Re: [Emc-users] Happy new year and also checking if the list isalive

[gene heskett]

On 1/3/23 12:56, John Dammeyer wrote:

Happy New Year everyone.
Yes I noticed the list was quiet.
I decided to put work with the tool setter/probe stuff on hold due to 
frustration.  I'm rereading
https://forum.linuxcnc.org/49-basic-configuration/29187-work-with-probe
and now on page 37 to try and get a handle on what I'm doing wrong or what I 
need to do for my situation.

It doesn't help that GIT allows multiple branches to develop each with 
different changes, some desired, some not.  I finally figured out I was using 
the Probe_V2 master which has the support for the Linux 2.8 and up.

I have the macros etc working so that on each tool change the tool is measured 
with the tool setter.
I've yet to get working anything that uses existing values in the tool table 
and if the length is 0 then go use the setter.


A Jolly good idea John, that will get most of us to actually make and 
use a permanent one. Up till now, all of my use has been only in the 
individual .ngc file on the GO704 wheere I sometimes setup a production 
line at various places on the table.


Usually using a piece of pcb for a tool contact, but that's difficult on 
the 6040's new spindle, the bearings appear to be ceramic as the spindle 
is insulated so I'm going to have to deploy a spindle stop and ground 
first.


There is a dust flange above the er20 of the 6040 that I could hit with 
a leaf spring or a slab of pcb but have not grokked the exact howto yet. 
Room is very precious there. Ideas welcomed.  The usual 4 bearing water 
cooled 24k 1.5 horse motor.



Most of the issue is I've been unable to get my head around the values in the tool 
table.  Sometimes the actual length of the tool >from the spindle works, other 
times it's an odd value determined from probing.


You've company in that boat.


For now I've put it aside while I play with my new tool;  a 12" box pan brake which bought on 
sale but has, shall we say: "Issues".  >To be expected for something as cheap as it 
was.  I'm about 1/3rd of the way through modeling it in AlibreCAD so I can figure out >how to 
modify it to fix it.

So tool setter, tool probe, probe screen etc on hold for a while yet.
John



-Original Message-
From: Leonardo Marsaglia [mailto:ldmarsag...@gmail.com]
Sent: January-03-23 7:24 AM
To: Enhanced Machine Controller (EMC)
Subject: [Emc-users] Happy new year and also checking if the list is alive

Hi everybody!

First of all happy new year to all :)

I'm wondering if there's low activity or if there's a problem with the list
or my subscription because it's been several days without messages and
seems strange.

Thank you and stay well!

___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users




___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.


Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
 - Louis D. Brandeis
Genes Web page 



___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] Happy new year and also checking if the list isalive

[gene heskett]

On 1/3/23 11:36, marcus.bow...@visible.eclipse.co.uk wrote:

Happy New Year to you, Leonardo, and to everyone else on the list.
Like you, I haven't seen much activity so I assumed everyone was either 
eating or had escaped to the workshop.
I had regular messages up until 23rd December, then one on 28th December 
but no activity after that until your email.


Marcus


Same here Marcus, except I did get one from Sam S. on the 23rd. but 
between the 18th and now Leonard's question, that is it. Big hole in 
traffic.


Happy and better New Year everybody.

Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
 - Louis D. Brandeis
Genes Web page 



___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] Happy new year and also checking if the list is alive

[gene heskett]

On 1/3/23 10:25, Leonardo Marsaglia wrote:

Hi everybody!

First of all happy new year to all :)

I'm wondering if there's low activity or if there's a problem with the list
or my subscription because it's been several days without messages and
seems strange.

Thank you and stay well!

Its been awful quiet here too Leonardo. The last post was on the 28th of 
Dec 2022, at 6:03 my time. (American EST)

___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.


Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
 - Louis D. Brandeis
Genes Web page 



___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] Happy new year and also checking if the list is alive

[John Dammeyer]

Happy New Year everyone. 
Yes I noticed the list was quiet.  
I decided to put work with the tool setter/probe stuff on hold due to 
frustration.  I'm rereading
https://forum.linuxcnc.org/49-basic-configuration/29187-work-with-probe
and now on page 37 to try and get a handle on what I'm doing wrong or what I 
need to do for my situation. 

