Re: [Elecraft] New K3S in the RTTY Contest

[Nr4c]

My K3S fans are quiet. But I lit up the fan in my KPA500 today running 500 
watts running RTTY. But noted that as soon as the fan hit high, the temp 
started down. So it works well.  Amp did great. Almost 100% return on calls. 

Sent from my iPhone
...nr4c. bill


> On Feb 14, 2016, at 10:17 PM, Irwin Darack  wrote:
> 
> Ran a new K3S that I just built in the RTTY contest this weekend. Mostly
> S with some minor runs. Kept the power to 70w. K3S fans never came on. If
> they did, they were really quiet. Probably could have put the power
> higher. Only the fan in my older P/S ocassionally came on. It was a good
> way to break in the new radio and run it through its paces. Used the P3 to
> find the stations and the CWT on the rig to fine tune them. Transmit
> monitor let me keep an eye on my signal. Used a 400hz roofing filter to dig
> out the close ones on a crowded band. Set the K3S to TX Data ( AFSK A -
> LSB). For TX Data set the Mic Sel to Line in, no VOX. This let me use the
> new USB Codec sound card and key the rig at the same time with N1MM+ and
> MMTTY. Really pleased with the performance.
> 
> Irwin KD3TB
> 
> 
> -- 
> Irwin KD3TB
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@widomaker.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] New K3S in the RTTY Contest

[Irwin Darack]

Ran a new K3S that I just built in the RTTY contest this weekend. Mostly
S with some minor runs. Kept the power to 70w. K3S fans never came on. If
they did, they were really quiet. Probably could have put the power
higher. Only the fan in my older P/S ocassionally came on. It was a good
way to break in the new radio and run it through its paces. Used the P3 to
find the stations and the CWT on the rig to fine tune them. Transmit
monitor let me keep an eye on my signal. Used a 400hz roofing filter to dig
out the close ones on a crowded band. Set the K3S to TX Data ( AFSK A -
LSB). For TX Data set the Mic Sel to Line in, no VOX. This let me use the
new USB Codec sound card and key the rig at the same time with N1MM+ and
MMTTY. Really pleased with the performance.

Irwin KD3TB


-- 
Irwin KD3TB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com