Re: [Orgmode] Selective Export Question
On Dec 22, 2009, at 7:24 AM, Mark Elston wrote: I have been making progress on my use of org-mode to manage both my teaching notes and handouts in a single document. However, there is something I still have not been able to make happen. That is selective exporting of text *without* exporting a headline along with it. Here is a sample of what I would like. In this example I have sections with common text (should be in both teaching notes and handouts) and sections that are specific to each individual output format. What I have below is set up to export the notes. What I would like is to have the text (only) of the non-excluded sections and not the headlines. Hi Mark, I think the right path for this is a function that you write and install in org-export-preprocess-hook. Then you can set your own conditions and remove those headlines before Org even tries to look at them. HTH - Carsten -- #+TITLE: Test #+LaTeX_CLASS: ClassNotes #+OPTIONS: toc:nil H:8 tags:nil #+EXPORT_EXCLUDE_TAGS: handouts * Headline 1 some text ** Headline 1-1 even more text * Headline 2 some more text ** Headline 2-1 Common text 1. Should be followed by handout or notes text. * should be handouts only:handouts: handout text * should be notes only :notes: notes text ** Headline 2-2 Common text 2. Should be followed by handout or notes text. *:handouts: handout text again *:notes: notes text again -- The relevant material from my org-export-latex-classes is: (ClassNotes \\documentclass[letter,twoside,openright]{memoir} ... (\\chapter{%s} . \\chapter*{%s}) (\\section{%s} . \\section*{%s}) (\\subsection{%s} . \\subsection*{%s}) (\\subsubsection{%s} . \\subsubsection*{%s}) (%% Level 5 . %% Level 5) (%% Level 6 . %% Level 6) (%% Level 7 . %% Level 7) (%% Level 8 . %% Level 8)) ... I was hoping to allow all levels of heading to be exported but only write comments for the levels below level 4. It didn't work out that way. With the above I don't get *any* of the :notes: or :handouts: sections written out. However, if I include empty level three and four headlines (the stars followed by a mandatory space) I get the :notes: and :handouts: sections just fine. Except now I also get empty \subsection{} and \subsubsection{} blocks in my latex output. I have attached the resulting .tex file with comments pointing out the extra heading lines I would like to *not* see... The net result is a lot of blank space in the resulting .pdf file between the 'common' text and the note- or handout-specific text. This is *definitely* not what I had in mind. Is there any way of working around this or correcting this behavior? Mark test.tex___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode - Carsten ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] Selective Export Question
Carsten Dominik wrote: On Dec 22, 2009, at 7:24 AM, Mark Elston wrote: I have been making progress on my use of org-mode to manage both my teaching notes and handouts in a single document. However, there is something I still have not been able to make happen. That is selective exporting of text *without* exporting a headline along with it. Here is a sample of what I would like. In this example I have sections with common text (should be in both teaching notes and handouts) and sections that are specific to each individual output format. What I have below is set up to export the notes. What I would like is to have the text (only) of the non-excluded sections and not the headlines. Hi Mark, I think the right path for this is a function that you write and install in org-export-preprocess-hook. Then you can set your own conditions and remove those headlines before Org even tries to look at them. HTH - Carsten Thanks, Carsten. It is amazing how much infrastructure there is to support so many features. I wasn't aware of all the hooks available and this one escaped my attention. I will look into it. My elisp isn't as good as my C++ (or Python, or Perl...) but it is probably good enough to make use of this. Mark ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] Selective Export Question
Hi Mark, there are about 100 hooks, see http://orgmode.org/worg/org-configs/org-hooks.php And I am very happy to add more, wherever these is a use for it. - Carsten On Jan 3, 2010, at 5:15 PM, Mark Elston wrote: Carsten Dominik wrote: On Dec 22, 2009, at 7:24 AM, Mark Elston wrote: I have been making progress on my use of org-mode to manage both my teaching notes and handouts in a single document. However, there is something I still have not been able to make happen. That is selective exporting of text *without* exporting a headline along with it. Here is a sample of what I would like. In this example I have sections with common text (should be in both teaching notes and handouts) and sections that are specific to each individual output format. What I have below is set up to export the notes. What I would like is to have the text (only) of the non-excluded sections and not the headlines. Hi Mark, I think the right path for this is a function that you write and install in org-export-preprocess-hook. Then you can set your own conditions and remove those headlines before Org even tries to look at them. HTH - Carsten Thanks, Carsten. It is amazing how much infrastructure there is to support so many features. I wasn't aware of all the hooks available and this one escaped my attention. I will look into it. My elisp isn't as good as my C++ (or Python, or Perl...) but it is probably good enough to make use of this. Mark - Carsten ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] Selective Export Question