It doesn't help that GIT allows multiple branches to develop each with 
different changes, some desired, some not.  I finally figured out I was using 
the Probe_V2 master which has the support for the Linux 2.8 and up.  

I have the macros etc working so that on each tool change the tool is measured 
with the tool setter.  
I've yet to get working anything that uses existing values in the tool table 
and if the length is 0 then go use the setter.

Most of the issue is I've been unable to get my head around the values in the 
tool table.  Sometimes the actual length of the tool from the spindle works, 
other times it's an odd value determined from probing.

For now I've put it aside while I play with my new tool;  a 12" box pan brake 
which bought on sale but has, shall we say: "Issues".  To be expected for 
something as cheap as it was.  I'm about 1/3rd of the way through modeling it 
in AlibreCAD so I can figure out how to modify it to fix it.

So tool setter, tool probe, probe screen etc on hold for a while yet.
John


> -Original Message-
> From: Leonardo Marsaglia [mailto:ldmarsag...@gmail.com]
> Sent: January-03-23 7:24 AM
> To: Enhanced Machine Controller (EMC)
> Subject: [Emc-users] Happy new year and also checking if the list is alive
> 
> Hi everybody!
> 
> First of all happy new year to all :)
> 
> I'm wondering if there's low activity or if there's a problem with the list
> or my subscription because it's been several days without messages and
> seems strange.
> 
> Thank you and stay well!
> 
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users



___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] Happy new year and also checking if the list is alive

[Scott Harwell via Emc-users]

 You are correct. I missed the 12/28 message on my search.
Scott

On Tuesday, January 3, 2023 at 10:38:07 AM CST, 
marcus.bow...@visible.eclipse.co.uk  
wrote:  
 
 Happy New Year to you, Leonardo, and to everyone else on the list.
Like you, I haven't seen much activity so I assumed everyone was either 
eating or had escaped to the workshop.
I had regular messages up until 23rd December, then one on 28th December 
but no activity after that until your email.

Marcus


On 2023-01-03 15:24, Leonardo Marsaglia wrote:
> Hi everybody!
> 
> First of all happy new year to all :)
> 
> I'm wondering if there's low activity or if there's a problem with the 
> list
> or my subscription because it's been several days without messages and
> seems strange.
> 
> Thank you and stay well!
> 
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users


___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
  
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] Happy new year and also checking if the list is alive

[marcus . bowman]

Happy New Year to you, Leonardo, and to everyone else on the list.
Like you, I haven't seen much activity so I assumed everyone was either 
eating or had escaped to the workshop.
I had regular messages up until 23rd December, then one on 28th December 
but no activity after that until your email.


Marcus


On 2023-01-03 15:24, Leonardo Marsaglia wrote:

Hi everybody!

First of all happy new year to all :)

I'm wondering if there's low activity or if there's a problem with the 
list

or my subscription because it's been several days without messages and
seems strange.

Thank you and stay well!

___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users



___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] Happy new year and also checking if the list is alive

[Scott Harwell via Emc-users]

 Yours is the first post I have after 12/22/2022.


On Tuesday, January 3, 2023 at 09:28:25 AM CST, Leonardo Marsaglia 
 wrote:  
 
 Hi everybody!

First of all happy new year to all :)

I'm wondering if there's low activity or if there's a problem with the list
or my subscription because it's been several days without messages and
seems strange.

Thank you and stay well!

___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
  
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

[Emc-users] Happy new year and also checking if the list is alive

[Leonardo Marsaglia]

Hi everybody!

First of all happy new year to all :)

I'm wondering if there's low activity or if there's a problem with the list
or my subscription because it's been several days without messages and
seems strange.

Thank you and stay well!

___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users