Re: [Elecraft] PX3 computer interface to KX3

2018-04-27 Thread Nr4c 
But it doesn’t the P3 talks to the K3 at 38,400.  Weird things can happen when 
mixing nauseates. Why ask for trouble. 

BTW: My K3S came defaulted to 38,400. 

I think the 4800 on the K3 was a carryover from K2 days. 

Sent from my iPhone
...nr4c. bill


> On Apr 27, 2018, at 4:16 PM, John Merrill  wrote:
> 
> Good news. I run all my Elecraft stuff at 38400. But if 9600 works why change 
> :-).
> 
> 73, John N1JM
> 
>> On Apr 27, 2018, at 1:14 PM, Bill Frantz  wrote:
>> 
>> Bingo! It had been reset from 38400 to 9600. I have no idea how or when. 
>> Thanks for the clue.
>> 
>> 73 Bill AE6JV
>> 
>> (BTW, did I say that I hate RS232. With all the parameters that can go 
>> wrong, and many strange voltage conventions, it seems to be an interface 
>> designed to cause problems.)
>> 
>>> On 4/26/18 at 9:19 PM, johnn...@gmail.com (John_N1JM) wrote:
>>> 
>>> Is the *host serial port baud rate* set correctly in the PX3?
>>> 
>>> John N1JM
>>> 
>>> 
>>> Bill Frantz wrote
 I'm sitting in New Hampshire and I find I can't get my computer to talk to 
 the KX3 when it goes through the PX3 using the ACC1-PC jack. The computer 
 can talk to the KX3 when plugged in directly to ACC1 jack on the KX3, and 
 the PX3 can get the frequency data when plugged into the same jack.
 
 I have the same problem with both wsjt-x and RUMlogNG, so I don't think 
 the problem is in the computer software. The USB <--> RS232 seems to be 
 working, so I suspect the PX3.
 
 Does anyone have any suggestions for something to fix to get both the 
 computer and the PX3 to talk to the KX3? (I'm low on test equipment here, 
 but I do have a DVM.)
>> -
>> Bill Frantz| Airline peanut bag: "Produced  | Periwinkle
>> (408)356-8506  | in a facility that processes   | 16345 Englewood Ave
>> www.pwpconsult.com | peanuts and other nuts." - Duh | Los Gatos, CA 95032
>> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@widomaker.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] PX3 computer interface to KX3

2018-04-27 Thread John Merrill 
Good news. I run all my Elecraft stuff at 38400. But if 9600 works why change 
:-).

73, John N1JM

> On Apr 27, 2018, at 1:14 PM, Bill Frantz  wrote:
> 
> Bingo! It had been reset from 38400 to 9600. I have no idea how or when. 
> Thanks for the clue.
> 
> 73 Bill AE6JV
> 
> (BTW, did I say that I hate RS232. With all the parameters that can go wrong, 
> and many strange voltage conventions, it seems to be an interface designed to 
> cause problems.)
> 
> On 4/26/18 at 9:19 PM, johnn...@gmail.com (John_N1JM) wrote:
> 
>> Is the *host serial port baud rate* set correctly in the PX3?
>> 
>> John N1JM
>> 
>> 
>> Bill Frantz wrote
>>> I'm sitting in New Hampshire and I find I can't get my computer to talk to 
>>> the KX3 when it goes through the PX3 using the ACC1-PC jack. The computer 
>>> can talk to the KX3 when plugged in directly to ACC1 jack on the KX3, and 
>>> the PX3 can get the frequency data when plugged into the same jack.
>>> 
>>> I have the same problem with both wsjt-x and RUMlogNG, so I don't think the 
>>> problem is in the computer software. The USB <--> RS232 seems to be 
>>> working, so I suspect the PX3.
>>> 
>>> Does anyone have any suggestions for something to fix to get both the 
>>> computer and the PX3 to talk to the KX3? (I'm low on test equipment here, 
>>> but I do have a DVM.)
> -
> Bill Frantz| Airline peanut bag: "Produced  | Periwinkle
> (408)356-8506  | in a facility that processes   | 16345 Englewood Ave
> www.pwpconsult.com | peanuts and other nuts." - Duh | Los Gatos, CA 95032
> 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] PX3 computer interface to KX3

2018-04-27 Thread Bill Frantz 
Bingo! It had been reset from 38400 to 9600. I have no idea how 
or when. Thanks for the clue.


73 Bill AE6JV

(BTW, did I say that I hate RS232. With all the parameters that 
can go wrong, and many strange voltage conventions, it seems to 
be an interface designed to cause problems.)


On 4/26/18 at 9:19 PM, johnn...@gmail.com (John_N1JM) wrote:


Is the *host serial port baud rate* set correctly in the PX3?

