Re: [Elecraft] Low Tx Data Sound Output volume

[Bob McGraw K4TAX]

With FLDIGI there are two modes for DATA.  PKTUSB is preferred for all modes 
except where one chooses PKTLSB for AFSK.  The CAT command will handle the 
radio mode switching.  Thus one does not have to turn to the radio and initiate 
the REV mode. 

Bob, K4TAX


Sent from my iPhone

> On Sep 28, 2017, at 5:25 PM, Don Wilhelm  wrote:
> 
> Irwin,
> 
> Did you get the information that Elecraft radios are different than other 
> amateur transceivers?, and that you have to set up the audio and power 
> differently.  It sounds like you may not be setting the audio and power 
> correctly for the K3/K3S.
> 
> The common internet "advice" is to set the power to maximum, and use the 
> audio level to control the power output.  That does not work well with 
> Elecraft transceivers - ignore that advice.
> 
> With the K3 (K3S, KX3 and KX2), set the audio to produce 4 bars on the ALC 
> meter with the 5th bar flashing and adjust the power with the Power knob on 
> the radio.
> 
> AFSK A should be no different than LSB except that compression and TX/RX EQ 
> is automatically turned off.
> 
> For PSK31 or other data modes, the use of DATA A submode (which is USB) is 
> recommended although PSK31 does not care about the sideband.  Other soundcard 
> digital modes do care.
> 
> Please refer to the K3 Data modes article on my website www.w3fpr.com. Scroll 
> the left column down to the bottom and you will find the link to the page.
> 
> 73,
> Don W3FPR
> 
>> On 9/25/2017 11:45 AM, Irwin Darack wrote:
>> I am not sure if this is a Windows 10 problem or something changes in my
>> K3s settings and want to see if others have experienced the same thing?
>> When the K3s is in Tx Data (PSK 31 and RTTY) - AFSK -A LSB, I now find that
>> the data output (sound) is no much lower than when just in LSB mode. This
>> seems to have occurred with the latest Windows 10 update. Hence in this
>> weekends CQWW RTTY contest, I could only use MMTTY with the K3s in LSB mode
>> and not Tx Data mode.  I am not sure if it changed something with the Codec
>> driver or by some fluke, something changes in the K3s settings. Hence, I
>> ran the contest in LSB versus Tx Data.
>> Thanks,
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcg...@blomand.net
> 


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Low Tx Data Sound Output volume

[Don Wilhelm]

Irwin,

Did you get the information that Elecraft radios are different than 
other amateur transceivers?, and that you have to set up the audio and 
power differently.  It sounds like you may not be setting the audio and 
power correctly for the K3/K3S.


The common internet "advice" is to set the power to maximum, and use the 
audio level to control the power output.  That does not work well with 
Elecraft transceivers - ignore that advice.


With the K3 (K3S, KX3 and KX2), set the audio to produce 4 bars on the 
ALC meter with the 5th bar flashing and adjust the power with the Power 
knob on the radio.


AFSK A should be no different than LSB except that compression and TX/RX 
EQ is automatically turned off.


For PSK31 or other data modes, the use of DATA A submode (which is USB) 
is recommended although PSK31 does not care about the sideband.  Other 
soundcard digital modes do care.


Please refer to the K3 Data modes article on my website www.w3fpr.com. 
Scroll the left column down to the bottom and you will find the link to 
the page.


73,
Don W3FPR

On 9/25/2017 11:45 AM, Irwin Darack wrote:

I am not sure if this is a Windows 10 problem or something changes in my
K3s settings and want to see if others have experienced the same thing?

When the K3s is in Tx Data (PSK 31 and RTTY) - AFSK -A LSB, I now find that
the data output (sound) is no much lower than when just in LSB mode. This
seems to have occurred with the latest Windows 10 update. Hence in this
weekends CQWW RTTY contest, I could only use MMTTY with the K3s in LSB mode
and not Tx Data mode.  I am not sure if it changed something with the Codec
driver or by some fluke, something changes in the K3s settings. Hence, I
ran the contest in LSB versus Tx Data.
Thanks,


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Low Tx Data Sound Output volume

[Irwin Darack]

I am not sure if this is a Windows 10 problem or something changes in my
K3s settings and want to see if others have experienced the same thing?

When the K3s is in Tx Data (PSK 31 and RTTY) - AFSK -A LSB, I now find that
the data output (sound) is no much lower than when just in LSB mode. This
seems to have occurred with the latest Windows 10 update. Hence in this
weekends CQWW RTTY contest, I could only use MMTTY with the K3s in LSB mode
and not Tx Data mode.  I am not sure if it changed something with the Codec
driver or by some fluke, something changes in the K3s settings. Hence, I
ran the contest in LSB versus Tx Data.
Thanks,
-- 
Irwin KD3TB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com