, see several amps mounted in separate > enclosures. > > Is it really a quick-change procedure to remove the KPA 100 from the > K2? If so, what would be the reason to use a separate enclosure? > > John > _______________________________________________ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