John N1JM


Bill Frantz wrote
I'm sitting in New Hampshire and I find I can't get my 
computer to talk to the KX3 when it goes through the PX3 using 
the ACC1-PC jack. The computer can talk to the KX3 when 
plugged in directly to ACC1 jack on the KX3, and the PX3 can 
get the frequency data when plugged into the same jack.


I have the same problem with both wsjt-x and RUMlogNG, so I 
don't think the problem is in the computer software. The USB 
<--> RS232 seems to be working, so I suspect the PX3.


Does anyone have any suggestions for something to fix to get 
both the computer and the PX3 to talk to the KX3? (I'm low on 
test equipment here, but I do have a DVM.)

-
Bill Frantz| Airline peanut bag: "Produced  | Periwinkle
(408)356-8506  | in a facility that processes   | 16345 
Englewood Ave
www.pwpconsult.com | peanuts and other nuts." - Duh | Los Gatos, 
CA 95032


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] PX3 computer interface to KX3

2018-04-27 Thread Nr4c 
Set all bauds to 38,400. 



Sent from my iPhone
...nr4c. bill


> On Apr 26, 2018, at 10:19 PM, John_N1JM  wrote:
> 
> Is the *host serial port baud rate* set correctly in the PX3?
> 
> John N1JM
> 
> 
> Bill Frantz wrote
>> I'm sitting in New Hampshire and I find I can't get my computer 
>> to talk to the KX3 when it goes through the PX3 using the 
>> ACC1-PC jack. The computer can talk to the KX3 when plugged in 
>> directly to ACC1 jack on the KX3, and the PX3 can get the 
>> frequency data when plugged into the same jack.
>> 
>> I have the same problem with both wsjt-x and RUMlogNG, so I 
>> don't think the problem is in the computer software. The USB 
>> <--> RS232 seems to be working, so I suspect the PX3.
>> 
>> Does anyone have any suggestions for something to fix to get 
>> both the computer and the PX3 to talk to the KX3? (I'm low on 
>> test equipment here, but I do have a DVM.)
>> 
>> Thanks - Bill AE6JV
>> 
>> ---
>> Bill Frantz| Concurrency is hard. 12 out  | Periwinkle
>> (408)356-8506  | 10 programmers get it wrong. | 16345 
>> Englewood Ave
>> www.pwpconsult.com |- Jeff Frantz | Los Gatos, 
>> CA 95032
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:
> 
>> Elecraft@.qth
> 
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to 
> 
>> lists+1215531472858-365791@.nabble
> 
> 
> 
> 
> 
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@widomaker.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] PX3 computer interface to KX3

2018-04-26 Thread John_N1JM 
Is the *host serial port baud rate* set correctly in the PX3?

John N1JM


Bill Frantz wrote
> I'm sitting in New Hampshire and I find I can't get my computer 
> to talk to the KX3 when it goes through the PX3 using the 
> ACC1-PC jack. The computer can talk to the KX3 when plugged in 
> directly to ACC1 jack on the KX3, and the PX3 can get the 
> frequency data when plugged into the same jack.
> 
> I have the same problem with both wsjt-x and RUMlogNG, so I 
> don't think the problem is in the computer software. The USB 
> <--> RS232 seems to be working, so I suspect the PX3.
> 
> Does anyone have any suggestions for something to fix to get 
> both the computer and the PX3 to talk to the KX3? (I'm low on 
> test equipment here, but I do have a DVM.)
> 
> Thanks - Bill AE6JV
> 
> ---
> Bill Frantz| Concurrency is hard. 12 out  | Periwinkle
> (408)356-8506  | 10 programmers get it wrong. | 16345 
> Englewood Ave
> www.pwpconsult.com |- Jeff Frantz | Los Gatos, 
> CA 95032
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:

> Elecraft@.qth

> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to 

> lists+1215531472858-365791@.nabble





--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] PX3 computer interface to KX3

2018-04-26 Thread Bill Frantz 
I'm sitting in New Hampshire and I find I can't get my computer 
to talk to the KX3 when it goes through the PX3 using the 
ACC1-PC jack. The computer can talk to the KX3 when plugged in 
directly to ACC1 jack on the KX3, and the PX3 can get the 
frequency data when plugged into the same jack.


I have the same problem with both wsjt-x and RUMlogNG, so I 
don't think the problem is in the computer software. The USB 
<--> RS232 seems to be working, so I suspect the PX3.


Does anyone have any suggestions for something to fix to get 
both the computer and the PX3 to talk to the KX3? (I'm low on 
test equipment here, but I do have a DVM.)


Thanks - Bill AE6JV

---
Bill Frantz| Concurrency is hard. 12 out  | Periwinkle
(408)356-8506  | 10 programmers get it wrong. | 16345 
Englewood Ave
www.pwpconsult.com |- Jeff Frantz | Los Gatos, 
CA 95032


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com