Re: [Elecraft] axt1 tripod
I have an XIT Photo XT57TRS tripod that I use with the AXT1 with the AX1. With the removable plate it seems to work well : https://imgur.com/a/dIaXvZl -eric On Tue, Mar 31, 2020 at 5:57 PM Walter Underwood wrote: > Tripod screws are 1/4-20, so an angle bracket and a screw and a wingnut > could help. Tilt the head over 90º. > > I did something similar to attach a Nagoya NMO base station mount to a > tripod. > > Photos and description here. I’ve since replaced the hex nut with a > wingnut. > > > https://observer.wunderwood.org/2018/07/08/using-a-mobile-antenna-as-a-temporary-base-antenna/ > > wunder > K6WRU > Walter Underwood > CM87wj > http://observer.wunderwood.org/ (my blog) > > > On Mar 31, 2020, at 5:49 PM, Jay Rutherford wrote: > > > > I raised this issue after getting my AX1 with tripod adaptor, since it > fit neither of my consumer tripods. You need either a really small tripod > head or a adjustable ball-type adapter that elevates the AX1 up enough to > use the BNC plug to the radio. > > > > Here is a link to one small ball head adapter from Amazon: > > > > AKOAK 1/4" Swivel Mini Ball Head Screw Tripod Mount for DSLR Camera > Camcorder Light Bracket > > 4.4 out of 5 stars > > > > I hope this helps. > > > > 73 Jay K3BH > > > > > > On Tue, Mar 31, 2020, at 18:16, rwwatson wrote: > >> Hello list, > >> I now almost have everything I need for my kx3 portable setup. I want > to use > >> the ax1 with an axt1 adapter and my tripod has a removable camera plate > >> which seems to prevent the coax from attaching to the axt1. any > suggestions > >> on a good tripod. > >> > >> > >> > >> -- > >> Sent from: http://elecraft.365791.n2.nabble.com/ > >> __ > >> Elecraft mailing list > >> Home: http://mailman.qth.net/mailman/listinfo/elecraft > >> Help: http://mailman.qth.net/mmfaq.htm > >> Post: mailto:Elecraft@mailman.qth.net > >> > >> This list hosted by: http://www.qsl.net > >> Please help support this email list: http://www.qsl.net/donate.html > >> Message delivered to k...@arrl.net > >> > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to wun...@wunderwood.org > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to garn...@gmail.com -- --Eric _ Eric Garner __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] axt1 tripod
Tripod screws are 1/4-20, so an angle bracket and a screw and a wingnut could help. Tilt the head over 90º. I did something similar to attach a Nagoya NMO base station mount to a tripod. Photos and description here. I’ve since replaced the hex nut with a wingnut. https://observer.wunderwood.org/2018/07/08/using-a-mobile-antenna-as-a-temporary-base-antenna/ wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On Mar 31, 2020, at 5:49 PM, Jay Rutherford wrote: > > I raised this issue after getting my AX1 with tripod adaptor, since it fit > neither of my consumer tripods. You need either a really small tripod head or > a adjustable ball-type adapter that elevates the AX1 up enough to use the BNC > plug to the radio. > > Here is a link to one small ball head adapter from Amazon: > > AKOAK 1/4" Swivel Mini Ball Head Screw Tripod Mount for DSLR Camera Camcorder > Light Bracket > 4.4 out of 5 stars > > I hope this helps. > > 73 Jay K3BH > > > On Tue, Mar 31, 2020, at 18:16, rwwatson wrote: >> Hello list, >> I now almost have everything I need for my kx3 portable setup. I want to use >> the ax1 with an axt1 adapter and my tripod has a removable camera plate >> which seems to prevent the coax from attaching to the axt1. any suggestions >> on a good tripod. >> >> >> >> -- >> Sent from: http://elecraft.365791.n2.nabble.com/ >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to k...@arrl.net >> > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to wun...@wunderwood.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] axt1 tripod
I raised this issue after getting my AX1 with tripod adaptor, since it fit neither of my consumer tripods. You need either a really small tripod head or a adjustable ball-type adapter that elevates the AX1 up enough to use the BNC plug to the radio. Here is a link to one small ball head adapter from Amazon: AKOAK 1/4" Swivel Mini Ball Head Screw Tripod Mount for DSLR Camera Camcorder Light Bracket 4.4 out of 5 stars I hope this helps. 73 Jay K3BH On Tue, Mar 31, 2020, at 18:16, rwwatson wrote: > Hello list, > I now almost have everything I need for my kx3 portable setup. I want to use > the ax1 with an axt1 adapter and my tripod has a removable camera plate > which seems to prevent the coax from attaching to the axt1. any suggestions > on a good tripod. > > > > -- > Sent from: http://elecraft.365791.n2.nabble.com/ > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to k...@arrl.net > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] axt1 tripod
I made an adapter I uses a flat aluminum bar with a hole drilled and tapped for the camera mount and then another hole with dnc adapter for coax and antenna. Make short as possible fron tripod. Bill WF9M > On March 31, 2020 at 5:16 PM rwwatson mailto:richard.watson15...@gmail.com > wrote: > > > Hello list, > I now almost have everything I need for my kx3 portable setup. I want to > use > the ax1 with an axt1 adapter and my tripod has a removable camera plate > which seems to prevent the coax from attaching to the axt1. any > suggestions > on a good tripod. > > > > -- > Sent from: http://elecraft.365791.n2.nabble.com/ > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to 1lasports...@cox.net mailto:1lasports...@cox.net > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] axt1 tripod
Hello list, I now almost have everything I need for my kx3 portable setup. I want to use the ax1 with an axt1 adapter and my tripod has a removable camera plate which seems to prevent the coax from attaching to the axt1. any suggestions on a good tripod. -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com