Re: [PSES] HP 8546A EMI Receiver - Looking for calibration facility
We use our 8546A receiver every day and love it. It is still one of the best frequency domain receivers around. We use AcuCal (recently acquired by Trescal) who has mobile labs that travel all over the Americas. They back right up to our lab door, we hand carry our receiver to their 5th wheel trailer/lab, and in about ½ a day it is calibrated and back in service. No wait, no shipper, no packaging, no damage in shipping, and at a lower cost of what HP was charging us back in the day. For us, the mobile labs such as this makes the most sense for test equipment we rely on so heavily. Brian Kunde Manager * Compliance Engineering LECO Corp * Compliance Testing Center From: Bill Stumpf [mailto:bstu...@dlsemc.com] Sent: Tuesday, October 23, 2018 11:39 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] HP 8546A EMI Receiver - Looking for calibration facility Bob, You might try Trescal Bill From: Sykes, Bob [mailto:bob.sy...@gilbarco.com] Sent: Tuesday, October 23, 2018 10:21 AM To: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG> Subject: [PSES] HP 8546A EMI Receiver - Looking for calibration facility Worldly Experts, I just learned that Keysight has unceremoniously dropped calibration and repair support for the 8546A EMI receiver. It's an old beast, but we like it and use it a lot. Does anyone still use one of these and know of a facility (preferably U.S.) that can calibrate them? adTHANKSvance, Bob Sykes Please be advised that this email may contain confidential information. If you are not the intended recipient, please notify us by email by replying to the sender and delete this message. The sender disclaims that the content of this email constitutes an offer to enter into, or the acceptance of, any agreement; provided that the foregoing does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas mailto:sdoug...@ieee.org>> Mike Cantwell mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher mailto:j.bac...@ieee.org>> David Heald mailto:dhe...@gmail.com>> CONFIDENTIALITY NOTICE: This message is intended only for the use of the person or organization to which it is addressed or was intended to be addressed, and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, or responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by email and delete the original message immediately . The sender, its subsidiaries and affiliates, do not accept liability for any errors, omissions, corruption or virus in the contents of this message or any attachments that arise as a result of e-mail transmission. Thank you. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas mailto:sdoug...@ieee.org>> Mike Cantwell mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher mailto:j.bac...@ieee.org>> David Heald mailto:dhe...@gmail.com>> LECO Corporation Notice: This communica
Re: [PSES] HP 8546A EMI Receiver - Looking for calibration facility
Hi Bob, You may want to check these folks: http://www.techmastertest.com/techmaster/techmaster-service-advantage/ I don’t have an 8546A and I am not affiliated with this lab but their website shows they do RF test equipment calibration and repair. I use them for antenna calibration because they’re local (California) and ISO 17025 accredited. Manny Barron Tuesday, October 23, 2018, 8:20 AM -0700 from bob.sy...@gilbarco.com < bob.sy...@gilbarco.com >: >Worldly Experts, > >I just learned that Keysight has unceremoniously dropped calibration and >repair support for the 8546A EMI receiver. >It’s an old beast, but we like it and use it a lot. Does anyone still use one >of these and know of a facility (preferably U.S.) that can calibrate them? > >adTHANKSvance, >Bob Sykes > > > >-- >Please be advised that this email may contain confidential information. If you >are not the intended recipient, please notify us by email by replying to the >sender and delete this message. The sender disclaims that the content of this >email constitutes an offer > to enter into, or the acceptance of, any agreement; provided that the > foregoing does not invalidate the binding effect of any digital or other > electronic reproduction of a manual signature that is included in any > attachment. - > >This message is from the IEEE Product Safety Engineering Society emc-pstc >discussion list. To post a message to the list, send your e-mail to < >emc-p...@ieee.org > >All emc-pstc postings are archived and searchable on the web at: >http://www.ieee-pses.org/emc-pstc.html >Attachments are not permitted but the IEEE PSES Online Communities site at >http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used >formats), large files, etc. >Website: http://www.ieee-pses.org/ >Instructions: http://www.ieee-pses.org/list.html (including how to >unsubscribe) >List rules: http://www.ieee-pses.org/listrules.html >For help, send mail to the list administrators: >Scott Douglas < sdoug...@ieee.org > >Mike Cantwell < mcantw...@ieee.org > >For policy questions, send mail to: >Jim Bacher < j.bac...@ieee.org > >David Heald < dhe...@gmail.com > - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas Mike Cantwell For policy questions, send mail to: Jim Bacher: David Heald:
Re: [PSES] HP 8546A EMI Receiver - Looking for calibration facility
