Re: [Elecraft] Lp.pan & k3s
Well, I uninstalled the U7 and NaP3 drivers/software, installed a new U7 and re-installed and configured U7 and NaP3 drivers and software. But still no signal. CAT control works, but nothing but background noise on NaP3. Is there a way to test the LP Pan 2 function otherwise? May I should try another SDR app? Bret/N4SRN -- View this message in context: http://elecraft.365791.n2.nabble.com/Lp-pan-k3s-tp7622817p7623010.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Lp.pan & k3s
It was ordered from Telepost for a K3 - no K3S choice so I figured it was the same. Best regards, Bret aka Charles Jessee N4SRN -- Original Message -- From: N8LP [via Elecraft] To: Charles Bret Jessee Sent: September 26, 2016 at 12:46 PM Subject: Re: Lp.pan & k3s Is your LP-PAN 2 set up for K3, ie. does it have the correct xtal? Larry N8LP On 9/26/2016 11:52 AM, [hidden email] wrote: Date: Sat, 24 Sep 2016 14:14:39 -0700 (MST) From: MaverickNH [hidden email] To: [hidden email] Subject: Re: [Elecraft] Lp.pan k3s Message-ID: [hidden email] Content-Type: text/plain; charset=us-ascii As an added note, Ive looked to adjust Line In Levels on the Xonar U7 as per http://www.telepostinc.com/soundcards.html using the Digital Level Meter app. I find that the Elecraft Signal Generator XG3 -73dBm 14.02000 MHz signal shows on my P3 as a -81 dB peak on CW (and I hear it on the K3S headphones), but I find no change in turning the XG3 On/OFF while adjusting the full range of Line In Level on the U7 sound card (dB ranges -33.3 to -27 with or without XG3 signal). If I switch my PC to the U7, I can hear YouTube videos, so I think my U7 is OK. If I run from IF Out on the K3S rather than the P3, still no success, so the P3 IF Out appears to not be the issue. Might be the LP-PAN 2 not be working? Im only more mystified... Bret/N4SRN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto: [hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] If you reply to this email, your message will be added to the discussion below: http://elecraft.365791.n2.nabble.com/Lp-pan-k3s-tp7622817p7622856.html To unsubscribe from Lp.pan k3s, click here . NAML -- View this message in context: http://elecraft.365791.n2.nabble.com/Lp-pan-k3s-tp7622817p7622857.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Lp.pan & k3s
Is your LP-PAN 2 set up for K3, ie. does it have the correct xtal? Larry N8LP On 9/26/2016 11:52 AM, elecraft-requ...@mailman.qth.net wrote: Date: Sat, 24 Sep 2016 14:14:39 -0700 (MST) From: MaverickNH<cbjesse...@comcast.net> To:elecraft@mailman.qth.net Subject: Re: [Elecraft] Lp.pan & k3s Message-ID:<1474751679802-7622838.p...@n2.nabble.com> Content-Type: text/plain; charset=us-ascii As an added note, I've looked to adjust Line In Levels on the Xonar U7 as per http://www.telepostinc.com/soundcards.html using the Digital Level Meter app. I find that the Elecraft Signal Generator XG3 -73dBm 14.02000 MHz signal shows on my P3 as a -81 dB peak on CW (and I hear it on the K3S headphones), but I find no change in turning the XG3 On/OFF while adjusting the full range of Line In Level on the U7 sound card (dB ranges -33.3 to -27 with or without XG3 signal). If I switch my PC to the U7, I can hear YouTube videos, so I think my U7 is OK. If I run from IF Out on the K3S rather than the P3, still no success, so the P3 IF Out appears to not be the issue. Might be the LP-PAN 2 not be working? I'm only more mystified... Bret/N4SRN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Lp.pan & k3s
HiDid you set the xonar for line in with the Asus sound utility?Tomva2fsq.com Sent from my Samsung Galaxy smartphone. Original message From: MaverickNH <cbjesse...@comcast.net> Date: 2016-09-24 5:14 PM (GMT-05:00) To: elecraft@mailman.qth.net Subject: Re: [Elecraft] Lp.pan & k3s As an added note, I've looked to adjust Line In Levels on the Xonar U7 as per http://www.telepostinc.com/soundcards.html using the Digital Level Meter app. I find that the Elecraft Signal Generator XG3 -73dBm 14.02000 MHz signal shows on my P3 as a -81 dB peak on CW (and I hear it on the K3S headphones), but I find no change in turning the XG3 On/OFF while adjusting the full range of Line In Level on the U7 sound card (dB ranges -33.3 to -27 with or without XG3 signal). If I switch my PC to the U7, I can hear YouTube videos, so I think my U7 is OK. If I run from IF Out on the K3S rather than the P3, still no success, so the P3 IF Out appears to not be the issue. Might be the LP-PAN 2 not be working? I'm only more mystified... Bret/N4SRN -- View this message in context: http://elecraft.365791.n2.nabble.com/Lp-pan-k3s-tp7622817p7622838.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to tom...@videotron.ca __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Lp.pan & k3s
As an added note, I've looked to adjust Line In Levels on the Xonar U7 as per http://www.telepostinc.com/soundcards.html using the Digital Level Meter app. I find that the Elecraft Signal Generator XG3 -73dBm 14.02000 MHz signal shows on my P3 as a -81 dB peak on CW (and I hear it on the K3S headphones), but I find no change in turning the XG3 On/OFF while adjusting the full range of Line In Level on the U7 sound card (dB ranges -33.3 to -27 with or without XG3 signal). If I switch my PC to the U7, I can hear YouTube videos, so I think my U7 is OK. If I run from IF Out on the K3S rather than the P3, still no success, so the P3 IF Out appears to not be the issue. Might be the LP-PAN 2 not be working? I'm only more mystified... Bret/N4SRN -- View this message in context: http://elecraft.365791.n2.nabble.com/Lp-pan-k3s-tp7622817p7622838.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Lp.pan & k3s