So, no Christmas present for me? :) Merry Christmas everyone. Thanks for all the hard work and the help over the last year. Congratulations for working together to produce such a fantastic tool. Mark Mark Elston wrote: I have been making progress on my use of org-mode to manage both my teaching notes and handouts in a single document. However, there is something I still have not been able to make happen. That is selective exporting of text *without* exporting a headline along with it. Here is a sample of what I would like. In this example I have sections with common text (should be in both teaching notes and handouts) and sections that are specific to each individual output format. What I have below is set up to export the notes. What I would like is to have the text (only) of the non-excluded sections and not the headlines. -- #+TITLE: Test #+LaTeX_CLASS: ClassNotes #+OPTIONS: toc:nil H:8 tags:nil #+EXPORT_EXCLUDE_TAGS: handouts * Headline 1 some text ** Headline 1-1 even more text * Headline 2 some more text ** Headline 2-1 Common text 1. Should be followed by handout or notes text. * should be handouts only:handouts: handout text * should be notes only :notes: notes text ** Headline 2-2 Common text 2. Should be followed by handout or notes text. *:handouts: handout text again *:notes: notes text again -- The relevant material from my org-export-latex-classes is: (ClassNotes \\documentclass[letter,twoside,openright]{memoir} ... (\\chapter{%s} . \\chapter*{%s}) (\\section{%s} . \\section*{%s}) (\\subsection{%s} . \\subsection*{%s}) (\\subsubsection{%s} . \\subsubsection*{%s}) (%% Level 5 . %% Level 5) (%% Level 6 . %% Level 6) (%% Level 7 . %% Level 7) (%% Level 8 . %% Level 8)) ... I was hoping to allow all levels of heading to be exported but only write comments for the levels below level 4. It didn't work out that way. With the above I don't get *any* of the :notes: or :handouts: sections written out. However, if I include empty level three and four headlines (the stars followed by a mandatory space) I get the :notes: and :handouts: sections just fine. Except now I also get empty \subsection{} and \subsubsection{} blocks in my latex output. I have attached the resulting .tex file with comments pointing out the extra heading lines I would like to *not* see... The net result is a lot of blank space in the resulting .pdf file between the 'common' text and the note- or handout-specific text. This is *definitely* not what I had in mind. Is there any way of working around this or correcting this behavior? Mark ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] Selective Export Question
Merry Christmas Mark, One way to create two LaTeX documents in the same org file using common elements and keeping fine control over the LaTeX output is to use Org-babel. Here's an example from the Uses section of the Org-babel documentation on Worg: ** Example *** TODO Your name - Enter your full name on the open line below. #+srcname: your-name #+begin_src latex Tom Dye #+end_src *** TODO Your email address - Enter your email address on the open line below. #+srcname: your-email #+begin_src latex tsd at tsdye dot com #+end_src *** No data entry below this line - The two source blocks here each produce a LaTeX document after they are tangled with a call to =org-babel-tangle=. #+begin_src latex :noweb :tangle dist-form.tex \documentclass[12pt]{article} \begin{document} \section{Distribution Form} \begin{description} \item[Name] your-name \item[Email] your-email \end{description} \end{document} #+end_src #+begin_src latex :noweb :tangle file-form.tex \documentclass[10pt]{article} \begin{document} \section{File Form} your-name can be reached at your-email. \end{document} #+end_src To my mind, using Org-babel this way is kind of like using the Org- mode Agenda. It frees the organization of your org file from the organization of some external model, leaving you to organize it in the way that makes the most sense to you. That said, I'm relatively confident that there is some way to do what you want in Org-mode using the built-in LaTeX exporter, but I don't know what it might be. All the best, Tom On Dec 24, 2009, at 8:43 AM, Mark Elston wrote: So, no Christmas present for me? :) Merry Christmas everyone. Thanks for all the hard work and the help over the last year. Congratulations for working together to produce such a fantastic tool. Mark Mark Elston wrote: I have been making progress on my use of org-mode to manage both my teaching notes and handouts in a single document. However, there is something I still have not been able to make happen. That is selective exporting of text *without* exporting a headline along with it. Here is a sample of what I would like. In this example I have sections with common text (should be in both teaching notes and handouts) and sections that are specific to each individual output format. What I have below is set up to export the notes. What I would like is to have the text (only) of the non-excluded sections and not the headlines. -- #+TITLE: Test #+LaTeX_CLASS: ClassNotes #+OPTIONS: toc:nil H:8 tags:nil #+EXPORT_EXCLUDE_TAGS: handouts * Headline 1 some text ** Headline 1-1 even more text * Headline 2 some more text ** Headline 2-1 Common text 1. Should be followed by handout or notes text. * should be handouts only:handouts: handout text * should be notes only :notes: notes text ** Headline 2-2 Common text 2. Should be followed by handout or notes text. *:handouts: handout text again *:notes: notes text again -- The relevant material from my org-export-latex-classes is: (ClassNotes \\documentclass[letter,twoside,openright]{memoir} ... (\\chapter{%s} . \\chapter*{%s}) (\\section{%s} . \\section*{%s}) (\\subsection{%s} . \\subsection*{%s}) (\\subsubsection{%s} . \\subsubsection*{%s}) (%% Level 5 . %% Level 5) (%% Level 6 . %% Level 6) (%% Level 7 . %% Level 7) (%% Level 8 . %% Level 8)) ... I was hoping to allow all levels of heading to be exported but only write comments for the levels below level 4. It didn't work out that way. With the above I don't get *any* of the :notes: or :handouts: sections written out. However, if I include empty level three and four headlines (the stars followed by a mandatory space) I get the :notes: and :handouts: sections just fine. Except now I also get empty \subsection{} and \subsubsection{} blocks in my latex output. I have attached the resulting .tex file with comments pointing out the extra heading lines I would like to *not* see... The net result is a lot of blank space in the resulting .pdf file between the 'common' text and the note- or handout-specific text. This is *definitely* not what I had in mind. Is there any way of working around this or correcting this behavior? Mark ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ___ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode