Northeast Product Safety Society Vendors Night Tomorrow, November 19
The Northeast Product Safety Society invites you to the 14th annual Vendors Night to be held at the Boxborough Holiday Inn tomorrow, November 19th from 5:00 to 9:30 PM. Vendor's Night is opportunity to get answers to all your product safety/EMC questions in one evening from up to 40 certification agencies, qualified testing laboratories, independent consultants and suppliers of services, test equipment and components. If you will be in the area, feel free to join us as NPSS membership or advance reservations are NOT required. The Vendors Night registration opens at 5:00 PM and a cash bar opens at 5:30 PM. The Exhibition will be open from 5:00 PM to 9:30 PM. The buffet style dinner will be served during the exhibition from 7:00 PM to 9:00 PM. A Vendors Night announcement flyer is available at http://www.nepss.net/14th NPSS Flyer.doc and a Vendors Night exhibitor registration form is available at http://www.nepss.net/14th NPSS Reg Form.doc on the NPSS web site. There are still a few tables available for any vendor that would like to participate in the 14th Annual Vendors Night. Please feel free to contact Bill Graham at b...@grahamweb.com, Dave Wheeler at inter...@aol.com or myself for more information about Vendors Night. There is no charge for admission to the exhibits with complimentary buffet dinner. So that we may plan the dinner, we ask you to make a dinner notice reservations with Donna Kearney at 978-486-8880 X272 (email to dkear...@curtis-straus.com ) or Matthew Campanella at 508-786-7629 (email to matthew.campane...@motorola.com ). The menu for the buffet dinner is carver served Steamship Roast Beef, Chicken, Vegetables, plus rolls and butter. Keeping on the lite side, the dinner appetizers will be assorted cheese display with various crackers and fruit. A Chef's choice of assorted desserts consisting of cookies, brownies, tea, coffee and decaf will also be available. In addition to the world class products and varied local services on display this year there will be a prize drawing for those attending. This Prize drawing is restricted to visitors to the show and includes five $100 prizes funded by the NPSS as well as prizes donated by the vendors. There will be a separate raffle for the vendors with the prize being a free booth at the 2008 Vendors Night exhibition. In addition various companies will have handouts including Tee Shirts and Coffee Mugs. Please join us at the Holiday Inn on the19th and network with your many friends and colleagues in the Product Safety and EMC communities in New England, enjoy an evening of good food and perhaps not only come away with a little more product or service information but maybe a little more cash in your pocket. Further information about the Northeast Product Safety Society is available at http://www.nepss.net. An NPSS membership application form with brief NPSS brochure is also available on the NPSS site at http://www.nepss.net/page18.html. The 14th Annual Vendors Night location is: Boxborough Holiday Inn 242 Adams Place Boxborough, MA 01719 (978) 263-8701 Web directions are available at http://www.ichotelsgroup.com/h/d/hi/1/en/hotel/boxma/transportation Directions: From Route 495 North or South, take Exit 28 to Route 111 East Turn right onto Adams Place (approximately 500 feet from Route 495 North) The Holiday Inn is the last building on the left. Matt Campanella NPSS Secretary Compliance Engineer Motorola, Inc. Broadband Communications Sector 111 Locke Drive Marlborough, MA 01752 (508) 786-7629 Direct (508) 786-7500 Main (508) 480-6332 Fax matthew.campane...@motorola.com email - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com
Brazil - machinery with electrical controls
Does anyone know what (if any) are the mandatory requirements for a piece of food processing machinery (with electrical controls) in Brazil? Nick. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com
CCC Parts Certifications and Periodic Verification