I've made a PDF on Dropbox with Screen Captures of my settings https://www.dropbox.com/s/1y7mnn3cpf4kukp/16-09-24%20LP%20Pan%20K3S%20P3%20U7.pdf?dl=0 Appreciate advice! Bret/N4SRN -- View this message in context: http://elecraft.365791.n2.nabble.com/Lp-pan-k3s-tp7622817p7622832.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Lp.pan & k3s
I was hoping that was my problem, but not so easy. I can't seem to get signal from the P3 to appear on my NaP3 install. I'll post my settings and ask for some advice. Best regards, Bret aka Charles Jessee N4SRN -- Original Message -- From: Mark E. Musick [via Elecraft] To: Charles Bret Jessee Sent: September 23, 2016 at 8:43 PM Subject: Re: Lp.pan & k3s And dont forget to turn the IF OUT switch on the P3 from OFF to ON. Dont ask how I know. Mark, WB9CIF -Original Message- From: Elecraft [mailto: [hidden email] ] On Behalf Of Don Wilhelm Sent: Friday, September 23, 2016 11:08 PM To: MaverickNH [hidden email] ; [hidden email] Subject: Re: [Elecraft] Lp.pan k3s Bret and Paul, If you have the P3, connect the LP-Pan to the IF OUT on the P3. If you have only the K3 (K3S), connect LP-Pan directly to the IF output of the K3. The rest of the story is related to LP-Pan and your soundcard and your computer and the computer applications and is appropriate discussion on the LP-Pan Yahoo group. There is a lot of setup information at Larrys website www.telepostinc.com. 73, Don W3FPR On 9/23/2016 5:41 PM, MaverickNH wrote: Hi Paul, I was just getting around to asking the same question and wonder if we might merge efforts? I have a K3S and P3 with a new LP-PAN 2, hoping to get it working with a ASUS Xonar U7 external sound card and NaP3 software. From there, on to LP-Bridge and CW Skimmer. But if you have other hardware/software thoughts, Ill hold off. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto: [hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto: [hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] If you reply to this email, your message will be added to the discussion below: http://elecraft.365791.n2.nabble.com/Lp-pan-k3s-tp7622817p7622821.html To unsubscribe from Lp.pan k3s, click here . NAML -- View this message in context: http://elecraft.365791.n2.nabble.com/Lp-pan-k3s-tp7622817p7622822.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Lp.pan & k3s
And don't forget to turn the IF OUT switch on the P3 from OFF to ON. Don't ask how I know. Mark, WB9CIF -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm Sent: Friday, September 23, 2016 11:08 PM To: MaverickNH <cbjesse...@comcast.net>; elecraft@mailman.qth.net Subject: Re: [Elecraft] Lp.pan & k3s Bret and Paul, If you have the P3, connect the LP-Pan to the IF OUT on the P3. If you have only the K3 (K3S), connect LP-Pan directly to the IF output of the K3. The "rest of the story" is related to LP-Pan and your soundcard and your computer and the computer applications and is appropriate discussion on the LP-Pan Yahoo group. There is a lot of setup information at Larry's website www.telepostinc.com. 73, Don W3FPR On 9/23/2016 5:41 PM, MaverickNH wrote: > Hi Paul, > > I was just getting around to asking the same question and wonder if we > might merge efforts? I have a K3S and P3 with a new LP-PAN 2, hoping > to get it working with a ASUS Xonar U7 external sound card and NaP3 > software. From there, on to LP-Bridge and CW Skimmer. But if you have > other hardware/software thoughts, I'll hold off. > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to markmus...@sbcglobal.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Lp.pan & k3s
Bret and Paul, If you have the P3, connect the LP-Pan to the IF OUT on the P3. If you have only the K3 (K3S), connect LP-Pan directly to the IF output of the K3. The "rest of the story" is related to LP-Pan and your soundcard and your computer and the computer applications and is appropriate discussion on the LP-Pan Yahoo group. There is a lot of setup information at Larry's website www.telepostinc.com. 73, Don W3FPR On 9/23/2016 5:41 PM, MaverickNH wrote: Hi Paul, I was just getting around to asking the same question and wonder if we might merge efforts? I have a K3S and P3 with a new LP-PAN 2, hoping to get it working with a ASUS Xonar U7 external sound card and NaP3 software. From there, on to LP-Bridge and CW Skimmer. But if you have other hardware/software thoughts, I'll hold off. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Lp.pan & k3s
Hi Paul, I was just getting around to asking the same question and wonder if we might merge efforts? I have a K3S and P3 with a new LP-PAN 2, hoping to get it working with a ASUS Xonar U7 external sound card and NaP3 software. From there, on to LP-Bridge and CW Skimmer. But if you have other hardware/software thoughts, I'll hold off. Bret/N4SRN -- View this message in context: http://elecraft.365791.n2.nabble.com/Lp-pan-k3s-tp7622817p7622818.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Lp.pan & k3s
Hi all I have just aquired an lp pan interface but with no cables which is no big deal as I should have plenty around the shack but I'm not sure how to connect it to the radio. I see plenty of info on the net for connection between k3. So hope someone can point me in the right direction as to what I need for connecting to k3s. And also any advice on software. Mny tks Paul gm0bkc __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com