After returning from a contest operation at KS5Z this past weekend, my P3 would not turn on when I applied 12VDC. I checked the jumper and it was in the correct place. I moved and returned the jumper to 2-3 with no change. Re-loading the firmware did not help.
I performed a parameter initialization to no avail. I reloaded the current firmware (which was installed prior to the parameter initialization--no change. Restoring the previous configuration didn't change anything. Has anyone else noticed this anomaly? If so, were you able to return your P3 to "normal" operation where applying 12VDC put it into operation? I really like the idea of power on with 12VDC applied! I use this with an APP distribution panel that turns on the P3 and KAT500 when I turn on the K3. The next step is to power on the KPA500 at the same time. -- 73, Bill, K8TE -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