Good morning list members, We currently have 3 lists of ‘critical’ parts from CQC for our ATMs going through the CCC certification process: 1. Parts Modules Requiring CCC Certification These are ATM parts and modules which have already been identified by CQC as requiring CCC certification at the module level – currently being worked by the suppliers. 2) Parts Modules Indentified in CQC Product Test Reports These are ATM parts and modules which have or will be identified by CQC during ATM product testing as safety critical items which will be called out in the product CQC approval report and which require to remain on the current supplier until further suppliers can be approved through CQC 3) Parts Modules which Require to Meet China National Standards These are ATM parts and modules which NCR will be required to demonstrate that it can verify ongoing compliance of the part to China National Standards through supplier provided data. Could I ask any of you who have been involved in this process before to spare a few minutes to advise (off or online) on any experience you have on handling parts lists like explained above, the various CCC parts categories, how you learn of new categories, and also how you meet the CQC ongoing parts compliance verification process requirements. Thanks and regards, Craig Craig Petrie, Product Safety Engineer, NCR Financial Solutions Group Ltd., 3rd Floor East, Discovery Centre, 3 Fulton Road, Dundee, Scotland. DD2 4SW E-Mail: craig.d.pet...@ncr.com Tel: +44(0)1382 592803 (direct) / 592609 (lab) - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
Re: China CCC-S Label
Go to CNCA website at http://219.238.178.8/20040420/column/227.htm. Section 6.1 of each implementation rule shows the mark for the products. On 11/17/08, Gartman, Richard rgart...@ti.com wrote: Members, I am looking for what products need the CCC-S mark for China? Any guidance is appreciated. TI manufactures battery (AAA) powered Calculators. W. Richard Gartman, MS, CSP Product Stewardship Manager Texas Instruments, Education Technology 7800 Banner Drive, Dallas, Tx 75251 Office: 972-917-1636Email: rgart...@ti.com mailto:rgart...@ti.com Fax: 972-917-0668 URL: www.education.ti.com http://www.education.ti.com/ http://education.ti.com/us/productstewardship http://education.ti.com/us/productstewardship P Please consider the environment before printing this email. There is only one earth - don't waste it. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
RE: What's the deal with Wire Nuts?
Brian, The use of wire nuts on short wire pigtails in a wiring box for connection to the building wiring is primarily a North American wiring method. You can deduce this by looking at the marks on the box that they came in. They most likely have listing marks for the US, Canada, and/or Mexico, and wire sizes are in “AWG”. If, on the other hand, you saw the CE Mark or wire sizes posted in “mm2”, or some other international certification markings, you would have evidence that the use of those wire nuts is an acceptable wiring method elsewhere. More evidence of this can be seen in national deviations found in Annex NAE of UL 60950-1/CSA C22.2 No. 60950-1 vs.the group deviations of EN 60950-1. UL/CSA 69050-1, Annex NAE 3.2.3 describes leads for field wiring connections to be not smaller than 150 mm (6 inches) in length, making reference to sections of the National Electrical Code and Canadian Electrical Code, Part I. Annex NAE 3.2.9 further describes box volume calculations required by the NEC and Canadian Electrical Code for the number of conductors being connected in a wiring box, normally by wire nuts.On the other hand, EN 60950-1 has no such deviations or notations. However, written into the body of the IEC 60950-1 and EN 60950-1 (and other national derivative standards) is a wiring method for permanent connection to the mains not acceptable in the US and Canada – the use of a non-detachable power supply cord for permanent connection. The most universally accepted means for permanent connection to the mains is to use a field wiring terminal block with a current rating 125 % of the current rating of the product it is installed in, certified for the country of deployment. In conjunction, holes should be supplied nearby for accommodation of a conduit system or cable-securing glands. Best Regards, Don Gies, N.C.E Senior Product Compliance Engineer Alcatel-Lucent Murray Hill, NJ 07974-0636 USA From: Kunde, Brian [mailto:brian_ku...