Yes, I can toggle AGC on and off. No S-meter when on. I have also gone thru
the troubleshooting section of the manual. All is within reasonable parameters.
Q1 & Q2 test good. I have checked the path back to U1 pin 2 on the front panel.
The S on Q1 stays at +1volt no matter if AGC is on or off. Voltage on cathode
of D2 on RF board is .75 when AGC is on and zero when AGC is off. I have
rechecked the component assembly of the front panel and it is correct.
Dan, W8KMX
Get Outlook for iOS<https://aka.ms/o0ukef>
From: Mike Morrow
Sent: Monday, March 6, 2023 7:21:01 AM
To: w8kmx ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K-1 trouble shooting
Have you verified K1 MENU item AGC is toggled to ON? AGC ON is required for
the S-meter to function. See last page of K1 manual for quick reference.
FWIW, almost NO Elecraft model designation uses hyphens or dashes. :-)
Mike / KK5F
-Original Message-
From: w8kmx
Sent: Mar 5, 2023 5:00 PM
I obtained a K-1 partially assembled. I completed assembly. All seems to work
except there is no AGC nor S meter.I have measured voltages per the manual and
checked components but I can't find problem. Any suggestions?Dan, W8KMX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com