Re: [Elecraft] Rear panel mike jack
Hi Dennis, I replaced mine a few years back with Switchcraft jacks from Mouser. Unfortunately, I can't find any record of which part(s) I used. Looking at the Mouser site, I believe this is the Switchcraft series: https://www.mouser.com/datasheet/2/393/35rapc__hn2_cd-475095.pdf Just check dimensions to verify it's the right part and order the correct pin configuration (mono, stereo, switched or unswitched). Hope that helps. 73, Josh W6XU On 4/27/2020 3:37 AM, Dennis W1UE wrote: I have a K3 with a rear panel mike jack and the rear panel Line Out jack that have become intermittent. I can find the Line Out jack on the Elecraft website, but not the Mike input jack. Are they the same part number? For that matter, are all those jacks the same part number? And is there a replacement that can be purchased from Mouser or other supplier? Dennis W1UE __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Rear Panel Mike Jack
Dennis, I had the same problem with the line out jack. Spraying contact cleaner on a plug and working it around didn't help; one channel was open. You need to replace the whole board unless you want a huge task. Find someone who has upgraded his K-3 to a K-3s. He will probably have the old board to give you. It's the KIO3 I/O audio module. Most likely someone seeing this message can help. Jim W6YA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Rear panel mike jack
I have a K3 with a rear panel mike jack and the rear panel Line Out jack that have become intermittent. I can find the Line Out jack on the Elecraft website, but not the Mike input jack. Are they the same part number? For that matter, are all those jacks the same part number? And is there a replacement that can be purchased from Mouser or other supplier? Dennis W1UE __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com