@lecotc.com] Sent: Monday, November 17, 2008 3:53 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: What's the deal with Wire Nuts? Scott, Does the 60950 standard give examples of what would satisfy the “two independent fixings” requirement? How would a terminal block satisfy this? I have heard that a wire nut can be used for the electrical connection, but you have to also mechanically hold the wires together which can be done with a cable tie. No where have I found this documented, though. The Other Brian From: scott barrows [mailto:sbarro...@yahoo.com] Sent: Monday, November 17, 2008 2:50 PM To: sbarro...@yahoo.com; Ted Eckert; EMC-PSTC@LISTSERV.IEEE.ORG; Aldous, Scott; Kunde, Brian Subject: RE: What's the deal with Wire Nuts? Hello Other Brian, That is a term I have heard from years gone by. A standard does not specifically prohibit them however if you look at IEC 60950 para 3.1.9 it would be difficult to use wire nut that met the requirements of two independent fixings. Most EU standards have a similar discription as well. Best Regards, Scott --- On Mon, 11/17/08, Kunde, Brian brian_ku...@lecotc.com wrote: From: Kunde, Brian brian_ku...@lecotc.com Subject: RE: What's the deal with Wire Nuts? To: sbarro...@yahoo.com, Ted Eckert ted.eck...@microsoft.com, EMC-PSTC@LISTSERV.IEEE.ORG, Aldous, Scott scott.ald...@aei.com Date: Monday, November 17, 2008, 2:31 PM Where does the term, “Redundant Captive Device” come from? The device which has the wire nuts (twist-on wire connectors) is a water chiller used as a peripheral for a piece of laboratory equipment to be sold internationally. The manufacturer is not used to making laboratory equipment, but industrial cooling devices in the US where it maybe acceptable to use wire nuts. Looking at the IEC/EN 61010-1 standard I cannot see any specific requirement for redundant captive device or redundant connection. I do see a statement in 10.5.3b regarding “insulation which supports the TERMINALS shall be made of material that will not soften” due to dissipated heat from current through the connection. I assume that if the plastic cap of a wire nut gets hot from current passing through the connection and softens then the connection will become loose. Some wire nuts are all plastic and the larger ones have a copper spring inside. In either case, it is the plastic that secures the connection. On a crimp type connection (such as a spade lug or crimp splice), even though they have a plastic case, the electrical connection is made from a metal part which is not likely to soften. It would be nice if there was a clear statement (chapter and verse) documenting if wire nuts can be used in Europe or not or some kind of interpretation letter. The Other Brian From: scott barrows
RE: MEPS requirements for Australia/New Zealand
Yes the MEPS information does provide a guide to what is in scope. http://www.energyrating.gov.au/eps2.html A single output external power supply which is covered by MEPS is defined as a unit which: 1. has an input from mains supply (usually 110 V, 60 Hz; 230 V, 50 Hz; 240 V, 50 Hz or a range including some or all of these input conditions); and 2. has one ELV output (either a.c. or d.c.) that is either at a fixed voltage or user selectable through a selector switch; and 3. is sold with, or intended to be used with, a separate end-use product that constitutes the primary load; and 4. is contained in a separate physical enclosure from the end-use product (i.e. the housings of the power supply and its associated product are different, not their retail packaging); and 5. is connected to the end use product via a hard-wired or removable male/female electrical connection, cable, cord or other wiring; and 6. does not have batteries or battery packs that physically attach directly to the power supply unit (including those that are removable e.g. a battery pack for a portable electric drill); and 7. does not have a battery chemistry or type selector switch and an indicator light or state of charge meter. Regards, Denis Ryskamp Environmental Compliance Manager Trimble Dayton 5475 Kellenburger Road Dayton, Ohio 45424 *: 01-937-245-5539 *: denis_rysk...@trimble.com From: Barry Esmore [mailto:bar...@melbpc.org.au] Sent: Monday, November 17, 2008 5:43 PM To: Denis Ryskamp; Anders Svensson B; emc-p...