Alan,
Yes, set the KXPA100 tuner to bypass - switch on the front.
You will be using cabling as shown in Figure 4 page 11 of the KAT500
Owner's manual. The "output on transceiver that provides closure to
ground on transmit" is the RCA jack on the rectangular box in the cable
between the KX3 and the KXPA100.
Note that the RCA cables which provide keying for the amplifier MUST be
routed first through the KAT500 and then to the amplifier - that allows
the KAT500 to disable keying the KPA500 when it is tuning.
73,
Don W3FPR
On 3/5/2018 12:44 PM, Alan Lambert wrote:
A little help / guidance please.
I have a Kx3 w/ Kxpa100 and soon I will be adding a Kpa500 / Kat500 to this mix.
When you add a Kxpa100 to a Kx3 you set the power on the Kx3 from
0-110w. If you click tune on the Kx3 it tunes the tuner in the
kpa100. Full integration
How does all this work once you add the 500?
Once you add the 500 to the mix does the Kx3 now show 0-500? Does the
Kx3 "control" the 500? What is the wiring path for this?
Some of its obvious; the tuners in the KX3 and the KXpa100 will need
to be disabled, RF out of kpa100 to RF in on the 500.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
