I had a similar fail message and found that my filters were not set up
properly. I did not have the correct filter specified for transmit. The rig
produced no output. Maybe your filter setup got messed with. Does your
transmit work otherwise?
Dave K1WHS
----- Original Message -----
From: "Michael Raskin" <rask1...@bellsouth.net>
To: "elecraft" <elecraft@mailman.qth.net>
Sent: Monday, April 27, 2015 3:34 PM
Subject: [Elecraft] Transmit Gain Calibration Failed After KSYN3A Installed
I KNOW this is cockpit error (it always is) so I’m hoping someone can tell
be what I am doing wrong. I just installed the two KSYN3A synthesizer
boards in my K3 main and sub and successfully upgraded firmware to 5.14,
and performed the installation check: SYN1 OK and SYN2 OK. When I tried
to do the xmit gain calibration at 50 watts, this is the message I
received: “Xmit gain calibration failed because transmit power did not
reach the expected value. 50 watt calibration failed.” I even tried it at
5 watts and still didn’t work. Yes, I cycled K3 off and then on after
firmware upgrade.
Mike, W4UM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k1...@metrocast.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com