We use Hayes for ours. Regards, Josh From: Sykes, Bob [mailto:bob.sy...@gilbarco.com] Sent: Tuesday, October 23, 2018 11:21 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] HP 8546A EMI Receiver - Looking for calibration facility EXTERNAL SENDER: Verify links, attachments and sender before taking action Worldly Experts, I just learned that Keysight has unceremoniously dropped calibration and repair support for the 8546A EMI receiver. It's an old beast, but we like it and use it a lot. Does anyone still use one of these and know of a facility (preferably U.S.) that can calibrate them? adTHANKSvance, Bob Sykes Please be advised that this email may contain confidential information. If you are not the intended recipient, please notify us by email by replying to the sender and delete this message. The sender disclaims that the content of this email constitutes an offer to enter into, or the acceptance of, any agreement; provided that the foregoing does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas mailto:sdoug...@ieee.org>> Mike Cantwell mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher mailto:j.bac...@ieee.org>> David Heald mailto:dhe...@gmail.com>> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas Mike Cantwell For policy questions, send mail to: Jim Bacher: David Heald: BEGIN:VCARD PROFILE:VCARD VERSION:3.0 MAILER:Microsoft Exchange PRODID:Microsoft Exchange FN:Jim Danaher N:Danaher;Jim;;; EMAIL;TYPE=INTERNET:j...@hayesinstruments.com NOTE: ORG:Hayes Instrument Service; CLASS:PUBLIC ADR;TYPE=WORK:;;530 Boston Rd;Billerica;MA;01821;USA LABEL;TYPE=WORK:530 Boston Rd\nBillerica\, MA 01821 ADR;TYPE=HOME,PREF:;; LABEL;TYPE=HOME,PREF: ADR;TYPE=POSTAL:;; LABEL;TYPE=POSTAL: TEL;TYPE=WORK:978-663-4800 TEL;TYPE=PREF:978-663-4800 URL;TYPE=HOME:j...@hayesinstruments.com REV;VALUE=DATE-TIME:2018-10-23T15:36:46,492Z END:VCARD
Re: [PSES] HP 8546A EMI Receiver - Looking for calibration facility
Bob, You might try Trescal Bill From: Sykes, Bob [mailto:bob.sy...@gilbarco.com] Sent: Tuesday, October 23, 2018 10:21 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] HP 8546A EMI Receiver - Looking for calibration facility Worldly Experts, I just learned that Keysight has unceremoniously dropped calibration and repair support for the 8546A EMI receiver. It's an old beast, but we like it and use it a lot. Does anyone still use one of these and know of a facility (preferably U.S.) that can calibrate them? adTHANKSvance, Bob Sykes Please be advised that this email may contain confidential information. If you are not the intended recipient, please notify us by email by replying to the sender and delete this message. The sender disclaims that the content of this email constitutes an offer to enter into, or the acceptance of, any agreement; provided that the foregoing does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas mailto:sdoug...@ieee.org>> Mike Cantwell mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher mailto:j.bac...@ieee.org>> David Heald mailto:dhe...@gmail.com>> CONFIDENTIALITY NOTICE: This message is intended only for the use of the person or organization to which it is addressed or was intended to be addressed, and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, or responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by email and delete the original message immediately . The sender, its subsidiaries and affiliates, do not accept liability for any errors, omissions, corruption or virus in the contents of this message or any attachments that arise as a result of e-mail transmission. Thank you. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas Mike Cantwell For policy questions, send mail to: Jim Bacher: David Heald:
Re: [PSES] HP 8546A EMI Receiver - Looking for calibration facility
We don't have the same model though. So, hopefully they can help you. Josh From: Wiseman, Joshua Sent: Tuesday, October 23, 2018 11:37 AM To: 'Sykes, Bob'; EMC-PSTC@LISTSERV.IEEE.ORG Subject: RE: HP 8546A EMI Receiver - Looking for calibration facility We use Hayes for ours. Regards, Josh From: Sykes, Bob [mailto:bob.sy...@gilbarco.com] Sent: Tuesday, October 23, 2018 11:21 AM To: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG> Subject: [PSES] HP 8546A EMI Receiver - Looking for calibration facility EXTERNAL SENDER: Verify links, attachments and sender before taking action Worldly Experts, I just learned that Keysight has unceremoniously dropped calibration and repair support for the 8546A EMI receiver. It's an old beast, but we like it and use it a lot. Does anyone still use one of these and know of a facility (preferably U.S.) that can calibrate them? adTHANKSvance, Bob Sykes Please be advised that this email may contain confidential information. If you are not the intended recipient, please notify us by email by replying to the sender and delete this message. The sender disclaims that the content of this email constitutes an offer to enter into, or the acceptance of, any agreement; provided that the foregoing does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas mailto:sdoug...@ieee.org>> Mike Cantwell mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher mailto:j.bac...@ieee.org>> David Heald mailto:dhe...@gmail.com>> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas Mike Cantwell For policy questions, send mail to: Jim Bacher: David Heald:
[PSES] HP 8546A EMI Receiver - Looking for calibration facility
Worldly Experts, I just learned that Keysight has unceremoniously dropped calibration and repair support for the 8546A EMI receiver. It's an old beast, but we like it and use it a lot. Does anyone still use one of these and know of a facility (preferably U.S.) that can calibrate them? adTHANKSvance, Bob Sykes Please be advised that this email may contain confidential information. If you are not the intended recipient, please notify us by email by replying to the sender and delete this message. The sender disclaims that the content of this email constitutes an offer to enter into, or the acceptance of, any agreement; provided that the foregoing does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas Mike Cantwell For policy questions, send mail to: Jim Bacher: David Heald: