Re: [Elecraft] KRX3 always uses antenna from main RX
This must have been N1MM+ or I pressed RX ANT too long. I forgot that RX hold has a functionality with SUB on, switching between AUX and MAIN. It is easy to be fooled. Good that this group exists. Ignacy -- View this message in context: http://elecraft.365791.n2.nabble.com/KRX3-always-uses-antenna-from-main-RX-tp7606130p7606141.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KRX3 always uses antenna from main RX
I tried diversity today and something is wrong. KRX3 input (BNC) is not working and KRX3 receives always receives signals from the main RX. In KRX3 menu, Ant=bnc Definitely the diversity was working a couple of month ago. I upgraded to the newest beta, and no change. Any idea what might have happened? Ignacy, NO9E -- View this message in context: http://elecraft.365791.n2.nabble.com/KRX3-always-uses-antenna-from-main-RX-tp7606130.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KRX3 always uses antenna from main RX
Please ignore. After a few turning of and on, reloading N1MM, etc., KRX3 is working well again. Have no idea why BNC input was not working. Ignacy -- View this message in context: http://elecraft.365791.n2.nabble.com/KRX3-always-uses-antenna-from-main-RX-tp7606130p7606131.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KRX3 always uses antenna from main RX
N1MM has the capability to turn the KRX3 on and off depending on spots, and can undo what you last did on the front panel. Doing a hold on RX ANT on the front panel will toggle the KRX3 between MAIN and whatever is connected to the AUX input. The latter could either be the BNC or the SO239 not in use by the TX, depending on where the KRX3 aux input was connected at assembly. 73, Guy K2AV On Sat, Aug 8, 2015 at 10:27 PM, Ignacy n...@arrl.net wrote: Please ignore. After a few turning of and on, reloading N1MM, etc., KRX3 is working well again. Have no idea why BNC input was not working. Ignacy -- View this message in context: http://elecraft.365791.n2.nabble.com/KRX3-always-uses-antenna-from-main-RX-tp7606130p7606131.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k2av@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KRX3 always uses antenna from main RX
Ignacy, Which TMP connector is plugged into your subRX AUX input. Is it the BNC connector or the TMP cable from the KAT3? If it is the BNC connector, then the BNC jack should work - that is the plugging used for the K3 (K3S) factory build units. If however, you have the TMP cable from the KAT3 plugged in, the subRX will use the non-transmit SO-239 jack when the subRX is set to AUX input. It makes no difference what the menu says, you must set the menu according to how the K3 is physically connected, so if you do not have the BNC connector plugged to the subRX AUX input, you will not have any input from the BNC connector. The magic is all in the physical setup, and the menu must be set according to that. 73, Don W3FPR On 8/8/2015 10:03 PM, Ignacy wrote: I tried diversity today and something is wrong. KRX3 input (BNC) is not working and KRX3 receives always receives signals from the main RX. In KRX3 menu, Ant=bnc Definitely the diversity was working a couple of month ago. I upgraded to the newest beta, and no change. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
