Re: [Elecraft] KXPA100 antenna port selection from KX3

2015-08-02 Thread Cady, Fred
Fire up the KXPA100 Utility and check the Antenna configuration page.  In that 
page you can choose to allocate different bands to different antenna ports.  
For those with no antennas on ANT2, say, it is a good strategy to inactivate 
all bands for ANT2 to avoid selecting that accidently and transmitting into an 
open.  You might have that situation.
Cheers and 73,
Fred
KE7X

Author of:
The Elecraft K3: Design, Configuration and Operation 2nd ed
The Elecraft KX3 - Going for the summit
The Elecraft KPA500 and KAT500 - the K-Line Dream Station
Printed, coil bound copies of these are all available at www.elecraft.com
KPA500 and KAT500 Quick Set Up Guide
http://www.ke7x.com/home/k-line-introduction-and-set-up-guide

KAT500 and KXPA500 Tuner Operation
http://www.ke7x.com/home/kat500-and-kxpa100-tuners

The Elecraft KXPA100, PX3 and 2M/4M Transverters - Assembling the KX3-Line 
Station available at www.lulu.com.

The Elecraft K3S and P3  and a 3rd Edition of the K3 book with K3S upgrade 
parts are works in progress.

 -Original Message-
 From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
 Gee
 Sent: Sunday, August 02, 2015 11:11 AM
 To: elecraft@mailman.qth.net
 Subject: [Elecraft] KXPA100 antenna port selection from KX3
 
 Cannot get the KX3 ANT select button to change antenna ports on the
 KXPA100. The KX3 display acknowledges ANT button push by displaying the
 inactive port but reverts to normal when display goes back to normal.
 Running latest firmware on the KX3.
 
 Any ideas?
 
 
 
 Sent from my iPad
 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 Message delivered to fc...@ece.montana.edu
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] KXPA100 antenna port selection from KX3

2015-08-02 Thread Dick Dievendorff
Could one of the KXPA100 antenna ports be disabled on that band?

The KXPA Utility, configuration menu, Edit Configuration lets you enable or
disable ANT1 or ANT2  by band.  

73 de Dick, K6KR

-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gee
Sent: Sunday, August 02, 2015 10:11 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KXPA100 antenna port selection from KX3

Cannot get the KX3 ANT select button to change antenna ports on the KXPA100.
The KX3 display acknowledges ANT button push by displaying the inactive port
but reverts to normal when display goes back to normal. Running latest
firmware on the KX3. 

Any ideas?



Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to d...@elecraft.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com