Re: [Elecraft] k3 split/ delta F ?
Ah Yes.. So it's nearly there. Just a bit more code to allow the delta F to be displayed for VFO B when Split is selected :-) 73 Stewart G3RXQ On Thu, 03 Jul 2008 09:39:12 -0700, Brett Howard wrote: > You can display the RIT offset using the disp menu feature while tech md > is on. Then you can see the delta F in place of the VFO B. The only > downside is that you have to use the small knob to set y our delta f. > > > On Thu, 2008-07-03 at 12:41 +0100, Stewart Baker wrote: >> As far as I can see it is not possible at present. It is fairly >> high on my "should be quick to implement" wish list :-) >> >> 73 >> Stewart G3RXQ >> On Thu, 3 Jul 2008 04:22:59 -0700 (PDT), K3KO wrote: >> >>> Anybody figure out if it is possible to display a delta F value >> instead of >>> the actual VFO B frequency when in split? >>> >>> I've found that delta F is quite useful. The actual frequency, >> in practice, >>> is irrelevant in most split cases. >>> >>> Made a couple split contacts now on CW. I like the fact that >> bset stays on >>> so one can tune without having to hold it down continuously -- >> like some >>> Kenwoods and ICOM's require. >>> >>> 73 de Brian/K3KO >>> >> >> ___ >> Elecraft mailing list >> Post to: Elecraft@mailman.qth.net >> You must be a subscriber to post to the list. >> Subscriber Info (Addr. Change, sub, unsub etc.): >> http://mailman.qth.net/mailman/listinfo/elecraft >> >> Help: http://mailman.qth.net/subscribers.htm >> Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] k3 split/ delta F ?
You can display the RIT offset using the disp menu feature while tech md is on. Then you can see the delta F in place of the VFO B. The only downside is that you have to use the small knob to set y our delta f. On Thu, 2008-07-03 at 12:41 +0100, Stewart Baker wrote: > As far as I can see it is not possible at present. It is fairly > high on my "should be quick to implement" wish list :-) > > 73 > Stewart G3RXQ > On Thu, 3 Jul 2008 04:22:59 -0700 (PDT), K3KO wrote: > > > > Anybody figure out if it is possible to display a delta F value > instead of > > the actual VFO B frequency when in split? > > > > I've found that delta F is quite useful. The actual frequency, > in practice, > > is irrelevant in most split cases. > > > > Made a couple split contacts now on CW. I like the fact that > bset stays on > > so one can tune without having to hold it down continuously -- > like some > > Kenwoods and ICOM's require. > > > > 73 de Brian/K3KO > > > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] k3 split/ delta F ?
As far as I can see it is not possible at present. It is fairly high on my "should be quick to implement" wish list :-) 73 Stewart G3RXQ On Thu, 3 Jul 2008 04:22:59 -0700 (PDT), K3KO wrote: > > Anybody figure out if it is possible to display a delta F value instead of > the actual VFO B frequency when in split? > > I've found that delta F is quite useful. The actual frequency, in practice, > is irrelevant in most split cases. > > Made a couple split contacts now on CW. I like the fact that bset stays on > so one can tune without having to hold it down continuously -- like some > Kenwoods and ICOM's require. > > 73 de Brian/K3KO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] k3 split/ delta F ?
Anybody figure out if it is possible to display a delta F value instead of the actual VFO B frequency when in split? I've found that delta F is quite useful. The actual frequency, in practice, is irrelevant in most split cases. Made a couple split contacts now on CW. I like the fact that bset stays on so one can tune without having to hold it down continuously -- like some Kenwoods and ICOM's require. 73 de Brian/K3KO -- View this message in context: http://www.nabble.com/k3-split--delta-F---tp18257121p18257121.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
