OM,
It looks to me like occasional bytes are getting lost for some reason on
the serial interface to the PC. Make sure there is no other software
running on the computer that might access that serial port and interfere
with the image transfer. If not, then it sounds like a hardware problem
of some kind on the RS-232.
Alan N1AL
On 12/09/2013 01:14 PM, Sam Morgan wrote:
My P3 and it's ability to take screen snapshots have been working fine
for 2-3 years. I installed the SVGA board earlier this year and it also
does screen captures just fine.
The problem is now when I try to take a screen snapshot using the P3
utility (version 1.13.1.23) I am getting jagged images.
You can go here to see an image of what I mean:
https://picasaweb.google.com/k5oai.sam/P3
An SVGA snapshots saved to a USB stick are just fine, with no jagged
screen segments.
I have reset the P3, I have rebooted the computer, I have checked the
connections to be sure they are tight. Connections are Serial, not USB
to Serial. Before I go digging around for a new serial cable or tearing
down everything trying to trouble shoot this. I wonder if anyone else
has run into this problem and might have a clue where I need to look for
the problem?
I haven't done anything, that I can think of, that might have caused
this change. I know I had some good screen shots taken from before, in
the last month at least.
TIA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
