Re: [PSES] ANSI C63.4:2009 1GHz Testing
Under ANSI C63.4 2009 you are to test with the absorbers above 1GHz, but if the lab uses ANSI C63.4 2003 you CANNOT use the absorbers. Under ANSI C63.4:2009 the minimum attenuation for the absorbers must be 20dB and cover a 2.4 m by 2.4 m square. Thanks Dennis Ward Senior Certification Engineer PCTEST This communication and its attachments contain information from PCTEST Engineering Laboratory, Inc., and is intended for the exclusive use of the recipient (s) named above. It may contain information that is confidential and/or legally privileged. Any unauthorized use that may compromise that confidentiality via distribution or disclosure is prohibited. Please notify the sender immediately if you receive this communication in error, and delete it from your computer system. From: emcp...@aol.com [mailto:emcp...@aol.com] Sent: Friday, September 07, 2012 3:21 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] ANSI C63.4:2009 1GHz Testing Hello, I have a question regarding ANSI C63.4 1GHz testing setup with absorbers compliant to CISPR 16-1-4:2007. The test lab I use has absorbers on the ground plane meeting the CISPR 16-1-4:2007 VSWR requirement up to 6GHz. ANSI says absorbers are acceptable above 1GHz as long as the setup is meeting the CISPR 16-1-4 requirements. Does this mean I can run an FCC test from 1-40GHz with these absorbers in place? Thanks, Tim - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher j.bac...@ieee.org David Heald dhe...@gmail.com - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com
Re: [PSES] ANSI C63.4:2009 1GHz Testing
Hi Dennis, Does this mean I can use absorbers up to 40GHz following ANSI C63.4:2009? Thanks, Tim In a message dated 9/7/2012 3:46:16 P.M. Pacific Daylight Time, dw...@pctestlab.com writes: Under ANSI C63.4 2009 you are to test with the absorbers above 1GHz, but if the lab uses ANSI C63.4 2003 you CANNOT use the absorbers. Under ANSI C63.4:2009 the minimum attenuation for the absorbers must be 20dB and cover a 2.4 m by 2.4 m square. Thanks Dennis Ward Senior Certification Engineer PCTEST This communication and its attachments contain information from PCTEST Engineering Laboratory, Inc., and is intended for the exclusive use of the recipient (s) named above. It may contain information that is confidential and/or legally privileged. Any unauthorized use that may compromise that confidentiality via distribution or disclosure is prohibited. Please notify the sender immediately if you receive this communication in error, and delete it from your computer system. From: emcp...@aol.com [mailto:emcp...@aol.com] Sent: Friday, September 07, 2012 3:21 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] ANSI C63.4:2009 1GHz Testing Hello, I have a question regarding ANSI C63.4 1GHz testing setup with absorbers compliant to CISPR 16-1-4:2007. The test lab I use has absorbers on the ground plane meeting the CISPR 16-1-4:2007 VSWR requirement up to 6GHz. ANSI says absorbers are acceptable above 1GHz as long as the setup is meeting the CISPR 16-1-4 requirements. Does this mean I can run an FCC test from 1-40GHz with these absorbers in place? Thanks, Tim - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to _emc-pstc@ieee.org_ (mailto:emc-p...@ieee.org) All emc-pstc postings are archived and searchable on the web at: _http://www.ieee-pses.org/emc-pstc.html_ (http://www.ieee-pses.org/emc-pstc.html) Attachments are not permitted but the IEEE PSES Online Communities site at _http://product-compliance.oc.ieee.org/_ (http://product-compliance.oc.ieee.org/) can be used for graphics (in well-used formats), large files, etc. Website: _http://www.ieee-pses.org/_ (http://www.ieee-pses.org/) Instructions: _http://listserv.ieee.org/request/user-guide.html_ (http://listserv.ieee.org/request/user-guide.html) List rules: _http://www.ieee-pses.org/listrules.html_ (http://www.ieee-pses.org/listrules.html) For help, send mail to the list administrators: Scott Douglas _emcpstc@radiusnorth.net_ (mailto:emcp...@radiusnorth.net) Mike Cantwell _mcantwell@ieee.org_ (mailto:mcantw...@ieee.org) For policy questions, send mail to: Jim Bacher _j.bacher@ieee.org_ (mailto:j.bac...@ieee.org) David Heald _dheald@gmail.com_ (mailto:dhe...@gmail.com) - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com
Re: [PSES] ANSI C63.4:2009 1GHz Testing
Hi Tim Correct, ANSI C63.4:2009 uses the absorbers from 1 to 40 GHz per section 5.5 of C63.4:2009 Thanks Dennis Ward Senior Certification Engineer PCTEST This communication and its attachments contain information from PCTEST Engineering Laboratory, Inc., and is intended for the exclusive use of the recipient (s) named above. It may contain information that is confidential and/or legally privileged. Any unauthorized use that may compromise that confidentiality via distribution or disclosure is prohibited. Please notify the sender immediately if you receive this communication in error, and delete it from your computer system. From: emcp...@aol.com [mailto:emcp...@aol.com] Sent: Friday, September 07, 2012 4:00 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] ANSI C63.4:2009 1GHz Testing Hi Dennis, Does this mean I can use absorbers up to 40GHz following ANSI C63.4:2009? Thanks, Tim In a message dated 9/7/2012 3:46:16 P.M. Pacific Daylight Time, dw...@pctestlab.com writes: Under ANSI C63.4 2009 you are to test with the absorbers above 1GHz, but if the lab uses ANSI C63.4 2003 you CANNOT use the absorbers. Under ANSI C63.4:2009 the minimum attenuation for the absorbers must be 20dB and cover a 2.4 m by 2.4 m square. Thanks Dennis Ward Senior Certification Engineer PCTEST This communication and its attachments contain information from PCTEST Engineering Laboratory, Inc., and is intended for the exclusive use of the recipient (s) named above. It may contain information that is confidential and/or legally privileged. Any unauthorized use that may compromise that confidentiality via distribution or disclosure is prohibited. Please notify the sender immediately if you receive this communication in error, and delete it from your computer system. From: emcp...@aol.com [mailto:emcp...@aol.com] Sent: Friday, September 07, 2012 3:21 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] ANSI C63.4:2009 1GHz Testing Hello, I have a question regarding ANSI C63.4 1GHz testing setup with absorbers compliant to CISPR 16-1-4:2007. The test lab I use has absorbers on the ground plane meeting the CISPR 16-1-4:2007 VSWR requirement up to 6GHz. ANSI says absorbers are acceptable above 1GHz as long as the setup is meeting the CISPR 16-1-4 requirements. Does this mean I can run an FCC test from 1-40GHz with these absorbers in place? Thanks, Tim - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher j.bac...@ieee.org David Heald dhe...@gmail.com - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher j.bac...@ieee.org David Heald dhe...@gmail.com - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to emc-p...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@radiusnorth.net Mike Cantwell mcantw...@ieee.org
