Re: [Elecraft] KPA1500 with K3 Remote question

[K8TE]

When the clutch failed at a Spec Miata race at Miller Motorsports Park UT, I
used this method to start, run, and complete the race.  My lap tap dropped
about two seconds, but I still placed in the middle of the pack.  The clutch
didn't suffer nor would I expect the KPA1500 to suffer using this method.

73, Bill, K8TE


Yes true and the KPA500 has a like menu to power up in Operate mode.   
At the same time, I think bringing a station up in Operate mode is much 
like starting a car in gear.  Oh by the way, older cars and trucks with 
manual transmissions, column or floor shift,  could be started in gear.  
Not usually with good outcomes either.

73
Bob, K4TAX





--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KPA1500 with K3 Remote question

[GWK]

And, BTW, this was the only way to get home after the clutch bracket 
failed and left you connected.  You could start in 1st gear, and with 
care, do your shifting without the clutch.  I'm sure most of us old 
timers remember doing that upon occasion!


George, W3HBM

On 7/2/2018 1:46 PM, Bob McGraw K4TAX wrote:
Yes true and the KPA500 has a like menu to power up in Operate mode. At 
the same time, I think bringing a station up in Operate mode is much 
like starting a car in gear.  Oh by the way, older cars and trucks with 
manual transmissions, column or floor shift,  could be started in gear. 
Not usually with good outcomes either.


73
Bob, K4TAX


On 7/2/2018 10:37 AM, Brian F. Wruble wrote:

Thanks. I found it.  All good now.

On Mon, Jul 2, 2018 at 11:33 AM Paul Baldock > wrote:


    KPA1500 has a menu setting to turn on in OPERATE.

    - Paul  KW7Y

    At 07:57 AM 7/2/2018, Bob McGraw K4TAX wrote:
    >I agree as I like to check antennas before operating. Less smoke
    >comes out of the boxes that way.
    >
    >Bob, K4TAX
    >
    >
    >Sent from my iPhone
    >
    > > On Jul 2, 2018, at 9:40 AM, Wes Stewart mailto:wes_n...@triconet.org>> wrote:
    > >
    > > If it's like a KPA500, you can have it go to Operate when powered
    > on.  Menu "PWR ON = OPER"
    > >
    > > Caveat, I don't use the K3 to turn on the amp. Separate 
operation.

    > >
    > > Wes  N7WS
    > >
    > >> On 7/2/2018 7:13 AM, Brian F. Wruble wrote:
    > >> I have just installed my new KPA1500 with my K3.  I have run
    a line from
    > >> the 12V jack on the K3 ro the "remote" jack on the
    > KPA1500.  When I turn on
    > >> the K3, the KPA1500 also comes on, but in standby mode.  Does
    > anyone have a
    > >> macro for the K3 that will cause it to switch to "Operate"?
    > >>
    > >> Tnx es 73 de Brian W3BW
    > >>
    > >>        *Brian F. Wruble, C.F.A.
    > >>         The Conch Republic
    > >> "We seceded where others failed."
    > >> __
    > >> Elecraft mailing list
    > >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
    > >> Help: http://mailman.qth.net/mmfaq.htm
    > >> Post: mailto:Elecraft@mailman.qth.net
    
    > >>
    > >> This list hosted by: http://www.qsl.net
    > >> Please help support this email list:
    http://www.qsl.net/donate.html
    > >> Message delivered to wes_n...@triconet.org
    
    > >>
    > >
    > > __
    > > Elecraft mailing list
    > > Home: http://mailman.qth.net/mailman/listinfo/elecraft
    > > Help: http://mailman.qth.net/mmfaq.htm
    > > Post: mailto:Elecraft@mailman.qth.net
    
    > >
    > > This list hosted by: http://www.qsl.net
    > > Please help support this email list:
    http://www.qsl.net/donate.html
    > > Message delivered to rmcg...@blomand.net
    
    >
    >
    >__
    >Elecraft mailing list
    >Home: http://mailman.qth.net/mailman/listinfo/elecraft
    >Help: http://mailman.qth.net/mmfaq.htm
    >Post: mailto:Elecraft@mailman.qth.net
    
    >
    >This list hosted by: http://www.qsl.net
    >Please help support this email list: http://www.qsl.net/donate.html
    >Message delivered to p...@paulbaldock.com
    

    __
    Elecraft mailing list
    Home: http://mailman.qth.net/mailman/listinfo/elecraft
    Help: http://mailman.qth.net/mmfaq.htm
    Post: mailto:Elecraft@mailman.qth.net
    

    This list hosted by: http://www.qsl.net
    Please help support this email list: http://www.qsl.net/donate.html
    Message delivered to bwru...@gmail.com 

--

       *Brian F. Wruble, C.F.A.
        The Conch Republic
"We seceded where others failed."







__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to gkid...@ilstu.edu

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KPA1500 with K3 Remote question

[Bob McGraw K4TAX]

Yes true and the KPA500 has a like menu to power up in Operate mode.   
At the same time, I think bringing a station up in Operate mode is much 
like starting a car in gear.  Oh by the way, older cars and trucks with 
manual transmissions, column or floor shift,  could be started in gear.  
Not usually with good outcomes either.


73
Bob, K4TAX


On 7/2/2018 10:37 AM, Brian F. Wruble wrote:

Thanks. I found it.  All good now.

On Mon, Jul 2, 2018 at 11:33 AM Paul Baldock > wrote:


KPA1500 has a menu setting to turn on in OPERATE.

- Paul  KW7Y

At 07:57 AM 7/2/2018, Bob McGraw K4TAX wrote:
>I agree as I like to check antennas before operating. Less smoke
>comes out of the boxes that way.
>
>Bob, K4TAX
>
>
>Sent from my iPhone
>
> > On Jul 2, 2018, at 9:40 AM, Wes Stewart mailto:wes_n...@triconet.org>> wrote:
> >
> > If it's like a KPA500, you can have it go to Operate when powered
> on.  Menu "PWR ON = OPER"
> >
> > Caveat, I don't use the K3 to turn on the amp. Separate operation.
> >
> > Wes  N7WS
> >
> >> On 7/2/2018 7:13 AM, Brian F. Wruble wrote:
> >> I have just installed my new KPA1500 with my K3.  I have run
a line from
> >> the 12V jack on the K3 ro the "remote" jack on the
> KPA1500.  When I turn on
> >> the K3, the KPA1500 also comes on, but in standby mode.  Does
> anyone have a
> >> macro for the K3 that will cause it to switch to "Operate"?
> >>
> >> Tnx es 73 de Brian W3BW
> >>
> >>        *Brian F. Wruble, C.F.A.
> >>         The Conch Republic
> >> "We seceded where others failed."
> >> __
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft@mailman.qth.net

> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list:
http://www.qsl.net/donate.html
> >> Message delivered to wes_n...@triconet.org

> >>
> >
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net

> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list:
http://www.qsl.net/donate.html
> > Message delivered to rmcg...@blomand.net

>
>
>__
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft@mailman.qth.net

>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to p...@paulbaldock.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to bwru...@gmail.com 

--

       *Brian F. Wruble, C.F.A.
        The Conch Republic
"We seceded where others failed."







__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KPA1500 with K3 Remote question

[Brian F. Wruble]

Thanks. I found it.  All good now.

On Mon, Jul 2, 2018 at 11:33 AM Paul Baldock  wrote:

> KPA1500 has a menu setting to turn on in OPERATE.
>
> - Paul  KW7Y
>
> At 07:57 AM 7/2/2018, Bob McGraw K4TAX wrote:
> >I agree as I like to check antennas before operating.  Less smoke
> >comes out of the boxes that way.
> >
> >Bob, K4TAX
> >
> >
> >Sent from my iPhone
> >
> > > On Jul 2, 2018, at 9:40 AM, Wes Stewart  wrote:
> > >
> > > If it's like a KPA500, you can have it go to Operate when powered
> > on.  Menu "PWR ON = OPER"
> > >
> > > Caveat, I don't use the K3 to turn on the amp.  Separate operation.
> > >
> > > Wes  N7WS
> > >
> > >> On 7/2/2018 7:13 AM, Brian F. Wruble wrote:
> > >> I have just installed my new KPA1500 with my K3.  I have run a line
> from
> > >> the 12V jack on the K3 ro the "remote" jack on the
> > KPA1500.  When I turn on
> > >> the K3, the KPA1500 also comes on, but in standby mode.  Does
> > anyone have a
> > >> macro for the K3 that will cause it to switch to "Operate"?
> > >>
> > >> Tnx es 73 de Brian W3BW
> > >>
> > >>*Brian F. Wruble, C.F.A.
> > >> The Conch Republic
> > >> "We seceded where others failed."
> > >> __
> > >> Elecraft mailing list
> > >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > >> Help: http://mailman.qth.net/mmfaq.htm
> > >> Post: mailto:Elecraft@mailman.qth.net
> > >>
> > >> This list hosted by: http://www.qsl.net
> > >> Please help support this email list: http://www.qsl.net/donate.html
> > >> Message delivered to wes_n...@triconet.org
> > >>
> > >
> > > __
> > > Elecraft mailing list
> > > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > > Help: http://mailman.qth.net/mmfaq.htm
> > > Post: mailto:Elecraft@mailman.qth.net
> > >
> > > This list hosted by: http://www.qsl.net
> > > Please help support this email list: http://www.qsl.net/donate.html
> > > Message delivered to rmcg...@blomand.net
> >
> >
> >__
> >Elecraft mailing list
> >Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >Help: http://mailman.qth.net/mmfaq.htm
> >Post: mailto:Elecraft@mailman.qth.net
> >
> >This list hosted by: http://www.qsl.net
> >Please help support this email list: http://www.qsl.net/donate.html
> >Message delivered to p...@paulbaldock.com
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to bwru...@gmail.com
>
-- 

   *Brian F. Wruble, C.F.A.
The Conch Republic
"We seceded where others failed."
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KPA1500 with K3 Remote question

[Paul Baldock]

KPA1500 has a menu setting to turn on in OPERATE.

- Paul  KW7Y

At 07:57 AM 7/2/2018, Bob McGraw K4TAX wrote:
I agree as I like to check antennas before operating.  Less smoke 
comes out of the boxes that way.


Bob, K4TAX


Sent from my iPhone

> On Jul 2, 2018, at 9:40 AM, Wes Stewart  wrote:
>
> If it's like a KPA500, you can have it go to Operate when powered 
on.  Menu "PWR ON = OPER"

>
> Caveat, I don't use the K3 to turn on the amp.  Separate operation.
>
> Wes  N7WS
>
>> On 7/2/2018 7:13 AM, Brian F. Wruble wrote:
>> I have just installed my new KPA1500 with my K3.  I have run a line from
>> the 12V jack on the K3 ro the "remote" jack on the 
KPA1500.  When I turn on
>> the K3, the KPA1500 also comes on, but in standby mode.  Does 
anyone have a

>> macro for the K3 that will cause it to switch to "Operate"?
>>
>> Tnx es 73 de Brian W3BW
>>
>>*Brian F. Wruble, C.F.A.
>> The Conch Republic
>> "We seceded where others failed."
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to wes_n...@triconet.org
>>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcg...@blomand.net


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to p...@paulbaldock.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KPA1500 with K3 Remote question

[Dick Dievendorff]

There is a KPA1500 Power On menu item for operate or standby. 

73 de Dick, K6KR

Sent from my iPhone

> On Jul 2, 2018, at 07:13, Brian F. Wruble  wrote:
> 
> I have just installed my new KPA1500 with my K3.  I have run a line from
> the 12V jack on the K3 ro the "remote" jack on the KPA1500.  When I turn on
> the K3, the KPA1500 also comes on, but in standby mode.  Does anyone have a
> macro for the K3 that will cause it to switch to "Operate"?
> 
> Tnx es 73 de Brian W3BW
> 
>   *Brian F. Wruble, C.F.A.
>The Conch Republic
> "We seceded where others failed."
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to d...@elecraft.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KPA1500 with K3 Remote question

[Bob McGraw K4TAX]

I agree as I like to check antennas before operating.  Less smoke comes out of 
the boxes that way. 

Bob, K4TAX


Sent from my iPhone

> On Jul 2, 2018, at 9:40 AM, Wes Stewart  wrote:
> 
> If it's like a KPA500, you can have it go to Operate when powered on.  Menu 
> "PWR ON = OPER"
> 
> Caveat, I don't use the K3 to turn on the amp.  Separate operation.
> 
> Wes  N7WS
> 
>> On 7/2/2018 7:13 AM, Brian F. Wruble wrote:
>> I have just installed my new KPA1500 with my K3.  I have run a line from
>> the 12V jack on the K3 ro the "remote" jack on the KPA1500.  When I turn on
>> the K3, the KPA1500 also comes on, but in standby mode.  Does anyone have a
>> macro for the K3 that will cause it to switch to "Operate"?
>> 
>> Tnx es 73 de Brian W3BW
>> 
>>*Brian F. Wruble, C.F.A.
>> The Conch Republic
>> "We seceded where others failed."
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to wes_n...@triconet.org
>> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcg...@blomand.net


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KPA1500 with K3 Remote question

[Wes Stewart]

If it's like a KPA500, you can have it go to Operate when powered on.  Menu "PWR 
ON = OPER"


Caveat, I don't use the K3 to turn on the amp.  Separate operation.

Wes  N7WS

On 7/2/2018 7:13 AM, Brian F. Wruble wrote:

I have just installed my new KPA1500 with my K3.  I have run a line from
the 12V jack on the K3 ro the "remote" jack on the KPA1500.  When I turn on
the K3, the KPA1500 also comes on, but in standby mode.  Does anyone have a
macro for the K3 that will cause it to switch to "Operate"?

Tnx es 73 de Brian W3BW

*Brian F. Wruble, C.F.A.
 The Conch Republic
"We seceded where others failed."
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to wes_n...@triconet.org



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KPA1500 with K3 Remote question

[K9MA]

There's a menu item on the KPA1500 to make it come up in operate mode.

73,
Scott K9MA


On 7/2/2018 09:13, Brian F. Wruble wrote:

I have just installed my new KPA1500 with my K3.  I have run a line from
the 12V jack on the K3 ro the "remote" jack on the KPA1500.  When I turn on
the K3, the KPA1500 also comes on, but in standby mode.  Does anyone have a
macro for the K3 that will cause it to switch to "Operate"?

Tnx es 73 de Brian W3BW

*Brian F. Wruble, C.F.A.
 The Conch Republic
"We seceded where others failed."
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k...@sdellington.us



--
Scott  K9MA

k...@sdellington.us

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] KPA1500 with K3 Remote question

[Brian F. Wruble]

I have just installed my new KPA1500 with my K3.  I have run a line from
the 12V jack on the K3 ro the "remote" jack on the KPA1500.  When I turn on
the K3, the KPA1500 also comes on, but in standby mode.  Does anyone have a
macro for the K3 that will cause it to switch to "Operate"?

Tnx es 73 de Brian W3BW

   *Brian F. Wruble, C.F.A.
The Conch Republic
"We seceded where others failed."
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com