@ieee.org Subject: Re: MEPS requirements for Australia/New Zealand My understanding is that some power supply battery chargers are exempt and power supplies with multiple outputs are also exempt. Regards Barry Esmore AUS-TICK 281 Lawrence Rd Mount Waverley Vic 3149 Australia Ph: +613 9886 1345 Fax: +613 9013 9552 - Original Message - From: Denis Ryskamp mailto:denis_rysk...@trimble.com To: Anders Svensson B mailto:anders.b.svens...@ericsson.com ; emc-p...@ieee.org Sent: Monday, 17 November 2008 11:44 PM Subject: RE: MEPS requirements for Australia/New Zealand - When is it mandatory? *Targeting dates from 1st December 2008 in Australia and 1st April 2009 in New Zealand - Valid for all Power supplies? *External power supplies - Marking needed? *Energy Efficiency III requirements mandatory, IV optional - Briefly the requirements? *go to link: http://www.energyrating.gov.au/eps2.html - Only marking requirements of status enough? *Registration of EPS Regards, Denis Ryskamp Environmental Compliance Manager Trimble Dayton 5475 Kellenburger Road Dayton, Ohio 45424 *: 01-937-245-5539 *: denis_rysk...@trimble.com From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Anders Svensson B Sent: Monday, November 17, 2008 7:37 AM To: emc-p...@ieee.org Subject: MEPS requirements for Australia/New Zealand Dear experts, Anyone who knowes about the requirements for MEPS for Australia and New Zealand for a external power supply? Forv example: - When is it mandatory? - Valid for all Power supplies? - Marking needed? - Briefly the requirements? - Only marking requirements of status enough? All inputs is very welcome! Thanks in advance! Regards Anders - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org
AW: Brazil - machinery with electrical controls
Hi Nick, we have a Market Access Guide - Machine Safety Requirements in Brazil in our compliance database. Brief description: 1. Currently no mandatory machine safety requirements are exist. Reference: Curt Miller, Brazil Machinery Builders´Association (ABIMAQ) and How to export to Brazil (Practical Guide to the Brazilian Importing Process) http://www.braziltradenet.gov.br/ARQUIVOS/Publicacoes/Manuais/PUBCEXBrasilI. pdf 2. Only OSHA regulations are mandatory (similar to 29 CFR 1910 in the states). Therefore an inspection before putting into service is mandatory. 3. Minimum state of the art for the importer: European Machinery Directive, CE-Marking will be accepted. Therefore the following standards are a good choice: ISO 14121-1, ISO 13849-1 or IEC 62061, IEC 60204-1, ISO 12100-1/-2, ISO 13850, ... 4. Brazil will publish machine safety regulations within the next 1-2 years (wait and see...). 5. Standards: Associacao Brasileira de Normas Technicas (ABNT), ABNT/CB-04 Maquinas e equipamentos mecanicos (Standards for machines and mechanical equipment). But normally this standards haven´t a practical acceptation. I hope this information are useful. If you need more details contact me directly, please. Mit freundlichen Grüßen Yours sincerely Dipl.-Ing. Michael Loerzer Managing Director Regulatory Affairs Specialist michael.loer...@globalnorm.de Fon: +49 30 3229027-50, Direct Call: -51 Mobile: +49 170 3229027 Fax: +49 30 3229027-59 www.Globalnorm.de Globalnorm GmbH, Sitz der Gesellschaft: Alt-Moabit 94, 10559 Berlin Geschaeftsfuehrer/Managing Director: Dipl.-Ing. Michael Loerzer Amtsgericht Berlin-Charlottenburg HRB 105204 B, USt-ID-Nummer: DE251654448 Von: emc-p...@ieee.org [mailto:emc-p...@ieee.org] Im Auftrag von Nick Williams Gesendet: Dienstag, 18. November 2008 11:06 An: emc-p...@ieee.org Betreff: Brazil - machinery with electrical controls Does anyone know what (if any) are the mandatory requirements for a piece of food processing machinery (with electrical controls) in Brazil? Nick. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com
Off Topic - switch ratings
This is a bit off topic, but I'm hoping list members may be able to help. I'm trying to find data on a Cutler-Hammer ST42A toggle switch. I'm looking for voltage and current ratings. I think it is an aircraft switch. A Google search has not turned up any technical data. Thanks in advance. Scott B. Lacey - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com
RE: MEPS requirements for Australia/New Zealand
