RE: [Elecraft] Control board mod with KAT2 and KAT100
-Original Message- just read the manual for the KAT100. It states to remove C44 on K2 control board before using KAT100. OK. How does this affect the use of the K2 without the KAT100, with KAT2? -- C44 is explained in the following alert from Elecraft: http://www.elecraft.com/Apps/Alert19.html I believe it was only there for a few K2's around serial # 3000 (maybe 3000-3077). If that is correct, you will probably not find it in your K2. But anyway, no K2 should have it regardless of power output and antenna tuner. 73 Sverre LA3ZA http://www.qsl.net/la3za/ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Control board mod with KAT2 and KAT100
Gerhard, Control Board C44 is not used on the newer K2s (it was only used on SN 3000 thru 3077 and may have been added to some lower serial numbered K2s). It should be removed if C44 is present on your K2. See Elecraft Builder Alert #19. All will be fine with your QRP tuner. 73, Don W3FPR - Original Message - just read the manual for the KAT100. It states to remove C44 on K2 control board before using KAT100. OK. How does this affect the use of the K2 without the KAT100, with KAT2? You see, I want to switch covers from qrp to qro :-) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
