Thanks to Bill,Greg, Kevin, Roger and maybe others.
Yes I had lost the VOX setting.
But CW stilled worked in SSB mode. That confused me.
Thanks to all.
73, Ty, W1TF
--- On Sat, 10/18/08, Kevin Rock [EMAIL PROTECTED] wrote:
From: Kevin Rock [EMAIL PROTECTED]
Subject: Re: [Elecraft] K3/100 no pwr out in CW mode
To: [EMAIL PROTECTED]
Date: Saturday, October 18, 2008, 3:05 PM
Hi Ty,
Check your VOX setting. CW and VOX are tied together
for some silly reason. Early on I set VOX to off and could
not send CW. I had to get out the manual and dig for it but
finally found that was the reason for no CW output.
73,
Kevin.
-Original Message-
From: Ralph Tyrrell [EMAIL PROTECTED]
Sent: Oct 18, 2008 12:18 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] K3/100 no pwr out in CW mode
K3/100 #696, 02.38 -- 01.90
Last evening I had a nice QSO with 3 other statons on
60M.
This morning I have no output power in CW mode, in SSB
all is normal all bands, including CW when I hit the key.
(I had set CONFIG:CW WGHT to SSB+CW some time ago and
it works.)
Just no output when mode is set to CW now.
I had set PF1 to switch SPKR+PH on and off. Works FB.
Since then I have had CW QSOs on 80,40 and 30M.
Then had the 60M QSOs, now no output in CW mode.
I went thru the CONFIG list and did not find anything
wrong. Must be missing something.
Help,
Thanks, Ty, W1TF
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com