Hi Rick,
I did not have the same results as you have described using a hair dryer.
But, I didn't get the results I wanted or expected using a hair dryer based
on process documented in the Elecraft manual. If you can find an
incandescent light bulb (60w is fine) and try that instead of the hair
dryer, I wonder if your results will be different. I had much better
results with the light bulb approach than the hair dryer when doing the KX3
temp compensation procedure.
regards,
Brian
VE3IBW
On Mon, Mar 11, 2019 at 11:15 AM rick jones via Elecraft <
elecraft@mailman.qth.net> wrote:
> So I'm having the same problem as I've read in a few past posts (with no
> resolution). At Approx. 40DegC I lose the signal in the speaker, the S
> meter reads no signal, and the F value starts to wildly swing in the 700
> range. I'm directing my hot air at the heatsink for what that's worth. I
> had it increasing at about 1degC per 1-2 minutes as instructed. I can't
> imagine the procedure is still going ok given those symptoms but maybe it
> is. Any thoughts? Thanks.
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html