Others have already provided you with links to the Australian government sites providing all the information you should need so I will not add to that. I would however, just draw your attention to the statement in the 'Fact Sheet' (i.e. www.energyrating.gov.au/library/pubs/2008-factsheet-eps.pdf http://www.energyrating.gov.au/library/pubs/2008-factsheet-eps.pdf ) concerning proposed amendments to AS/NZS 4665 Parts 1 2 which the Fact Sheet states are currently in the approval process (see in particular the statement at the bottom of page 2 of the Fact Sheet). These amendments, as described on pages 3 4 of the Fact Sheet, are not actually in the 'approval process' really. They are actually still to be balloted by the relevant Australian standards committee however, the information provided concerning what these amendments are likely to ultimately contain probably will not change too much before they are accepted. The background and reason for these amendments can be found at http://www.energyrating.gov.au/pubs/2008-meps-eps-update.pdf http://www.energyrating.gov.au/pubs/2008-meps-eps-update.pdf . You may have already seen this information however, as a link to it was provided in one of the URLs already provided to you in an earlier reply (i.e. http://www.energyrating.gov.au/eps2.html http://www.energyrating.gov.au/eps2.html ). Best regards, Kevin Richardson Stanimore Pty Limited Compliance Advice Solutions for Technology (Legislation/Regulations/Standards/Australian Agent Services) Ph: 02-4329-4070 (Int'l: +61-2-4329-4070) Fax: 02-4328-5639 (Int'l: +61-2-4328-5639) Mobile: 04-1224-1620 (Int'l: +61-4-1224-1620) Email:kevin.richard...@stanimore.comorkevin.richard...@ieee.org URL: www.stanimore.com Confidentiality This material (this email including all attachments) may contain confidential and/or privileged information intended to be read or used by the addressees only. If you are not one of the intended recipients, any copying, disclosure, distribution, use of or reliance upon this material is prohibited. If you receive this material in error, please immediately notify Stanimore Pty Limited and delete/destroy all copies (electronic and hardcopy) of this email and all attachments. While the sender tries to ensure the accuracy of the information contained in this material, Stanimore take no responsibility for any actions taken as a result of receiving this material or for any consequence of its use. -Original Message- From: emc-p...@ieee.org [mailto:emc-p...@ieee.org]On Behalf Of Denis Ryskamp Sent: Wednesday, 19 November 2008 12:58 AM To: Barry Esmore; Anders Svensson B; emc-p...@ieee.org Subject: RE: MEPS requirements for Australia/New Zealand Yes the MEPS information does provide a guide to what is in scope. http://www.energyrating.gov.au/eps2.html A single output external power supply which is covered by MEPS is defined as a unit which: 1. has an input from mains supply (usually 110 V, 60 Hz; 230 V, 50 Hz; 240 V, 50 Hz or a range including some or all of these input conditions); and 2. has one ELV output (either a.c. or d.c.) that is either at a fixed voltage or user selectable through a selector switch; and 3. is sold with, or intended to be used with, a separate end-use product that constitutes the primary load; and 4. is contained in a separate physical enclosure from the end-use product (i.e. the housings of the power supply and its associated product are different, not their retail packaging); and 5. is connected to the end use product via a hard-wired or removable male/female electrical connection, cable, cord or other wiring; and 6. does not have batteries or battery packs that physically attach directly to the power supply unit (including those that are removable e.g. a battery pack for a portable electric drill); and 7. does not have a battery chemistry or type selector switch and an indicator light or state of charge meter. Regards, Denis Ryskamp Environmental Compliance Manager Trimble Dayton 5475 Kellenburger Road Dayton, Ohio 45424 *: 01-937-245-5539 *: denis_rysk...@trimble.com From: Barry Esmore [mailto:bar...@melbpc.org.au] Sent: Monday, November 17, 2008 5:43 PM To: Denis Ryskamp; Anders Svensson B; emc-p...@ieee.org Subject: Re: MEPS requirements for Australia/New Zealand My understanding is that some power supply battery chargers are exempt and power supplies with multiple outputs are also exempt. Regards Barry Esmore AUS-TICK 281 Lawrence Rd
TEST MESSAGE - PLEASE IGNORE
Sent by Scott Douglas - List admin - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com