Re: [Elecraft] P3 SVGA - Spurious Spike
There was also a problem with the BNC cable feeding the P3. I experienced that and merely changed to a mil spec cable. That cured the problem. No idea what caused the problem, but that cured it. Bill W2BLC K-Line __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] P3 SVGA - Spurious Spike
Hi Ted, Do an archive search for the string: SVGA ribbon cable Review the posts and see if they bear any similarity to what you are now experiencing. I think the gist of the thread was that placement of the ribbon cable could be the cause of spurious spikes. 73, Mike K2MK Dauer, Edward wrote > Just installed the SVGA option in the P3 and have an odd spike appearing > on the screen. Any help would be appreciated. Here are the symptoms: > > The spike appears at 11.8 KHz above the VFO A frequency, and stays at that > distance as VFO A is tuned - that is, it moves as VFO A moves. It appears > on 10, 15, 20, and 40 meters (haven¹t tried others). The apparent > amplitude is over S9. > > But there is no signal there - tuning across the spike¹s frequency with > the SubRX produces nothing audible in the K3. > > The spike disappears when SVGA EN is set to OFF. > > The spook appears although there is no SVGA monitor connected, and no > computer connected to anything, so it¹s not from some other box. Seems to > be residing in the P3. Did not occur before the SVGA option was > installed. > > Firmware in both the K3 and the P3 and its SVGA are current as of > yesterday - but the anomaly appeared both before and after the updates, > and before and after the synths were changed. > > Any ideas or suggestions? Thanks! > > Ted, KN1CBR -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-SVGA-Spurious-Spike-tp7599941p7599947.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] P3 SVGA - Spurious Spike
Just installed the SVGA option in the P3 and have an odd spike appearing on the screen. Any help would be appreciated. Here are the symptoms: The spike appears at 11.8 KHz above the VFO A frequency, and stays at that distance as VFO A is tuned - that is, it moves as VFO A moves. It appears on 10, 15, 20, and 40 meters (haven¹t tried others). The apparent amplitude is over S9. But there is no signal there - tuning across the spike¹s frequency with the SubRX produces nothing audible in the K3. The spike disappears when SVGA EN is set to OFF. The spook appears although there is no SVGA monitor connected, and no computer connected to anything, so it¹s not from some other box. Seems to be residing in the P3. Did not occur before the SVGA option was installed. Firmware in both the K3 and the P3 and its SVGA are current as of yesterday - but the anomaly appeared both before and after the updates, and before and after the synths were changed. Any ideas or suggestions? Thanks! Ted, KN1CBR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com