Re: [Elecraft] PSK-31 Decoding
If you have it set to "PSK D" Text Decode ON with a threshold of 3 or 4 or so and then get near a signal I find Auto Spot does a good job of tuning it in. Rick K6LE On 10/21/2010, at 6:29 , pastor...@verizon.net wrote: > > Been trying to decode PSK 31 the past 2 nights with no success. I received > my K3 2 days ago and I've set the mode to Data plus pushed the decode button > on the right and selected PSK 31. But for some reason when I go to the > 14,070 on 20 meters it will not decode the PSK. Perhaps there is a fine tune > that needs to be activated so that I can do this. I have no problem on CW, > but PSK 31 is a challenge. Any suggestions? Thanks!! Mark KB3Z __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] PSK-31 Decoding
> Two things to check Mark. > > 1. Is CWT on? It needs to be on and the threshold set so that you see the > marker > centered in the tuning area. > > 2. If you have Decode and CWT on maybe you have the alternate DISP on > (current, > voltage, temp...etc). Try tapping DISP to go back to the normal VFO B > display. You also need to sharpen the WIDTH so that you are only hearing *one* PSK signal, and it needs to be centered on the CWT -- a couple of taps of SPOT will usually do this once you have it in the CWT range. On a busy band, I often use WIDTH of 50 Hz. 73, Lyle KK7P __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] PSK-31 Decoding
Two things to check Mark. 1. Is CWT on? It needs to be on and the threshold set so that you see the marker centered in the tuning area. 2. If you have Decode and CWT on maybe you have the alternate DISP on (current, voltage, temp...etc). Try tapping DISP to go back to the normal VFO B display. - 73, Greg - AB7R Whidbey Island WA NA-065 On Thu Oct 21 6:29 , pastor...@verizon.net sent: > >Been trying to decode PSK 31 the past 2 nights with no success. I received my >K3 2 days ago and I've set the mode to Data plus pushed the decode button on the right and selected PSK 31. But for some reason when I go to the 14,070 on 20 meters it will not decode the PSK. Perhaps there is a fine tune that needs to be activated so that I can do this. I have no problem on CW, but PSK 31 is a challenge. Any suggestions? Thanks!! Mark KB3Z >__ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: Elecraft@mailman.qth.net','','','')">Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html